Schreder 00-14-512 Tflex Base Stainless Steel Instruction Manual
- June 1, 2024
- Schreder
Table of Contents
Schreder 00-14-512 Tflex Base Stainless Steel
Product Information
Specifications:
- Weight: 12 kg
- Input Voltage: 120-277V, 220-240V DC, 347-480V 50/60Hz
- Current: 350-1200 mA
- Power Consumption: 75-960W
- IP Rating: 66
- IK Rating: 08
Product Usage Instructions
Installation:
- Connect the optical block first before connecting the mains.
- Depending on the mains cable type (with or without dimming option), use the appropriate cable with the specified diameter.
- Follow the provided instructions for connecting optical blocks and main cables.
Connecting Optical Blocks:
- Ensure no tools are used for connecting optical blocks.
- Use the provided connectors for the specified number of optical blocks.
Safety Instructions:
- Always switch off the power before installation, maintenance, or repair activities.
- Avoid staring at the luminaire when operating to prevent harm to the eyes.
- For PVC insulated mains cable, protect the entire cable against climatic conditions by enclosing it inside the luminaire and pole.
FAQ:
-
Q: Can the light source be replaced by the user?
A: The light source should only be replaced by the manufacturer, service agent, or a qualified person. -
Q: What should be done in case of damage to the wire?
A: In case of wire damage, it should be replaced only by the manufacturer, distributor, or an expert to avoid risks.
OMNIBOX
Features
Dimension
Power
- Cable gland M20
- QPD W 3PE2,5 M25 0,25 BK
- QPD W 4X2,5 M25 0,25 GY B-S
To optical block(s)
- Cable gland M20
- QPD W 3×1,5 M20 0,35 BK B-S
- QPD W 5×1,5 M25 0,25 BK B-S
Caution
Installation
With Omnistar OB – No connector
Connect mains only after the optical block!
With connector
FIX BRACKET FOR SURFACE MOUNT
Features
Dimension
Parts And Hardware
Installation
only for stainless steel
SAFETY INSTRUCTIONS
- The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
- Always switch off the power before installation, maintenance or repair activities.
RISK GROUP 2 – CAUTION!
- Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.2m is not expected.
- This product contains a light source of an energy efficiency class G or higher.
- In the case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole
Y-connection:
In case of damage to the wire, it has to be replaced only by the manufacturer,
distributor or by an expert, to avoid risks.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>