Schreder Omnistar LED Light Instruction Manual

June 5, 2024
Schreder

Schreder Omnistar LED Light

Overview

What In The Box

Schreder-Omnistar-LED-Light-fig-2

Description

Schreder-Omnistar-LED-Light-fig-3

Mounting to the vertical or horizontal surface:

  • 4x min M10 – M12, or
  • 2x min M12 – M14, or
  • 4x M8 + 1x M20

INSTALLATION INSTRUCTIONS

Schreder-Omnistar-LED-Light-
fig-4 Schreder-Omnistar-LED-Light-fig-5

OptionSchreder-Omnistar-LED-Light-fig-6Schreder-
Omnistar-LED-Light-fig-7 Schreder-Omnistar-LED-Light-
fig-8

SAFETY INSTRUCTIONS

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person. Always switch off the power prior to installation, maintenance or repair activities.

RISK GROUP 2

CAUTION!
Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of fewer than 0.2m is not expected. This product contains a light source of an energy efficiency class G or higher. In the case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole

Y-connection:
In case of damage to the wire, it has to be replaced only by the manufacturer, distributor, or an expert, to avoid risks.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Schreder User Manuals

Related Manuals