Schreder INDU BAY GEN 4 Industrial Lighting Instruction Manual
- June 1, 2024
- Schreder
Table of Contents
Schreder INDU BAY GEN 4 Industrial Lighting
INSTALLATION INSTRUCTIONS
INDU BAY G4 2 ZhA | INDU BAY G4 4 ZhA | |
---|---|---|
øD | 320mm / 12.59’’ | 400mm / 15.75’’ |
H | 118mm / 4.64’’ | 118mm / 4.64’’ |
(Bracket) | 2.2kg / 4.85 lbs | 3.2kg / 7.05 lbs |
Maximum number of luminaires per MCB
Input voltage: 120-277V~
RECOMMENDATIONS
The electrical connection outside of the luminaire must be placed in an
IP66 protected area.
Sensor installation
Connect to the power supply in accordance with national regulation. Terminal
block not included. Installation must be performed by a qualified person. For
indoor and outdoor use. The product must be grounded. Make sure the
construction is strong enough to support the product.
The light source fitted in this luminaire shall only be replaced by a Schréder
employee or agent or a similar qualified person.
The external flexible cable or cord of this luminaire cannot be replaced. If
the cord is damaged, the luminaire should be destroyed.
For use in environments where an accumulation of conductive dust on the
luminaire may be expected.