BUXTON BTW 5800 Wireless Stereo Earphones User Manual

BUXTON BTW 5800 Wireless Stereo Earphones

Safety instructions

This product has been designed with the utmost safety in mind. However, incorrect use may lead to electric shock or fire. This is why users should observe the following instructions when using this device. This device uses a semiconductor unit and contains no user-serviceable parts. Do not disassemble this device, otherwise, you are exposed to the risk of electric shock. If any damage to this product occurs, please have this product repaired by a qualified service technician.

Power source
The power supply of this unit must be match the serial plate data.
Heat source
Keep this unit out of heat sources like stove or direct sunlight.
Cleaning
Prior to cleaning, please disconnect power first. For cleaning, don’t use liquid detergents or caustic liquids – just clean the unit with a soft cloth.

Heavy objects
Do not place heavy objects on this unit, otherwise the unit may be damaged.
Faults to be repaired
If any of the following problems occurs, please disconnect power to the unit and contact a qualified service technician.

• A. The power cord or plug has been damaged.

• B. Fluids or other foreign objects have entered the unit.

• C. If the unit does not work, even though you operate it according to the instructions,
  do not press any buttons other than those listed. Otherwise, damage to this unit may occur along with a more demanding repair.

• D. The unit fell from a high place to the ground.

• E. There is a smell of burning from inside the unit.

Maintenance

If you don’t have enough technical knowledge necessary to maintain this unit, don’t attempt to repair it by yourself. By removing the cover, you are exposed to a risk of electric shock. If needed, please contact a qualified service technician.

Replacement of parts
If you need to replace any part of this unit, ask your service technician to make a replacement for equal spare part models. Replacement with other models of spare parts may cause serious malfunction, electric shock or shorten the life of the device.

Safety inspection
When done with the maintenance, ask your service technician to perform an on- site safety check to make sure that the unit’s operation is safe.
Note:
Before using this product, read these instructions carefully and keep it well for future use.

WARNING
Extremely loud music can mask traffic sounds or other danger signals. Make sure you never lose track of what’s happening in your surroundings.

Supply content

• A)  “L” and “R” earphone
• B)  1× Charging case
• C)  1× User’s manual
• D)  1× USB-C charging cable

Description of the BT earphones

– answer the call

| 1 x long touch (2 seconds) during an incoming call – call rejection
| 1 x short touch during an ongoing call – ending the call
| 1 x short touch – play function
| 1 x short touch – pause function
| Left earphone
6| Long touch – volume down
| 2 x short touch – previous track
| 3 x short touch – launch SIRI/Google Assistant
| Right earphone
6| Long touch – volume up
| 2 x short touch – next track
| 3 x short touch – Game mode / Music mode
7| LED indicator, microphone
8| Recharging contacts

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully. Before using the earphones for the first time, remove the protective film from the charging contacts on the bottom of the earphones and return them to the charging case. Start charging the charging case and the earphones to the maximum level.

Turning on the earphones:  Taking the earphones out of the case will automatically switch them on. If the earphones are turned off outside the charging case, press and hold the touch pad on each earphone and wait for the “BUXTON” greeting.

Turning off the earphones:  Inserting the earphones into the charging case will automatically turn them off. They can also be turned off by long pressing and holding the touch pad until the “SEE YOU” message appears in unpaired mode.

Pairing the earphones with each other:  The earphones are already paired from the factory and do not need to be paired with each other. (If pairing to TWS mode fails, return the earphones to the charging case and repeat the above instructions.)

Caution:  To prevent damage to your hearing,  always keep the volume level of your device to a minimum before connecting BT earphones to your mobile device. Keep the touch pad clean and avoid touching other objects or body parts such as hair.

Note:  If the BT earphones are not paired with any device, they will turn off when you are idle for a long time. Put them in the case.

To pair BT earphones with your mobile device, do the following

Remove the earphones from the charging case and search for the Bluetooth name of the earphones “BTW 5800” on the device you want to pair and start the pairing process. If you are asked to enter a pairing code when pairing your device and BT earphones, use the code: “0000”. To cancel pairing, disconnect the BT earphones (cancel Bluetooth pairing) on your mobile device.

Note: To ensure a stable Bluetooth connection, keep a distance of up to 10 metres between the BT earphones and the paired device. Depending on ambient interference, in some cases it may be necessary to keep a shorter distance between the BT earphones and the paired device.

Charging

• A charged battery lasts for several hours of operation at normal volumes. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
• When the BT earphones are placed in the charging case, the case display shows the charge status of the BT earphones and the charging case:
• The displayed percentages indicate the battery charge level of the charging case. The charging case displays 100% when fully charged.
• The gradually increasing green colour on the indicator shows the charging status of the earphones. (Left side for left earphone “L”, right side for right earphone “R”.)
• You can check the battery level of the charging case by opening and closing the charging case. The charge level of the case will then be displayed.

Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only after a low state of charge (10% – 20%) has been reported. Charge continuously until fully charged. If the battery discharges quickly during operation, its lifetime is over. For more information, we recommend contacting an authorised service centre.

Recommendation: If your earphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months. We recommend storing the BT earphones together with the charging case with a charged battery to avoid irreversible battery damage (loss of capacity).

Technical specifications

• Bluetooth:  V5.1 BLE
• Bluetooth frequency response range:   2.4–2.4835 GHz
• Maximum transmitter power:  100mW
• BT connection range:  10m
• BT profiles:  A2DP 1.3, AVRCP 1.6, HFP 1.7, HSP 1.2
• Bluetooth frequency response range:   2.4-2.4835GHz
• Chipset:  Jieli AD6973D4
• Codec:  AAC, SBC
• Diameter of inverters:  13mm
• One microphone per earphone – handsfree ready
• Earphones charging indicator
• Playback time per charge:  up to 7 h  (80% volume)
• Total playback time:  up to 26 hours  (80% volume)
• Call time:  up to 8 h
• Standby time:  up to 210 h
• Earphone charging time:  1.5 h
• Case charging time:  1.5 h
• The battery capacity of one earphone:   45 mAh / 3.7 V
• Charging case battery capacity: 390 mAh / 3.7 V
• Charging port: USB-C (DC 5 V / 300 mA)
• Frequency range: 20 Hz – 20,000 Hz
• Sensitivity: 93dB +/- 3dB @ 1kHz
• Impedance: 16 Ω ± 15%
• Weight of one earphone: 4.6 g
• Charging case weight: 32 g
• Charging case dimensions: 65 × 52.5 × 28.5 mm (W × H × D)
• Package contents: TWS earphones, charging case, USB-C charging cable, user’s manual

Please read these instructions carefully before use.

Safety warning

• Do not place sources of open flames, such as lit candles, on the device.
• Dispose of batteries in an environmentally friendly manner, taking into account the environmental impact of battery disposal.
• Do not expose batteries (installed batteries) to excessive heat, such as fire.

Warning: To avoid possible hearing damage,  do not listen to high-volume sounds for long periods of time. For safety reasons, be aware of your surroundings when using earphones. Not suitable for children.

DISPOSAL OF DISCARDED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol placed on the product, accessories or package notifies that the product must not be treated as household waste. Please dispose of this product in a collection center designed for recycling electric and electronic equipment. In some EU or European countries, you can return your products to your local dealer when buying a new equivalent product. Correct disposal of this product helps save valuable natural resources and prevents possible adverse impacts on the environment and human health that might be caused by improper waste disposal. For further information, please contact your local authorities or the nearest waste disposal collection center. Improper disposal of this type of waste may lead to penalties under the law.

For EU companies
If you need to dispose of an electric or electronic device, ask your dealer your supplier for the necessary information.

Disposal in countries outside the European Union
If you wish to dispose of this product, please ask your local authorities or your dealer for the information necessary for the correct disposal method.

This product complies with all relevant EU basic regulatory requirements.

Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes. FAST ČR, a. s. hereby declares that the radio equipment type BTW 3300 complies with Directive 2014/53/EU.

The complete version of the EU Declaration of Conformity can be found at: www.buxton.cz

CONTACTS

• Manufacturer: FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic
• Service coordinator for the Czech Republic: FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic;
• phone: 323204120
• FAST ČR, a.s., Cejl 31, Brno 602 00, Czech Republic;
• phone: 531010295

References

• Sluchátka Buxton - vstup do svÄ›ta hudby | Buxton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>