JULA 422054 Garden Lantern Lamp Post Instruction Manual
- June 4, 2024
- JULA
Table of Contents
JULA 422054 Garden Lantern Lamp Post
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
- Be sure to connect all mains leads, including the earth lead, correctly. Contact an electrician or your dealer if you are unsure about how to carry out the installation.
- Do not use the lamp post if the power cord and/or plug are damaged in any way. For safety reasons, the power cord must only be replaced or repaired by an authorised service centre. Consult your dealer.
TECHNICAL DATA
- Mains voltage 220 – 240 V/50 Hz (110 V/60 Hz)
- Protection rating IP44
- Rated output 100 W
- Bulb socket E27 (VDE or UL)
- Safety class I
INSTALLATION
Features and uses
- Rugged and durable lamp housing in aluminum alloy
- Electrostatic coating and thermostatic tempering
- Attractive design and corrosion resistant
- Night lighting for car parks, lawns, paths, etc.
- Unpack all the parts and inspect them for any shipping damage. Contact your dealer if any part is damaged or missing.
- Do not connect the lamp post to the mains until the installation is completed.
- Connect the power cord to the terminal.
- Fit the lamp on the post using the accompanying screws.
- Remove the nuts and open the upper lamp cover.
- Remove the protective glass cover and screw a light bulb into the lamp holder. Do not exceed the specified rated output.
- Put the protective glass cover and the upper cover back in place.
- Be sure to connect the earth lead correctly.
MAINTENANCE
Replacing the bulb
The bulb gets very hot. Do not touch the bulb with your bare hands when it is
on or before it has cooled down.
- Disconnect from the mains power supply.
- Loosen the upper cover and glass cover.
- Carefully unscrew the old light bulb.
- Carefully screw in the new light bulb.
- Put the protective glass cover and the upper cover back in place before connecting the lamp post to the mains
References
Read User Manual Online (PDF format)
Loading......