JULA 556-003 Wallpaper Table Instruction Manual

556-003 Wallpaper Table
Instruction Manual

Read these instructions carefully before assembly!

ASSEMBLY

1. Take the folding wallpaper table out of the box.
2. Lay the table down on a dry, flat surface.
3. Open the left and right work surfaces.
4. Set up the tubular steel frame (fig. 1).
5. Connect the two supports with the locking sleeve (fig. 2).
6. Press the U-shaped legs into the black plastic clips (fig. 3).
7. Set the wallpaper table upright (fig. 4 ).

NOTES

1. Stand the wallpaper table on an even floor.
2. The table must not be loaded with more than 50 kg. Do not stand or sit on the table, and do not lean against it.
3. Always be careful when cutting wallpaper on the table so as not to damage the melamine surface.
4. Handle the table with care to avoid damage to the aluminum frame and plastic edges.
5. Clean the table with a soft cloth. Do not use solvents such as thinner, alcohol, or benzene. Such products will damage the white scale and the finish of the table.

Jula reserves the right to make changes.
For the latest version of operating instructions, see www.jula.com
Jula AB, Box 363, SE-532 24 SKARA
2021-12-20
© Jula AB

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>