BUXTON BBS 7700 Waterproof Wireless Speaker User Manual
- June 3, 2024
- BUXTON
Table of Contents
BBS 7700 Waterproof Wireless Speaker
User Manual
Safety Instructions
This product has been designed with the utmost safety in mind.. However,
incorrect use may lead to electric shock or fi re. This is why users should
observe the following instructions when using this device.
This device uses a semiconductor unit and contains no user serviceable parts.
Do not disassemble this device, otherwise you are exposed to the risk of
electric shock. If any damage to this product occurs, please have this product
repaired by a qualifi ed service technician.
1.1 Power source
Power supply of this unit must be match the serial plate data.
1.2 Heat source
Keep this unit out of heat sources like stove or direct sunlight.
1.3 Cleaning
Prior to cleaning, please disconnect power fi rst. For cleaning, don’t use
liquid detergents or caustic liquids – just clean the unit with a soft cloth.
1.4 Heavy objects
Do not place heavy objects on the unit, otherwise damage might occur.
1.5 Connecting other devices
Before connecting other devices to this unit, please make sure to disconnect
power. Otherwise damage to the unit or personal injury might occur.
1.6 Faults to be repaired
If any of the following problems occurs, please disconnect power to the unit
and contact a qualifi ed service technician.
A. Power cord or plug is damaged.
B. Liquids or other foreign objects have penetrated inside the product.
C. If the unit does not work even if it’s being operated according to the
instructions, don’t press any buttons other than those described in these
instructions. Otherwise, damage to this unit may occur along with a more
demanding repair.
D. This unit has fallen on the ground from a big height.
E. Burns can be smelled from the product inside.
1.7 Maintenance
If you don’t have enough technical knowledge necessary to maintain this unit,
don’t attempt to repair it by yourself. By removing the cover, you are exposed
to a risk of electric shock. If needed, please contact a qualifi ed service
technician.
1.8 Replacement of parts
If you need to replace any part of this unit, ask your service technician to
make a replacement for equal spare part models. If other spare part models are
used for replacement, serious damage, electric shock or shortening the unit’s
lifetime may occur.
1.9 Safety check
When done with the maintenance, ask your service technician to perform an on-
site safety check to make sure that the unit’s operation is safe.
Note:
Before using this product, read these instructions carefully and keep it well
for future use.
Supply content
I BT speaker
II 3.5mm audio jack
III USB-C charging cable
IV User’s manual
BT speaker description
- TWS button (True Wireless Stereo) – connecting two BBS 7700 speakers
- TWS LED indicator
- Microphone
- Bluetooth button – fast Bluetooth function selection, light eff ects on/off
- Previous track button, volume down
- Battery status LED
- Next track button, volume up
- Play/Pause button, incoming call answering/ rejecting
- Bluetooth LED indicator
- On/off button, audio input change
- Charging socket (USB-C)
- LED charging indicator
- File playback USB slot, Power bank feature
- Socket for audio AUX IN mini jack (3.5 mm)
Putting into operation
Before fi rst use, be sure to read the safety instructions contained in this
user’s manual carefully.
Before fi rst use, please charge the BT speaker to a maximum level. Hold down
the power On button to turn on the BT speaker. Turning on/off is indicated by a
sound signal. To turn the BT speaker off , hold down the power On button.
Caution: After a longer period of inactivity, the appliance will turns itself
off .
Pairing devices via Bluetooth
Turn on the BT speaker and search for its Bluetooth name “BBS 7700” in the
device to which you wish to pair and start the pairing process. If you are
requested to enter a pairing code while your device and the BT speaker are
pairing, use the code: “0000”. To disconnect a paired device, hold down the
Bluetooth button until LED starts blinking blue on the unit.
Note: To ensure a stable Bluetooth connection, make sure that the
distance between the BT speaker and your connected device is kept within 10
meters.
Caution: Some connected devices support common volume setting. If some of
the connected devices do not support this feature, the volume setting will
operate separately on each device.
TWS function
If you buy another Bluetooth speaker („BBS 7700“), you can pair both speakers
together for optimum stereo sound. First, make sure your device is not
connected to any BT speaker. Turn both BT speakers on, press the TWS button
briefl y and wait until they are paired automatically. The orange LED indicator
will stop blinking and remain lit on both devices when the BT speakers are
paired.
Changing the volume level using the volume control buttons will take eff ect
automatically on both paired BT speakers. Pressing and holding the Power On
button on one of the speakers will turn both paired speakers off .
Note: If the BT speakers fail to be paired successfully, hold down the
TWS button on both speakers until the speakers show message „true wireles
cleared“.
Audio AUX IN
The BT speaker is equipped with a 3.5mm jack. Your device can be connected to
the BT speaker via the supplied audio cable. First connect the audio connector
to your appliance and then into the socket in the BT speaker.
Notice: before connecting your device and speaker, ensure that the output
signal from your device is at its minimum level (minimum output volume). This
will prevent the BT speaker from damage. When the audio cable is connected,
the BT speaker does not meet the water ingression protection class.
Note: In this mode, not all functions of the BT speaker are available.
The Bluetooth function is not active if the audio jack is connected to the BT
speaker.
Play/Pause button
8.10 Press the Play/Pause button
to start or pause music playback during Bluetooth connection or while a USB
memory media is inserted.
8.11 The incoming call to a Bluetooth
connected paired device will be accompanied by an acoustic signal which will
interrupt the music being played back. To answer/hang
up an incoming call, press the Play/Pause button briefl y. To reject an
incoming call, double-press the Play/Pause button quickly.
Note: The reception of the BT speaker’s microphone may be attenuated due
to the device’s water resistance. To improve the reception, please speak loud
and in the vicinity of the BT speaker.
Volume and track playback control
To control the BT speaker’s volume (+/- buttons), use the buttons on the BT
speaker. During music playback, you can press and hold the “+” button to jump
to the next track playback. To select the previous track, press and hold the
“−” button.
USB-A port
10.1 Playing music
Insert the USB storage disc with audio content in the USB slot. Press the
on/off button briefl y to switch to the “USB mode”. The music playback from the
connected storage will start automatically. Please record your music
on the storage in the same order as it’s to be played back from the BT
speaker.
Caution: Due to a number of devices on the market, compatibility and
playback support are not guaranteed for all media. The memory devices you want
to connect should be tested in advance and/or formatted as FAT32. The playback
of protected media, fi les or content stored inside them may fail. While the
USB storage is connected, the speaker does not meet the water ingression
protection class.
10.2 Power bank feature
The BT speaker can be also used as a Power bank to charge another portable
devices. Lift the protective cover of the sockets at the BT speaker’s rear and
connect your portable device’s charging cable to the USB port. Charging takes
place automatically in the BT speaker’s on and off mode and is indicated by an
LED located under the USB
connector.
Caution: The Power bank function is a supplementary feature that is no
substitute of a full-fledged charging of portable devices by charging adapters.
While the BT speaker is used in the Power bank mode, the BT speaker does not
meet the water ingression protection class.
Charging the BT speaker
A charged battery provides power for several hours of operation at normal
volume levels. A high volume consumes more battery power; therefore, we
recommend listening at normal volume levels. To charge the BT speaker, please
connect the charging adapter to the mains and then to the BT speaker. While
the charging is in progress, the battery status indicator will gradually show
the charge level using four LED indicators. A low battery level will be
indicated by an audible alert and a fl ashing LED indicator with the music
playback volume being reduced at the same time.
Caution: For charging, use only the original accessories supplied with
the appliance. To achieve the maximum battery lifetime, it is best not to
start charging until the low battery audible alert is output. Charge
continuously until fully charged. When the battery operating time becomes very
short, the battery lifetime has been used up; we recommend that you have the
battery replaced at your authorized centre.
Recommendation: If the unit is not to be used for an extended period of
time, we recommend to fully charge the battery once every two to three months.
We recommend to store the unit with a the battery charged to prevent
irreparable damage to the battery (loss of capacity).
Light eff ects
The BT speaker is equipped with lighting eff ects in the compartment of passive
emitters. To turn the light eff ect on/off , press the Bluetooth button twice
briefl y.
Ingression protection (IPX7)
The unit is resistant against water thus allowing you to listen to your music
in bath, shower, on the beach or by the pool. IPX7 water resistance guarantees
the unit’s function with slight splashing or immersing in water 1 m deep for
up to 30 minutes. Full immersion is not recommended because of possible loss
of the audio playback signal.
Caution: Remember to always seal the BT speaker’s inputs with original
blind plugs (No. 11 through 14 in fi gure “description of the BT speaker”) and
make sure the plugs are not damaged. Never charge the unit during possible
contact with fl uids. The unit is designed for contact with clean water only
without any additives. Avoid exposing the unit to contaminated or industrially
treated fl uids (such as lemonade, sea/salt water, oils, etc.).
Speaker reset
If the BT speaker freezes or the Bluetooth connection fails, please use the
Reset feature. Hold down the BT speaker power button for 10 seconds to reset
the device.
Technical specifications
BT speaker power output: 30W RMS (2×15W RMS) 2 speakers + 2 passive radiators
Speaker diameter: 57mm
Protection level: IPX7
Bluetooth V5.0
BT profi les: A2DP 1.3, AVRCP 1.6, HFP 1.7, SPP 1.2
Codec: SBC DSP (digital signal processor)
USB port (music playback, Power bank feature)
Supported audio formats: FLAC, MP3, WMA
AUX external input (3.5mm stereo jack)
Maximum playback time: up to 9 hours
Maximum standby time: up to 45 hours
Maximum charging time: ≤ 4h
Maximum connecting distance: up to 15m
Frequency response: 80Hz – 16,000Hz
Sensitivity: 90 +/- 3dB @ 1kHz
Impedance: 6 Ω ± 10%
Rechargeable battery: 2500mAh / 7.4V Li-Ion (5000mAh/3.7V)
Charging port: USB-C (DC 5V/2A)
Package contents: BT speaker, USB charging cable, 3.5mm
jack to jack audio cable, user’s manual
Dimensions: 230 × 103 × 98mm (W × H × D)
Weight: 1098g
Bluetooth
Version: 5.0
Maximum transmitter power: 100mW @ 2.4GHz – 2.4835GHz
Profi les: AVRCP, A2DP, HFP, SPP
Codec: SBC
**DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
**
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of
this product at your applicable collection point for the recycling of
electrical & electronic equipment waste. Alternatively in some states of the
European Union or other European states you may return your products to your
local retailer when buying an equivalent new product. The correct disposal of
this product will help save valuable natural resources and help in preventing
the potential negative impact on the environment and human health, which could
be caused as a result of improper liquidation of waste. Please ask your local
authorities or the nearest waste collection centre for further details. The
improper disposal of this type of waste may fall subject to national
regulations for fi nes.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from local government departments or from
your seller.
**** This product meets all the basic EU regulation requirements that relate
to it.
Changes to the text, design and technical specifi cations may occur without
prior notice and we reserve the right to make these changes.
FAST ČR, a.s. hereby declares that the radio device type BBS 7700 conforms to
the 2014/53/EU directive.
For full version of the EU declaration of conformity, please refer to:
www.buxton.cz
Address of the manufacturer: FAST ČR, a. s., U Sanitasu 1621, Říčany CZ-251
01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>