Schreder FLEXIA BRASO Urban and Residential Streets Light Instruction Manual
- May 15, 2024
- Schreder
Table of Contents
Schreder FLEXIA BRASO Urban and Residential Streets Light
All the tightening torque values are given for assemblies without the addition of grease-decreasing friction.
TOOLS REQUIRED
Installation
Maintenance (CR-KIT EU)
Reassembling (CR-KIT EU)
Maintenance (CR-KIT CSA/UL)
Reassembling (CR-KIT CSA/UL)
Connection – No main cable supply
Line and neutral MUST be respected
SAFETY INSTRUCTIONS
The light source contained in this luminaire shall only be replaced by the
manufacturer his service agent or a similar qualified person. Always switch
off the power before installation, maintenance or repair activities.
RISK GROUP 2 – CAUTION!
Hazardous optical radiation may be emitted from this product. Do not stare at
the luminaire when operating as it may be harmful to the eyes. The luminaire
should be positioned so that prolonged staring at the luminaire at a distance
of less than 0.94m is not expected. This product contains a light source of
an energy efficiency class G or higher see the table on the first page.
In the case of PVC
insulated mains cable, the installer MUST ensure that the WHOLE cable is
protected against climatic conditions, especially UV rays and rain, by making
sure that the cable is contained inside the luminaire and pole. Y-connection:
In case of damage to the wire, it has to be replaced only by the manufacturer,
distributor or by an expert, to avoid risks.
03-63-379 | rev B | 10-2023 www.schreder.com