Polibi WF283525 5 Pieces Gray Solid Wood Queen Bedroom Sets Instruction Manual

Polibi WF283525 5 Pieces Gray Solid Wood Queen Bedroom Sets

SAFETY WARNINGS

1. This bed is designed for use Queen Mattress 2050 mm Long and 1530 mm Wide and the total thickness is not exceeding 100mm.
2. The dimensions for length and width must be stated numerically and may additionally be stated in conventional terms, for example, twin size, twin extra long, and the like.
3. The maximum thickness of the mattress shall be stated
4. Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton. Do not remove the warning label from the bed.
5. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.
6. The surface of the mattress must be at least 5 in. (127 mm) below the upper edge of the guardrails.
7. Do not allow children under 6 years of age to use the upper bunk.
8. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage and that all connectors are tight.
9. Do not allow horseplay on or under the bed and prohibit jumping on the bed
10. Always use the ladder for entering and leaving the upper bunk.
11. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
12. The use of a night light may provide added safety precautions for a child using the upper bunk.
13. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.
14. The use of water or sleep flotation mattresses is prohibited.
15. STRANGULATION HAZARD- Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
16. Keep these instructions for future reference.

ASSEMBLY INSTRUCTION

Part List(wF283525)-Hardware List

Hardware List-BED

STEP 1: ASSEMBLY HEADBOARD

1. Using Dowel 1 locate B2,B8 Wood Bar with B4 Wood Bar and Panels B3(x2)
2. Using HW #2,#7 Connect A1,A2 Legs with B2,B8,85 Wood Bar
3. Using HW #3 Connect B1 Wood Bar with Frame(completed on step 1.2)
4. Look at detail view for more detail

STEP 1.1

STEP 1.2

STEP 1.3

STEP2: AsSEMBLY FOOTBOARD

1. Using Dowel 1 locate B2,88 Wood Bar with B7 Wood Bar and Panels B6(x2)
2. Using HW #2,#7 Connect A3,A4 Legs with B2,B8 Wood Bar
3. Using HW *3 Connect B1 Wood Bar with Frame(completed on step 2.2)
4. Look at the detail view for more detail

STEP 2.1

STEP 2.2

STEP 2.3

STEP 3: Following below illustration

• Using hardware #4,#5 and dowel #1 follow the detail view to Assembly Headboard (Completed on step 1.3) with Footboard (completed on step 2.3)by Side Rail C(2)
• Look at detail view for more detail

STEP 4: Following below illustration

• Using hardware #8 to Assembly Slats D1(x2) With Support Slats D3(x2) and Center Legs D4(x4)
• Look at the detail view for more detail

STEP 5

STEP 6: Following below illustration

• Screw 6 slats D2 with Side Rails Cx2) by using hardware #3.

ITEM#: WF288862 AAW-AAG DRESSER

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. identify and count all parts and compare them with the parts list below.

ASSEMBLY INSTRUCTION

1. Remove hardware from the box and sort by size.
2. Please check to see that all hardware and parts are the present prior start of assembly.
3. Please follow the attached instructions in the same sequence as numbered to assure fast and easy assembly.

WARNING

1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and is not intended for commercial establishments.
3. Two persons are required for assembly.
4. Approximate assembly time: 1/2 hours.
5. Component parts and fittings contained in the boX. Please sort out all parts before you begin to assemble ti item. This is to make sure you always use the correct part.
6. It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture can cause serious injuries and death. This product has not been fitted with an anchor strap. To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided and appropriate fixings.

LIST OF HARDWARE

Step 1

Step 2

Step 3

ITEM #: WF 288864 AAW-AAG Two Drawer Nightstand

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. identify and count all parts and compare with the parts list below.

ASSEMBLY INSTRUCTION

1. Remove hardware from the box and sort by size.
2. Please check to see that all hardware and parts are the present prior start of assembly.
3. Please follow the attached instructions in the same sequence as numbered to assure fast and easy assembly.

WARNING

1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and is not intended for commercial establishments.
3. Two persons are required for assembly.
4. Approximate assembly time: 1/2 hours.
5. Component parts and fittings are contained in the box. Please sot out all parts before you begin to assemble the item. This is to make sure you always use the correct part.
6. It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture can cause serious injuries and death. This product has not been fitted with an anchor strap. To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided and appropriate fixings.

ITEM #: WF 288863 AAW-AAG CHEST

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all parts and compare them with the parts list below.

ASSEMBLY INSTRUCTION:

1. Remove hardware from the box and sort by size.
2. Please check to see that all hardware and parts are the present prior start of assembly.
3. Please follow the attached instructions in the same sequence as numbered to assure fast and easy assembly.

WARNING

1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
3. Two persons are required for assembly.
4. Approximate assembly time: 1/2 hours.
5. Component parts and fittings contained in the box. Please sort out all parts before you begin to assemble the item. This is to make sure you always use the correct part.
6. It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture can cause serious injuries and death. This product has not been fitted with an anchor strap. To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided and appropriate fixings.

LIST OF HARDWARE

Step 1

Step 2

Step 3

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>