ACHAT 9300000101674720 Airwrap Styler User Manual
- June 3, 2024
- ACHAT
Table of Contents
ACHAT 9300000101674720 Airwrap Styler
SAFETY PRECAUTIONS
- BEFORE PLUGGING IN, CHECK THAT THE VOLTAGE INDICATED ON THE LABEL MATCHES THE VOLTAGE IN YOUR HOME.
- IF THE CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, MECHANIC OR EQUALLY QUALIFIED PERSON TO AVOID DANGER.
- IF THE HAIR DRYER IS USED IN A BATHROOM, UNPLUG IT AFTER USE. THE PROXIMITY OF WATER POSES A HAZARD EVEN IF THE HAIR DRYER IS TURNED OFF.
- FOR ADDED SAFETY, IT IS ADVISABLE TO INSTALL AN EARTH LEAKAGE CIRCUIT BREAKER WITH A RATED RESIDUAL CURRENT OF NO MORE THAN 30 MA IN THE ELECTRICAL CIRCUIT SUPPLYING THE BATHROOM. ASK AN INSTALLER FOR ADVICE.
- WARNING: DO NOT USE THIS APPLIANCE NEAR A BATHTUB, SHOWER, SINK, OR OTHER OBJECT CONTAINING WATER.
- DO NOT USE THE HAIR DRYER FOR ANY PURPOSE OTHER THAN THAT DESCRIBED IN THESE INSTRUCTIONS.
- THIS APPLIANCE MAY BE USED BY CHILDREN 8 YEARS OF AGE AND OLDER. PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES AND LACK OF EXPERIENCE AND KNOWLEDGE MAY ALSO USE THE APPLIANCE. PROVIDED THAT THEY ARE SUPERVISED OR INSTRUCTED IN THE SAFE USE OF THE APPLIANCE AND THAT THEY UNDERSTAND THE RISKS INVOLVED. CHILDREN SHOULD NOT PLAY WITH THE APPLIANCE. CLEANING AND MAINTENANCE SHOULD NOT BE PERFORMED BY UNSUPERVISED CHILDREN.
- DO NOT USE OUTDOORS.
- ALWAYS UNPLUG THE HAIR DRYER WHEN NOT IN USE AND BEFORE CLEANING.
- TO AVOID RISK OF ELECTRIC SHOCK, DO NOT IMMERSE THE UNIT IN WATER OR OTHER LIQUID.
- DO NOT USE AEROSOL PRODUCTS WHILE THE HAIR DRYER IS IN OPERATION.
- DO NOT LEAVE THE HAIR DRYER ON WHEN NOT IN USE.
- DO NOT USE ANY ACCESSORIES OTHER THAN THOSE PROVIDED.
- THE AIR INLET AND OUTLET OPENINGS SHOULD NEVER BE BLOCKED TO PREVENT THEM FROM BECOMING TOO HOT.
- IF THE AIRFLOW IS ACCIDENTALLY BLOCKED DURING USE, THE BUILT-IN THERMAL SAFETY DEVICE WILL AUTOMATICALLY TURN THE UNIT OFF. THE HAIR DRYER WILL AUTOMATICALLY TURN ON AGAIN AFTER IT COOLS DOWN FOR A FEW MINUTES.
- KEEP YOUR HAIR AWAY FROM THE INLET OPENING TO PREVENT IT FROM BEING DRAWN IN.
- STORE THE UNIT IN A COOL, DRY PLACE. DO NOT USE WHEN YOUR HANDS ARE WET.
SETTINGS TEMPERATURE LEVEL
- ON/OFF
- MODERATE TEMPERATURE FOR GENTLE DRYING AND STYLING 2: HIGH TEMPERATURE FOR FAST DRYING AND STYLING
- HIGHER TEMPERATURE FOR FASTER DRYING AND STYLING
PRODUCT CLEANING
- THE APPLIANCE CAN BE CLEANED WITH A DRY CLOTH.
- THE ATTACHMENTS CAN BE CLEANED WITH A MOIST CLOTH OR RINSED UNDER A RUNNING TAP. REMOVE THE ATTACHMENTS FROM THE APPLIANCE BEFORE CLEANING. MAKE SURE THE ATTACHMENTS ARE DRY BEFORE USING OR STORING THEM.
- NEVER RINSE THE APPLIANCE WITH WATER
WARANTY INFORMATION
THE MANUFACTURER PROVIDES WARRANTY IN ACCORDANCE WITH THE LEGISLATION
OF THE CUSTOMER’S OWN COUNTRY OF RESIDENCE, WITH 1 YEAR, STARTING FROM THE
DATE ON WHICH THE APPLIANCE IS SOLD. THE WARRANTY ONLY COVERS DEFECTS IN
MATERIAL OR WORKMANSHIP. THE REPAIRS UNDER WARRANTY MAY ONLY BE CARRIED OUT BY
AN AUTHORIZED SERVICE CENTRE. WHEN MAKING A CLAIM UNDER THE WARRANTY, THE
ORIGINAL BILL OF PURCHASE (WITH PURCHASE DATE) MUST BE SUBMITTED. THE WARRANTY
WILL NOT APPLY IN CASES OF: – NORMAL WEAR AND TEAR – INCORRECT USE, E.G.
OVERLOADING OF THE APPLIANCE, USE OF NON-APPROVED ACCESSORIES – USE OF FORCE,
DAMAGE CAUSED BY EXTERNAL INFLUENCES – DAMAGE CAUSED BY NON-OBSERVANCE OF THE
USER MANUAL, E.G. CONNECTION TO AN UNSUITABLE MAINS SUPPLY OR NON-COMPLIANCE
WITH THE INSTALLATION INSTRUCTIONS – PARTIALLY OR COMPLETELY DISMANTLED
APPLIANCE
STORAGE SAFETY
WHEN NOT IN USE “UNPLUG IT.” ALLOW THE APPLIANCE TO COOL AND STORE IT IN A DRY LOCATION. NEVER WRAP THE CORD AROUND THE APPLIANCE SINCE THIS WILL CAUSE THE CORD TO WEAR PREMATURELY AND BREAK. IF THE SUPPLY CORD OF THIS APPLIANCE BECOMES DAMAGED THE APPLIANCE MUST BE REPLACED BY RETURNING TO THE RETAILER FROM WHICH THE PRODUCT WAS PURCHASED OR A SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
TECHNICAL DATA
- POWER SUPPLY: EAC110 V -60 HZ AC220 -240V – 50/ 60 HZ
- POWER: 1000 W