Schreder OMNISTAR KIT PRO Powerful Fully Assembled Lighting Solutions Instruction Manual
- June 5, 2024
- Schreder
Table of Contents
OMNISTAR KIT PRO Powerful Fully Assembled Lighting Solutions
Instruction Manual
OMNISTAR KIT PRO Powerful Fully Assembled Lighting Solutions
SAFETY INSTRUCTIONS
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similarly qualified person. Always
switch off the power prior to installation, maintenance or repair activities.
RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from
this product. Do not stare at the luminaire when operating as it may be
harmful to the eyes. The luminaire should be positioned so that prolonged
staring at the luminaire at a distance of fewer than 0.2m is not expected.
This product contains a light source of an energy
efficiency class G or higher.
In the case of PVC insulated mains cable, the installer MUST ensure that the
WHOLE cable is protected against climatic conditions, especially UV rays and
rain, by making sure
that the cable is contained inside the luminaire and pole
Y-connection: In case of damage to the wire, it has to be replaced only
by the manufacturer, distributor or by an expert, to avoid risks.
00-14-732
CAD-0007794 rev J
03-2022
www.schreder.com