WPL ELTRON A-07 Premium Air Source Heat Pumps Instructions
- September 18, 2024
- WPL
Table of Contents
WPL ELTRON A-07 Premium Air Source Heat Pumps
Specifications
- Model: WPL 25 ACS, WPL A-07, HPA 08 CS
- Minimum Clearances: Australian standards apply
- Recommended Clearances:
- Front: 1000mm
- Sides: 500mm
- Rear : 300mm
- Above: 500mm
Product Usage Instructions
Adequate clearances are crucial for optimal performance and safety. Follow the guidelines below for proper usage:
- Installation:
- Ensure the product is installed with the recommended clearances as mentioned above to prevent short-cycling and maintain efficiency.
- Ventilation:
- Provide sufficient fresh air supply to the unit to avoid any issues related to short-cycling. Proper ventilation is essential for the product’s functionality.
- Maintenance:
- Regularly clean and inspect the unit to ensure it operates efficiently. Any obstructions in the clearances should be removed promptly.
Australian minimum clearances
Due to Australia‘s climate conditions, the clearance required for WPL 25
ACS, WPL A-07 and HPA 08 CS may be less than the manual specifies. However,
sufficient fresh air supply is essential to prevent the airstream from short-
cycling. Please follow theguidelines in the graphic. Reducing the stated
distances can compromise efficiency
USING INSTRUCTION
Frequently Asked Questions
- Q: Can I reduce the clearances below the recommended levels?
- A: Due to Australia’s climate conditions, the clearances specified are essential for optimal performance. Reducing the clearances can compromise efficiency and lead to potential issues.
- Q: Why is fresh air supply important for the product?
- A: Fresh air supply is crucial to prevent short-cycling and ensure proper functioning of the unit. Inadequate ventilation can impact the performance of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>