VISIONIS VIS-3031 Indoor Access Control Biometric Fingerprint Reader Standalone User Manual
- May 15, 2024
- VISIONIS
Table of Contents
VISIONIS VIS-3031 Indoor Access Control Biometric Fingerprint Reader
Standalone
Product Information
Specifications
- Communication: TCP/IP
- Communication Rate : 10M/100M
- User Capacity: 3,000
- Record Capacity : 70,000
- Alarm Record Capacity: 20,000
- Exit Button: 1
- Door-Magnet : 1
- Authentication Mode: Fingerprint/Card (ID or IC) / Password
Advanced Features
- Reader Interface : 1
- Input Protection: TVS lightning protection, PTC surge protection
- Output Protection: Varistor Protection
- Working Voltage: DC12V
- Working Current: Non-load
Product Usage Instructions
- Connect the device to a power source using the provided DC12V power supply.
- Ensure TCP/IP communication is properly set up for network connectivity.
- Enrol users by registering their fingerprints, cards (ID or IC), or passwords.
- Configure access control settings such as door magnet operation and exit button functionality.
- Monitor attendance and access records through the device’s interface or connected software.
(FAQ)
- Q: How can I reset the device if needed?
- A: To reset the device, locate the reset button on the device and press it for 10 seconds until the device restarts.
- Q: Can multiple devices be connected to create a network of access control systems?
- A: Yes, multiple devices can be connected via TCP/IP to create a network of access control systems for larger installations.
- Q: What should I do if the device shows an alarm record capacity full?
- A: To free up space for new alarm records, regularly download and archive existing records to external storage or software.
Device Parameter
- Communication: TCP/IP Communication Rate: 10M/100M User Capacity: 3.000
- Record Capacity: 70.000
- Alarm Record Capacity: 20.000
- Exit Button: 1
- Door-Magnet: 1
- Authentication Mode: Fingerprint/Card (ID or IC) / Password
- Reader Interface: 1
- Input Protection : TVS lightning protection,
- PTC surge protection Output Protection: Varistor Protection Working Voltage: DC12V
- Working Current: Non-load<1A
- Size: 122Lx77Wx45H (mm) 4.80Lx3.03Wx1.77H (in.)
Advanced Features
- Automatic Attendance To generate attendance reports automatically
- Alarm Push Safety abnormal reminder, easier to manage..
- E-mail Service Send an e-mail to the manager about alarm information and attendance reports.
- Professional Comprehensive Security Management Access control, alarm and attendance management system.
- Staff Care focuses on employee working situations and help to increase efficiency
- multiple Identification Modes are Used in Combination Fingerprint, and RFID are used
Professional Features
Important Notices
If users do not follow the below items, the system may not work well, and even cause some damages.
- Any connection and operation are prohibited when components or the controller is powered on.
- Please connect the system according to the instructions described in this manual.
- The IP address should not be repeated. If there are two network cards in a PC, please prohibit one.
- Please use the specified power supply.
Product Appearance
Tamper button and Clear Communication Password:
To press the tamper button 5 times to clear the communication password. After
clearing, it will beep.
Product Installation
Wiring Diagram
For advanced features, please use TITAN VSAXESS software.
Disclaimer:
VISIONIS reserve the right to go ahead with any modifications of models or
features or price without forewarning. All the information and specifications
stated in this document are current at the time of publication. Attention: We
are not responsible for the improper installation of this kit. If you are not
handy with electrical equipment you should contact a professional electrician.
You will also need to check with your local Fire authority to see if you need
anything else to comply with local Fire Codes. We are not responsible for any
damage or fees that can occur. If you need technical support you can contact
us at: