tp-link Media Converter Instructions
- July 17, 2024
- tp-link
Table of Contents
tp-link Media Converter
Product Specifications
- Interface: FX, TX
- Supported Cables: Fiber optic cable, Twisted-pair cable
Product Usage Instructions:
Scenario 1: Connect Devices with and without Optical
Interfaces
For connecting an Ethernet device with optical interfaces to one without:
- Connect the FX interface of the Ethernet device with the Fiber cable to the Media Converter’s FX interface.
- Connect the TX interface of the Media Converter to the TX interface of the Ethernet device without optical interfaces using a Twisted-pair cable.
Frequently Asked Questions (FAQ):
Q: How do I know which cable to use for connecting devices?
A: If one or both devices have optical interfaces, use Fiber optic cable. If
neither device has optical interfaces, use Twisted-pair cable for connections.
Installation Guide
Media Converter
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Adapter shall be installed near the equipment and shall be easily accessible.
- Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of device. Please use this product with care and operate at your own risk.
TP-Link Limited Product Warranty
For TP-Link Branded Products Only.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH
ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the
original packaging against defects in materials and workmanship when used
normally in according with TP-Link’ s guidelines for some period which depends
on the local service from the date of original retail purchase by the end-user
purchaser
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-
link.com/en/support/ce/
For technical support, the user guide and other information, please visit https://www.tp-link.com/support/ or simply scan the QR code.