JULA 021124 Charger Instruction Manual
- June 3, 2024
- JULA
Table of Contents
JULA 021124 Charger
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
OVERVIEW
SAFETY INSTRUCTIONS
- For indoor use only.
- Check that the nominal data for the connected appliance corresponds to the technical data for the product. The nominal data for connected appliances must not exceed the technical data for the product.
- Do not connect two or more timers together.
- Always check that the plug on the connected power cord is fully inserted into the charger socket.
- If the charger needs cleaning, unplug it from the mains and wipe it with a dry cloth.
- Do not immerse the charger in water or any other liquid.
- This product is not suitable for use in places where children can be present.
SYMBOLS
| Read the instructions.
---|---
| Class II
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Rated voltage | 230 V ~ 50 Hz |
|---|---|
| Ambient temperature | 0-35°C |
DESCRIPTION
Charger with two USB ports and countdown timer with five modes.
Parts
- Status light Indicates constant switched on mode, or countdown 6, 4, 2 or 1 hour.
- USB 1: Voltage supply 5.0 VDC, count down can be set.
- USB 2: Voltage supply 5.0 VDC, always on.
- Settings button: Press to switch between the modes ON-6H-4H-2H-1H-ON for USB 1.
USE
-
Plug the charger into a power point. The status light ON goes on and USB 1 and USB 2 have a constant output voltage of 5.0 VDC.
NOTE:
The maximum permitted load is 3.1 A. -
Press the settings button to set the countdown time for USB 1. The setting switches between the modes ON-6H-4H-2H-1H-ON each time the button is pressed.
-
When the set time has counted down USB 1 is without voltage and the status light goes off.
-
The next time the settings button is pressed the product is activated with the last setting.
-
USB 2 always has an output voltage 5.0 VDC.
-
Connect the product to an easily accessible power point near the appliance to be supplied with power.
PRODUCT DATA SHEET (EU) 2019/1782
Information published
|
Value and precision
|
Unit
---|---|---
Manufacturer’s name or trade mark, commercial registration number and address|
Anslut
| ****
–
Model identifier|
021124
|
–
Input voltage|
230
|
V
Input AC frequency|
50
|
Hz
Output voltage|
5,0
|
V
Output current|
2,4
|
A
Output power|
12
|
W
Average active efficiency|
80,1
|
%
Efficiency at low load (10 %)|
77,8
|
%
No-load power consumption|
0,08
|
W
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>