BLUETTI 17.0303.0373-00 716Wh Portable Power Station User Manual
- June 4, 2024
- Bluetti
Table of Contents
BLUETTI 17.0303.0373-00 716Wh Portable Power Station
SAFETY INSTRUCTIONS
Please observe the following instructions to ensure safe use:
- DO NOT attempt to replace the internal battery with anything other than the authorized replacement battery by yourself.
- DO NOT operate in wet conditions, let unit dry completely before using.
- Ensure proper ventilation while in use and do not obstruct fan openings on use. Inadequate ventilation may cause damage to the power station.
- DO NOT stack anything on top of the power station in storage or in use, vibration and impact may lead to a poor connection to the hardware inside.
- DO NOT insert foreign objects into outputs or ventilation holes.
- DO NOT place the power station near heat sources like a furnace or ambient heater.
- The power station generates the same potentially lethal AC power as a household wall outlet, please take care and keep children away from it.
General Specs
Output Specs
Common Loads
716Wh×DOD×η÷ (the current load power W) = available time（unit: hrs/times）
Note：
DOD indicates Depth of Discharge, η indicates inverter efficiency, DOD=90% ,
η=90%.
- Charging Port
- LCD Screen
- Wireless Charging Pad
- LED Lamp Button
- LED Lamp
- DC Power Button
- USB-C Port
- USB-A Port
- DC 5521 Output Port
- Cigarette Lighter Port
- AC Power Button
- AC Outlet
Solar Charging
LCD SCREEN GUIDE
- ECO-Mode Icon
- Battery Capacity
- Input Power
- Alert Icon for Low Voltage
- Alert Icon for Temperature Anomaly
- Output Power
- Alert Icon for Overload
- Alert Icon for Short Circuit
ECO Mode:
Turn off the unit while the power of AC output is less than 10W in 4 hours for
power saving. How to operate on power station to turn ON/OFF ECO Mode\ and
change the working frequency:
- To Enter Settings Mode: Turn “AC” mode to the off position. Press the “AC” and “DC” buttons at the same time for 2 seconds to enter “Settings” mode.
- To Change Frequency Setting: Once in “Settings” mode, press the “AC” button to switch the frequency of the AC output ports to either 50 or 60 Hz depending on your location.
- Eco Mode: Once in “Settings” mode, press the “DC” button to turn ON / OFF the ECO mode.
- Exit Settings Mode: Long press the “AC” and “DC” buttons at the same time for 2 seconds to save and exit the settings mode.
What`s In The Box
FREQUENTLY ASKED QUESTIONS
How do I clean for power station?
Dry, non-abrasive clothes to wipe will be perfect. A power station is a
versatile tool for various adventures, simple cleaning would be required from
time to time to keep the unit in a good condition.
How to store my power station?
Please place the power station in a dry and cool place at the recommended
temperature. Do not expose the power station to a humid environment. If you
want to store it for a long time, please charge the battery to 80% every 6
months to extend the battery lifetime. Remind to turn off the unit before
storing.
How do I know whether my device will work with the power station?
Step1:
You need to figure out the amount of power your devices require. Some research
may be taken on an internet search or the user guide of your device shall
suffice.
Step 2:
Check the rated power of a certain port on the power station. For example, if
the AC output port generates 1000W of power and your device requires over
1000W for an extended period of time, the power station will turn itself off.
How to claim the warranty?
Please place your after-sale requirement as the warranty card written to
the platform where you order the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>