OPT7 Aura Underglow Flexible Lighting Kit Installation Guide
- June 4, 2024
- OPT7
Table of Contents
OPT7 Aura Underglow Flexible Lighting Kit
FLEXIBLE LED LIGHT STRIP 36″ & 48”
INSTALLATION
STEP 1
Decide where to locate the control box and ensure wiring has enough length
for light strips to be installed in desired location.
IMPORTANT:
The control box must be installed inside the vehicle as it is not waterproof.
Avoid installation areas of the engine bay + heated surfaces.
- As shown below, connect all light LED strips to the control box with the included extension cables.
- Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.
- or connect the positive wire to the fuse tap and connector the open negative wire to a ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.
IMPORTANT: Connecting to more then 10amp will override the kit and cause early failure, ensure it is 10amps or less.
WARNING:
Please ensure that the led strips/control box/wiring all are mounted in areas
where will not exceed 85C or 185F.
STEP 2
Secure Control box in desired location with Velcro or zip ties. CONTROL BOX
NOT WATERPROOF Ensure the control box is safely and securely hidden from
exposing elements of moisture.
STEP 3
Mount brackets to secure the strip first.
STEP 4
Secure the light strips using the zip ties to tie all the wiring away from the
moving components.
IMPORTANT:
The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE around the LED connectors to ensure the
longevity of the lighting kit.
STEP 5
Using the included E-Z Remote, select your desired color or pattern.
AUX WIRING FOR A DOME / DOOR LIGHT
Please scan to see a detailed instructions on Door Assist Sync or go to https://support.opt-7.com/549690-AURA-Door-Assist-Installation-Guide.
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance
Modified installations or installation recommendations not specified by OPT7
Lighting will void the product warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>