JULA 013103 BLUE WEAR Boston Instruction Manual

: June 5, 2024
: JULA

Table of Contents

SAFETY INSTRUCTIONS
TECHNICAL DATA
MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

013068,013069,013087-013089,013098,013099,013101,013103

SAFETY SHOES
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com

EU DECLARATION OF CONFORMITY
ltem number
-013068, -013069, 013087, -013189, 013098,- 013099, 0130101-013103
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

This declaration of conformity is issued under the sole responsibility of the manufacturer,
SAFETY SHOE
BOSTON S1 HRO SRA
Size 39-47
Conforms to the following directives, regulations, and standards

Directive/Regulation	Harmonized standard
PPE(EU)2016/425	EN ISO 20345:2011

The PPE is identical to the PPE which is subject of EU type-examination certificate No:
LECF100381003
Name and address of the notified body Involved:
ITS Testing Services (UK) Ltd issued the certificate) Centre Court, Meridian Business Park, Leicester, LE19 1WD, United Kingdom NB 0362
Name and address of the notified body involved: Namn och adress hos involverat kontrollorgan: Nnavn og adresse tit det aktuelle meldte organ(: Nazwa i adres organu kontrolnego: Name and Anschrrft der beteiligten benannten Stelle: Ilmoltetun laitoksen nfml Ja osoite: Naam en adres van de betrokken aangemelde instantie:
Intertek Italia S.p.A. (new NB after transfer of ownership) Via Guido Miglioli 2/A, 20063 Cernusco sul Naviglio – Milano (MI), Italy NB 2575

The PPE is identical to the PPE which is subject of EU type examination certificate No:| LECF100381003
---|---
Name and address of the notified body Involved:| ITS Testing Services (UK) Ltd (issued the certificate) Centre Court, Meridian Business Park, Leicester, LE19 1WD, United Kingdom NB 0362
Name and address of the notified body involved:| Intertek Italia S.p.A. (new NB after transfer of ownership) Via Guido Miglioli 2/A, 20063 Cernusco sul Naviglio – Milano (MI), Italy NB 2575

This product was CE marked in year.
Skara 2021-04-21

Maria Sihvonen Grahn
BUSINESS AREA MANAGER

SAFETY INSTRUCTIONS

Choose shoes that provide the required protection and which are suitable for their application.
If the conditions are not known, the purchaser and seller should discuss the circumstances to ensure the best choice. Safety shoes are designed to inimise the risk of personal injury for the wearer during use.
They are intended to be used in combination with a safe working environment, and cannot fully prevent personal injury in the event of an accident that results in the limit values according to EN ISO 20345 2011 being exceeded.
The shoes protect the wearer’s toes against injury as a result of falling objects and crushing injuries with the level of protection described below.
If the footwear is damaged it will no longer provide the specified protection. Damaged footwear must be replaced immediately to ensure that the wearer is fully protected. ensure that the wearer is fully protected.
Only use approved accessories. Non approved accessories may alter properties and the protective function. Please contact customer services for further details.
Anti-static footwear should be used where it is necessary to minimize any electrostatic build-up by dissipating electrostatic charges, thus avoiding the risk of spark ignition of, for example, flammable substances and vapours, and if the risk of electric shock from electrical devices or components has not been completely eliminated. It should be noted, however, that anti-static footwear cannot guarantee an adequate protection against electric shock as
it introduces only resistance between foot and floor. If the risk of electric shock has not been completely eliminated, additional preventative measures are essential. Such measures, as well as the additional tests set out below, should be a routine part of the accident prevention program of the workplace.
Experience has shown that the discharge path through an anti-static product should normally have an electrical resistance not exceeding 7,000 MO at any given time throughout its useful life. A value of 100 kO is specified as the lowest limit of resistance of a product when new, in order to ensure some limited protection against electric shock or ignition in the event of any electrical apparatus becoming defective when operating at voltages up to 250 V. However, users should be aware that in certain circumstances the footwear may not give adequate protection. Additional measures to protect the user
should be taken at all times.
The electrical resistance of this type of footwear can be changed significantly by flexing, contamination or moisture. The footwear will not perform as intended if worn in damp or wet conditions. It is, therefore, necessary to ensure that the product is capable of fulfilling its intended function of issipating electrostatic charges and providing some protection against electric shock during the whole of its life The user is recommended to establish a
routine test for electrical resistance and to use it at regular and frequent intervals. Class, I footwear can absorb damp if used
for longer periods and can become conductive in damp or wet conditions.
If the footwear is worn in conditions where the sole material becomes contaminated, the wearer must always check the electrical properties of the
footwear before entering a hazard area.
Where anti-static footwear is in use, the resistance of the flooring should be such that it does not invalidate the protection provided by the footwear.
No insulating objects, apart from normal socks, may be used between the footwear’s insole and the wearer’s foot If any inlays are used between the insole and the foot, the electrical properties of the combination of footwear and inlay must be checked. The footwear comes with a detachable insole. Note that testing is carried out with the insole in place. Only wear footwear with the insole in. The insole may only be replaced with an insole of the same type.

SYMBOLS

| Read the instructions.
---|---
| Conforms with the requirements in the relevant EU directives/ regulations.

REGULATIONS AND STANDARDS

(EU) 2016/425 – Regulation for personal protective equipment (PPE)
EN ISO 20345 2011 — Personal Protective
Equipment, safety shoes.

TECHNICAL DATA

The notified body ITS UK (NB 0362) performed the type examination and issued the type examination certificate No.(see the declaration of conformity for the certification number) The Notified body INTERTEK ITALIA S.p.A (NB 2575), now owns this document, and it is valid under this notified body.
Intertek Italia S.p.A. Via Guido Miglioli 2/A, 20063 Cernusco sul Naviglio, Milano (MI), Italy Notify body 2575.

Footwear size	39-47
Marking	S1 HRO SRA
European standard	EN ISO 20345 2011

MARKING

Safety class	S1
Supplementary marking	HRO, SRA

DESCRIPTION

The toe caps in the safety shoes protect the user’s feet from falling objects and crushing injuries in dangerous working environments.

The absorbable impact energy is 200J.
The absorbable static load is 15,000 N.

MARKING
Safety class

Type l is a footwear made of leather and other materials, although not footwear made entirely of rubber or entirely of polymer.
Type ll is footwear made entirely of rubber (fully vulcanized) or entirely of polymer (fully moulded)

Marking	Significance
P	Penetration resistance (1,100 N).

NOTE:
There is still a risk of slipping in certain environments.

MAINTENANCE

Shoes are subjected to considerable stress and require meticulous care to last for a long time. Below are various pieces of basic advice regarding how to
look after and extend the life of your work shoes:

Maintain your shoes regularly, check the soles, remove stones, etc.
Clean your shoes with a damp cloth, or alternatively brush off mud, sand, dust and other dirt with a soft shoe-brush are each use.
If the shoes become wet, allow them to dry at room temperature -never in a drying cabinet, on a radiator or similar.
If the shoelaces become worn, replace them immediately to ensure a good fit.
If the shoes become damaged, replace them immediately. Damaged shoes do not provide the specified level of protection and must be discarded.

NOTE: Do not use strong detergents!

STORAGE
The packaging provided with the footwear at the point of sale is designed to ensure that the ootwear is delivered to the customer in the ame condition as it left the manufacturer. The packaging can also be used to store the footwear when not in use. Do not place any heavy objects on the packaging when the footwear is inside this could cause the packaging to collapse and damage the footwear.

The footwear must be stored at a normal temperature and humidity. The estimated lifetime is as follows:
– 10 years from date of manufacture for footwear with a rubber sole and leather upper.
– 3 years from the date of manufacture for shoes with polyurethane.
How long the shoes will actually last depends on environmental factors, contamination and wear.