BUXTON BTW 3300 Wireless Stereo Earphones User Manual

BUXTON BTW 3300 Wireless Stereo Earphones

Safety instructions

This product has been designed with the utmost safety in mind. However, incorrect use may lead to electric shock or fire. This is why users should observe the following instructions when using this device.
This device uses a semiconductor unit and contains no user serviceable parts. Do not disassemble this device, otherwise you are exposed to the risk of electric shock. If any damage to this product occurs, please have this product repaired by a qualified service technician.
Power source
Power supply of this unit must be match the serial plate data.
Heat source
Keep this unit out of heat sources like stove or direct sunlight.
Cleaning
Prior to cleaning, please disconnect power first. For cleaning, don’t use liquid detergents or caustic liquids – just clean the unit with a soft cloth.

Heavy objects
Do not place heavy objects on this unit, otherwise the unit may be damaged.
Faults to be repaired
If any of the following problems occurs, please disconnect power to the unit and contact a qualified service technician.

• A. The power cord or plug has been damaged.

• B. Fluids or other foreign objects have entered the unit.

• C. If the unit does not work, even though you operate it according to the instructions,
  do not press any buttons other than those listed. Otherwise, damage to this unit may occur along with a more demanding repair.

• D. The unit fell from a high place to the ground.

• E. There is a smell of burning from inside the unit.

Maintenance

If you don’t have enough technical knowledge necessary to maintain this unit, don’t attempt to repair it by yourself. By removing the cover, you are exposed to a risk of electric shock. If needed, please contact a qualified service technician.

Replacement of parts
If you need to replace any part of this unit, ask your service technician to make a replacement for equal spare part models. Replacement with other models of spare parts may cause serious malfunction, electric shock or shorten the life of the device.

Safety inspection
When done with the maintenance, ask your service technician to perform an on- site safety check to make sure that the unit’s operation is safe.
Note:
Before using this product, read these instructions carefully and keep it well for future use.

WARNING
Extremely loud music can mask traffic sounds or other danger signals. Make sure you never lose track of what’s happening in your surroundings.

Supply content

• A) “L” and “R” earphone
• B) 1× Charging case
• C) 1× User’s manual
• D) 1× USB-C charging cable

Description of the BT earphones

call – answer the call

 | 1× long touch (2 seconds) during an

incoming call – call rejection

 | 2× short touch during an ongoing call

– ending the call

 | 1× short touch – play function
 | 1× short touch – pause function
 | 3× short touch – launch SIRI / Goog-

le assistant

 | Left earphone
5| Long touch – volume down
 | 2 x short touch – previous track
 | Right earphone
5| Long touch – volume up
 | 2× short touch – next track

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
Before using the earphones for the first time, remove the protective film from the charging contacts on the bottom of the earphones and return them to the charging case. Start charging the charging case and the earphones to the maximum level.
Turning on the earphones – Taking the  earphones out of the case will automatically switch them on. When the earphones are in the off state outside the charging case, press and hold the touch pad on each earphone and wait for the earphone to announce the “BUXTON” greeting.
Turning off the earphones –  Put the  earphones in the charging case. The earphones will automatically switch off. Long press and hold the touch pad of the earphones until the message “SEE YOU” is heard.

Pairing the earphones with each other – The earphones are already paired from the factory and do not need to be paired with each other. (If pairing to TWS mode fails, return the earphones to the charging case and repeat the above instructions.)
Caution: To prevent damage to your hearing,  always keep the volume level of your device to a minimum before connecting BT earphones to your mobile device. Keep the touch pad clean and avoid touching other objects or body parts such as hair.
Note: If the BT earphones are not paired with any device, they will turn off when you are idle for a long time. Put them in the case.

Pairing your earphones via Bluetooth

To pair the BT earphones with your mobile device, do the following:
Remove the earphones from the charging case (blue intermittent earphone indication) and look for the Bluetooth earphone name
“BTW 3300” in the device you want to pair  and start the pairing process. If you are asked to enter a pairing code when pairing your device and BT earphones, use the code “0000”.
To cancel pairing, disconnect the BT earphones (cancel Bluetooth pairing) on your mobile device.
Note: To ensure a stable Bluetooth  connection, keep a distance of up to 10 metres between the BT earphones and the paired device. Depending on ambient interference, in some cases it may be necessary to maintain a shorter distance between the BT earphones and the paired device.

Charging

• A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
• When the BT earphones are placed in the charging case, the LED indicator of the case shows:
• a blue solid light indicates the case is charging and a red solid light indicates the earphones are charging.
• When the USB-C charging cable is connected, the intermittent red indication shows the charging of the charging case.
• A discharged charging case is indicated by a blue intermittent light – connect the charging cable.
• Caution: For charging, use only the original accessories supplied with the appliance. To maximize battery life, it is advisable to start charging the battery only after a low battery condition (10–20%) has been reported. Charge continuously until fully charged. If the battery life is already very short, it is exhausted and we recommend you contact an authorised service centre for more information.
  Tip: A low battery is first reported at 20% and then at 10%. We recommend that you place the earphones in the rechargeable box and charge them to full level when the battery level is first reported low.
  Recommendation: If your earphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months. We recommend storing the BT earphones together with the charging case with a charged battery to avoid irreversible damage to the batteries (loss of capacity).

Technical specifications

• Bluetooth: V5.1 BLE
• Bluetooth frequency response range:   2.4–2.4835 GHz
• Maximum transmitter power: 100mW
• BT connection range: 10m
• BT profiles: A2DP 1.3, AVRCP 1.6, HFP 1.7, HSP 1.2
• Bluetooth frequency response range:   2.4-2.4835GHz
• Chipset: Jieli AD6973D4
• Codec: AAC, SBC
• Diameter of inverters: 13mm
• One microphone per earphone – handsfree ready
• Earphones charging indicator
• Playback time per charge: up to 7 h  (80% volume)
• Total playback time: up to 26 hours  (80% volume)
• Call time: up to 8 h
• Standby time: up to 210 h
• Earphones charging time: 1.5 h
• Case charging time: 1.5 h
• Battery capacity of one earphone:   45 mAh / 3.7 V
• Charging case battery capacity: 350 mAh / 3.7 V
• Charging port: USB-C (DC 5 V / 300 mA) Frequency range: 20 Hz – 20,000 Hz Sensitivity: 92 dB ± 3 dB @ 1kHz Impedance: 32 Ω ± 15%
• Weight of one earphone: 3.7 g
• Charging case weight : 29 g
• Charging case dimensions: 53.8 × 44 × 30 mm W × H × D
• Package contents: TWS earphones, charging case, USB-C charging cable, user’s manual

Please read these instructions carefully before use.

Safety warning

• Do not place sources of open flame, such as lit candles, on the device.
• Dispose of batteries in an environmentally friendly manner, taking into account the environmental impact of battery disposal.
• Do not expose batteries (installed batteries) to excessive heat, such as fire.
• Warning: To avoid possible hearing damage,  do not listen to high volume sound for long periods of time. For safety reasons, be aware of your surroundings when using the earphones. Not suitable for children.

DISPOSAL OF DISCARDED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol placed on the product, accessories or package notifies that the product must not be treated  as household waste. Please dispose of this product in a collection centre designed for recycling electric  and electronic equipment. In some EU or European countries, you can return your products to your  local dealer when buying a new equivalent product. Correct disposal of this product helps save valuable  natural resources and prevents possible adverse impacts on the environment and human health that might be caused by improper waste disposal. For further information, please contact your local authorities or the nearest waste disposal  collection centre. Improper disposal of this type of waste may lead to penalties under the law.

For EU companies
If you need to dispose of an electric or electronic device, ask your dealer your supplier for necessary information.

Disposal in countries outside the European Union
If you wish to dispose of this product, please ask your local authorities or your dealer for the information necessary for the correct disposal  method.

This product complies with all relevant EU basic regulatory requirements.

Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes.
FAST ČR, a. s. hereby declares that the radio equipment type
BTW 3300 complies with Directive 2014/53/EU.
The complete version of the EU Declaration of Conformity can be found at: www.buxton.cz
Manufacturer: FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic
Service coordinator for the Czech Republic:
FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic;  phone: 323204120
FAST ČR, a.s., Cejl 31, Brno 602 00, Czech Republic;  phone: 531010295

References

• Sluchátka Buxton - vstup do svÄ›ta hudby | Buxton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>