JULA 016481 Heater Fan Instruction Manual

: June 3, 2024
: JULA

Table of Contents

JULA 016481 Heater Fan
SAFETY INSTRUCTIONS
TECHNICAL DATA
DESCRIPTION
USE
- ADJUSTING THE THERMOSTAT
- OVERHEATING PROTECTION
MAINTENANCE
- STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JULA 016481 Heater Fan

SAFETY INSTRUCTIONS

Keep children less than 3 years old under supervision when they are near the product. The product can be switched on/off by children from 3 to 8 years old only if it is mounted in the correct position to use, and if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved. Do not allow children from 3 to 8 years old to connect, use, clean or maintain the product.
This product can be used by children from 8 years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge, if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved. Keep children under supervision to make sure they do not play with the product. Do not allow children to clean or maintain the product without supervision. Keep children less than 3 years old under supervision when they are near the product.
The product is only intended for household use.
Pull out the plug if the product is not going to be used for some time.
Do not run the power cord in front of the product.
The product must only be connected to a correctly installed and earthed power point. Check that the mains voltage corresponds to the rated voltage on the type plate.
Make sure to plug the plug firmly in the power point. Do not touch the power cord or the plug with wet hands.
Put the switch in the OFF position and pull out the plug when the product is not in use.
Do not route the power cord under carpets etc. Place the power cord so that there is no risk of treading on it, or tripping over it.
Do not expose children to the flow of air from the product for long periods.
Only use the product in a well-ventilated area.
Do not place the product near walls or corners, where incoming or outgoing air can be blocked.
Do not put the product near curtains, or other flammable materials – fire risk.
Do not expose the product to vibrations, knocks or blows when in use.
The product is not intended to be controlled with an external timer or a separate remote control that can make the product start automatically.
Do not use longer than necessary extension cords. Always unfold the complete extension cord.
Do not connect other appliances to the same power outlet the product is using.
Never leave the product unattended when plugged in. Keep children and pets at a safe distance.
Never put the product in a vehicle that is moving or on any other surface where there is a risk of it tipping over.
Place the product where the air flow cannot be blocked by furniture or curtains, etc.
Do not use the product in explosive environments, for example in the vicinity of flammable liquids, gas or dust. Do not place the product near a naked flame or other source of heat.
Do not attempt to dismantle or repair the product. Repairs should be carried out by qualified personnel or an authorised service centre.
A damaged cord or plug must be replaced by an authorised service centre or qualified person to ensure safe use.
Switch off the product immediately and pull out the plug in the event of any abnormal noise, smell, smoke or other sign of a problem.

WARNING!

Some parts of the product get very hot
- risk of burn injuries. Keep the product under careful supervision when it is used by, or near children or persons with functional disorders.
Do not put any foreign objects on the product.
Never poke your fingers or any other objects into the inlet or outlet openings.
Do not use the product near a bath, shower or swimming pool.
Do not cover the product, this can result in overheating.

TECHNICAL DATA

Rated voltage 230 V ~ 50 Hz
Output 1000/2000 W
Safety class II
Protection rating IP20
Size 22 x 27 x 13 cm
Weight 1 kg

DESCRIPTION

Thermostat
Mains indicator
Handle
Function selector

USE

When the heater fan is used for the first time, or when it has not been used for some time, it is normal for it to smell a little and emit fumes. This will soon stop.
The heater fan has a tilt switch.
To activate the fan it must be placed on a level surface.

Turn the thermostat clockwise to MAX.
To use in the summer (ventilation only), turn the function selector to the position .
For heating at half power, turn the function selector to position I (1000 W).
For heating at full power, turn the function selector to position II (2000 W).
To switch off the heater fan, turn the function selector to position 0.

ADJUSTING THE THERMOSTAT

When the room has reached the required temperature, turn the thermostat slowly anticlockwise until the heater fan switches off and stop in this position. The thermostat will then maintain this temperature in the room.

OVERHEATING PROTECTION

The heater fan has a safety switch that switches off the fan in the event of overheating, for example if the air inlet/outlet is blocked, or
if the motor is running too slowly or not at all. To reset the heater fan – pull out the plug from the power point and wait a few minutes. Eliminate the reason for the overheating and plug the plug back in the power point. If this does not solve the problem, take the heater fan to an authorized service centre for inspection.

MAINTENANCE

NOTE: Switch off the product, pull out the plug, and wait until the product has completely cooled before cleaning and/or maintenance.

Wipe off any dust from the surface of the product with a soft cloth. When necessary clean with a cloth moistened with a mild detergent and then dry with a soft cloth.
Do not use petrol, solvent or strong detergent. This can damage or discolor the product.

STORAGE

Pull out the plug and cover over the product to protect it from dust if it is not going to be used for some time.
Store the product in a cool, dry and well ventilated place.