jula 422-345 Outdoor Light Instruction Manual
- June 4, 2024
- JULA
Table of Contents
Installation Instructions for Outdoor Light
Operating instructions (Translation of the original instructions)
SAFETY INSTRUCTIONS
Read the instructions carefully before use.
Save the instructions for future reference.
- Make sure to correctly connect all the wires.
- Do not use the light fitting without the globe. Replace a damaged globe immediately.
- Do not use the light fitting if the power cord is damaged.
- Disconnect the mains supply before installing, or carrying out any maintenance on the light fitting.
ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried
out by an authorized electrician. If you have the necessary experience and
knowledge, you may replace switches and power points, fit plugs, extension
cords, and light sockets. If not, you should contact an electrician. Incorrect
installation can result in electric shock or fire.
TECHNICAL DATA
| Rated voltage | 230 V ~ 50 Hz |
|---|---|
| Max. output bulb | 75 W |
| Max. output low energy bulb | 23 W |
| Socket | E27 |
| Protection rating | IP54 |
| Safety class | I |
INSTALLATION
Electrical connection
IMPORTANT: Make sure the power is switched off before connecting the
wires to the light fitting.
- Mark out on the supporting surface where the light fitting is to be fitted. Drill screw holes if necessary.
- Insert the power cord through the grommet on the back of the light fitting.
- Screw on the light fitting.
- Connect the green-yellow earth wire to the earth terminal
- Connect the blue wire to the terminal marked L.
- Connect the neutral wire to the terminal marked N.
- Insert a bulb.
- Fasten the globe to the light fitting with the three retaining screws.
Care for the environment!
Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com