KLARSTEIN 10034270 Electric Fireplace Instruction Manual

June 5, 2024
Klarstein

KLARSTEIN logo

MEGÈVE
Electric Fireplace

10034270
www.klarstein.com

Note: This product is only suitable for well-insulated spaces or occasional use.

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10034270

TECHNICAL DATA

Item number 10034270
Power supply 220-240 V ~ 50/60 Hz
Power consumption 1750-1950 W

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

SAFETY INSTRUCTIONS

  • Do not use the appliance until it is securely fixed as described in this manual.
  • Check that the voltage indicates on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply. • If the supply cord is damaged, it must be replaced by a qualified engineer in order to avoid a hazard.
  • The fireplace heater must not be positioned directly under the power socket.
  • Keep furniture, curtains, and other flammable material at least 1 meter away from the appliance.
  • Do not leave the appliance unattended during use.
  • Do not leave the appliance unattended whilst connected to the mains supply.
  • Keep out of reach of children and do not allow them to operate this appliance.
  • This appliance is intended for household use only and should not be used for industrial purposes.
  • Do not operate this appliance after a malfunction or after being damaged in any way.
  • Repairs to electrical appliances should only be performed by a qualified electrician.
  • Improper repairs may place users at serious risk.
  • Do not run the mains cable under carpets, rugs, etc.
  • Do not allow the main cable to hang over sharp edges or come in contact with hot surfaces.
  • In order to avoid overheating, do not cover the heater.
  • Do not use this heater with a programmer, timer, separate remote control system, or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
  • Never immerse the product in water or any other liquid for any reason.
  • Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
  • Do not use the appliance outdoors.
  • Do not use if you have wet hands.
  • Never use the appliance on or near hot surfaces.
  • Do not operate with a damaged cord.
  • Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.
  • Do not clean the appliance with abrasive chemicals.
  • Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance.
  • This device may be only used by children 8 years old or older and persons with limited physical, sensory, and mental capabilities and/or lack of experience and knowledge, provided that they have been instructed in the use of the device by a responsible person who understands the associated risks.
  • Children should be supervised to ensure that they do not play with the appliance.

CAUTION
Risk of burns! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

PRODUCT DATA SHEET

Model identiller(s): 10034270
Item Symbol
Heat output

only
Nominal heat output| | 1.9| kW| | manual heat charge control, with integrated thermostat| N/A
Minimum heat output (indicative)| | N/W| kW| | manual heat charge control with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| | 1.9| kW| | electronic heat charge control with room and/or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fan assisted heat output| N/A
At nominal heat output| | 1.956| kW| | Type of heat output/room temperature control
At minimum heat output| | N/A| kW| | single-stage heat output and no room temperature control| no
In standby mode| | N/A| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| yes
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| no
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chol-Tec GmbH, Wallstraiie 16, 10 79, Berlin, Germany

ASSEMBLY

  • Remove all parts and hardware from the box and place them on a clean, soft, and dry surface.
  • Make sure that all parts are dry and that the power cord and plug are not damaged.
  • Compare the contents with the parts list to make sure nothing is missing.
  • Dispose of all packing materials properly and recycle them whenever possible.

Note: A Phillips screwdriver is required for assembly.
Parts list

A Fireplace (1 piece)
B Feet (4 pieces)
C Screws (12 pieces)

Mounting the feet
Note: Before assembling, make sure that the unit is disconnected from the power supply. Never install, move or clean the heater while it is connected.

  1. Turn the heater (A) carefully upside down and lay it on a clean, soft surface.
  2. Place the foot (B) on the corner of the chimney frame.
  3. Fasten the base with two screws (C). Tighten the screws only slightly for the time being.
  4. Repeat steps 2 and 3 for the other three feet.
  5. Check the alignment of the feet and then tighten all 8 screws with the screwdriver, but not too tight.

Note: Fasten the feet before first use! Never connect this unit if the feet are not securely attached.

OPERATION

Note: The control panel is located in the lower right corner of the heater. Open the door to access the control panel.

Functions

Control Description
ON/OFF Set the power switch to ON, the power indicator will illuminate and

the flame effect will illuminate. Set the power switch to OFF, all functions will be turned off.
Flame Intensity| Turn the knob to the right (+) to enhance the flame effect Turn the knob to the left (-) to dim the flame effect. Note: The ON/ OFF switch turns the flame effect on and off. The flame effect will not be turned off until the switch is set to OFF.
Thermostat| The thermostat controls the temperature and keeps it constant. Turn the knob to the right (+) to increase the temperature.
Turn the knob to the left (-) to decrease the temperature. The heater will automatically turn on and off to maintain the set temperature. Note: If the room temperature is higher than the thermostat setting, the heater will not turn on.

Note: During the first use, an odor may be created by the materials used in the device. The smell is normal and disappears after a short time.

CLEANING AND CARE

Note: Turn off the power and unplug the appliance from the wall outlet. Wait until the appliance has cooled down completely before cleaning.

Metal parts| Polish the metal parts with a soft cloth and a household
cleaner containing orange and citrus oil. Do not use brass care products or household cleaners as they will damage the metal.
---|---
Glass parts| Use glass cleaner and dry the glass thoroughly with a lint-free cloth. Never use abrasive cleaners as they will scratch the surface.
Plastic parts| Wipe the parts with a slightly damp cloth and a mild solution of dishwashing detergent and warm water.
Ventilation slits| Use a vacuum cleaner or feather duster to remove dust and dirt from the ventilation slots.
Storage| If you will not be using the unit for a long time, store it in a dry, clean place.

HINTS ON DISPOSAL

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals