Schreder INDU BAY GEN4 Industrial Lighting Installation Guide
- June 1, 2024
- Schreder
Table of Contents
Schreder INDU BAY GEN4 Industrial Lighting
INSTALLATION INSTRUCTIONS
|
---|---
|
|
INDU BAY G4 1/2 D
|
INDU BAY G4 3/4 D
---|---|---
øD
|
320mm / 12.59’’
|
400mm / 15.75’’
H
|
135mm / 5.31’’
|
137mm / 5.39’’
(Bracket)
|
2.6kg / 5.73 lbs
|
3.9kg / 8.59 lbs
THD<20% without dimming the luminaire In-rush current: Cold start max. 103A (twidth=300μs) @277~
Maximum number of luminaires per MCB
Input voltage: 120-277V~
Product name and size | Dimming type | MCB B type |
---|---|---|
B10 | B13 | B16 |
INDU BAY GEN 41 | Programmable programs | 5 |
INDU BAY GEN 42 | Programmable programs | 5 |
INDU BAY GEN 43 | Programmable programs | 6 |
INDU BAY GEN 44 | Programmable programs | 2 |
Product name and size | Dimming type | MCB C type |
C10 | C13 | C16 |
INDU BAY GEN4 1 | Programmable programs | 8 |
INDU BAY GEN4 2 | Programmable programs | 8 |
INDU BAY GEN4 3 | Programmable programs | 9 |
INDU BAY GEN4 4 | Programmable programs | 4 |
RECOMMENDATIONS
The electrical connection outside of the luminaire must be placed in an IP66 protected area.
Suspension chain
U-bracket Pendant
cable dimensions: ø5mm, L=150mm
DALI (3 core)
DIM+ → Purple
DIM- → Grey
Vaux/24V+ → Black/White
MAINS – min. 3×1.0mm2
Warning:
For models with LED driver EUM-75S105BG:
Reinforced insulation provided between input and and output circuit.
Reinforced insulation provided between input circuit and dimming circuit.
Basic insulation provided between output circuit and dimming circuit.
For other ‘EUM’ LED driver:
Reinforced insulation provided between input/output circuit and dimming
circuit.
Reinforced insulation provided between input and and output circuit.
Connect to the power supply in accordance with national regulation. Terminal block not included. Installation must be performed by a qualified person. For indoor and outdoor use.
The product must be grounded. Make sure the construction is strong enough to support the product. The light source fitted in this luminaire shall only be replaced by a Schreder employee or agent or a similar qualified person.
The external flexible cable or cord of this luminaire cannot be rep-laced. If the cord is damaged, the luminaire should be destroyed.
For use in environments where an accumulation of conductive dust on the luminaire may be expected.
Symbol for luminaires with limited surface temperatures.