DONGGUAN G Series Bluetooth Speaker User Manual

DONGGUAN G Series Bluetooth Speaker

Specifications

• Model: ABC123
• Color: Black
• Material: Stainless Steel
• Power: 1200W
• Capacity: 1.5 liters

Product Information

The ABC123 Electric Kettle is a stylish and durable kettle made of high- quality stainless steel. With a power output of 1200W, it quickly boils water for your favorite beverages. The kettle has a generous capacity of 1.5 liters, making it suitable for both personal and small group use. Its sleek black color adds a touch of elegance to any kitchen.

Product Usage Instructions

Initial Setup:

Before using the electric kettle for the first time, make sure to remove all packaging materials and labels. Fill the kettle with water up to the maximum capacity level and boil it once without any contents. Discard this water and rinse the kettle thoroughly.

Boiling Water:

Fill the kettle with the desired amount of water, making sure not to exceed the maximum capacity level indicated. Place the kettle on its base and plug it into a power outlet. Press the power button to start the boiling process.

Pouring and Serving:

Once the water has boiled, carefully pour it into your cup or teapot. The kettle features a convenient spout for easy pouring without spills. Serve your hot beverage and enjoy!

Frequently Asked Questions

Q: Can I heat other liquids besides water in the kettle?

A: It is recommended to only boil water in the kettle to avoid damaging the appliance.

Q: How do I clean the kettle?

A: To clean the kettle, unplug it and allow it to cool down. Wipe the exterior with a damp cloth and use a mild detergent to clean the interior. Rinse thoroughly and wipe dry before next use.

Respected users:

thank you for purchasing our production of Bluetooth speakers, thank you for your support to us! Please read this manual carefully before use. We are not responsible for any personal injury or product damage caused by improper use.

Schematic diagram of control panel

How to charge

Bluetooth connection

Specification

• Built-in Battery voltage: 3.7V
• Battery Capacity: 1200mAh
• Charging voltage: 5V 500mA
• Speaker driver: 52mm 405W
• Frequency response: 60Hz-18KHz
• S/N Ratio: ≥65dB

Speaker with clock
You buy and sell our products with a clock function, if the clock display and your time zone, the time is not accurate; please take out the clock to adjust the exact time in your time zone. And then put it back where it belongs.
(Note: This Bluetooth Speaker clock function is for the clock version only)

Points to note

In order to prevent any fire or electrical danger, please don’t disassemble and replace the parts by yourself. If the product is damaged, please contact the professional repairman or the appointed maintenance center.

1. Do not leave the product in the rain, water or damp place, keep the product dry;
2. Do Not pour liquids on or near the product
3. Do not place the product near a fire source, such as a candle or other open flame
4. Place the product on a level surface
5. In the case of this product is not used for a long time, in order to extend the battery life, please charge this product once within 30 days.

FCC warning

1. This device should be installed and operated with minimum distance 0cm between the radiator&your body.
2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
3. This device may not cause harmful interference, and
4. This device must accept any interference received, including interference that may cause undesired operation.
5. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
6. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
7. Reorient or relocate the receiving antenna.
8. Increase the separation between the equipment and receiver.
9. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
10. Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>