Shaoxing Juyi I5i Sync Bedside Lamp User Manual

Shaoxing Juyi I5i Sync Bedside Lamp User Manual

Description

I5i smart wireless sync light is a set of wireless connected lamps, a multifunctional bedside lamp as the master lamp, and a rechargeable night lamp as the servant lamp. By touching the power button on the top of the master lamp, users can adjust the brightness and RGB color. Switching into the orange lighting mode so that the Aid-sleeping would be activated. User can sync control the servant lamp by switch into low brightness of the bedside lamp, and all the servant lamps could be sync light off while the master lamp switch into other brightness mode except the low brightness. The servant lamp has 5 brightness levels of choice, ii also has memory setting of brightness, and keep in mind that the brightness of servant lamp can only be adjusted by its own button but not by the master lamp. A master lamp could sync control any servants lamp within an effective control rang. (the servant lamp will be light up/off as the master lamp is turned on/off). One master lamp can pair with unlimited servant lamps, but one servant lamp could be sync control with 10 pieces master lamps at most. The sync control between master lamp and servant lamp only works under the situation that they’ve been paired successfully ahead of time.

Specification

1. Master lamp/Bedside lamp
   A. Brightness Level: 4 brightness levels
   a. low brightness 80LM
   b. Mid brightness 160LM
   c. High brightness 260LM
   d. Read lighting 700LM
   B. Color temperature:3000k warm white
   C. CRI:~95, no glare lights, weak blue light, flicker free,
   does not hurt the eyes.
   D. RGB lights: Orange lights (aid-sleeping mode).
   256x256x256 kinds of color.
   E. Output port: 5V ,2A.
   F. Aid-sleeping mode: In the aid-sleeping mode/orange
   lights, the device will be off after 30mins.
   G. Si2e and weight: 95x95x218mm,500g.

2. Servant lamp/Night lamp
   A. Brightness Level: 3LM,9LM,15LM,21LM,30LM.
   B. Color temperature:3000k warm white
   C. CRI:> 80
   D. Polymer lithium battery: 500mAh.
   E. Play time: 7 hours with maximum brightness and 60 hours with low brightness. Lamp stand by time is 3 months. Standby mode could last around one month if the night lamp is on less than 15 minutes every day.
   F .Size and weight:85x85x38mm, 110g.
   G. Hanging method: magnet, nails, or string.

3. Power Supply Night lamp
   Master lamp/bedside lamp: AC 85V-260V
   0-0.1A (220V) 0-0.2A (110V)
   Servant lamp/Night lamp: DC 5V 1A

4. Wireless connected: indoor< 30M,Outdoor< 50M

5. Packing:1x master lamp, 1xservant lamp, 1x 1 M USB cable, 1x ,P25mmmental,1x User Manual.

Operation

1. Pairing mode
   a. Make sure the servant lamp is off, then hold the button of the bottom until it keeps fishing. The servant lamp is now ready for pairing.
   b. Make sure the master lamp has been cut off the power for more than 1 minutes, then turn on the master lamp by long press the power button (the top metal) for 5 seconds. The master lamp would start fishing, then stop pressing the button, which means ii is ready for pairing. The servant lamp would turn into solid light if it has been paired with the master lamp successfully. Then long touch the power button for 3 seconds so that the master lamp will be off ,finishing the
   pairing process.

2. Lighting
   A. Master lamp/Bedside lamp
   How to control the lights?
   Charge the master lamp and hold the power button for 3 seconds, then the lamp would light up. To turn off the lamp, just touch the power button for 3 seconds. To change brightness, just short touch the power button to select brightness level. The light will switch to low brightness, medium brightness, high brightness, reading lights, Aid sleeping lights, and breathing RGB lights accordingly. Under the breathing RGB lights mode, the lights cycle has an extensive selection of colors, to stay in a certain color, just short touch the power button again. Aid sleeping mode: Under the aid-sleeping mode/orange lighting mode, the device will be off after 30mins. Noticed that auto-off would not work under other lighting modes.
   Output port: When the devices is in energizing status, user could charge the phones or tablets by connecting the output port. Output port (DC 5V-2A)
   B. Servant lamp/Night lamp
   How to control the servant lamp?
   Short touch the power button on the top of the servant lamp to light up/off, singly click the button on the bottom of the servant lamp to change the brightness. The brightness would switch from level 1 to level5(the highest brightness). The servant lamp has the memory setting of brightness mode.
   C. Sync control servant lamp
   Light up the master lamp and stay in the low brightness mode for 3 seconds, then all the servant lamps which have been paired with the master lamp before would light up after three seconds . All the servant lamps will be turned off once the master lamp turns into other brightness mode except of low brightness.
   D. Input: Using normal adaptor 5V with the charging cable to charge the night lamp. Red indicator light means charging successfully. When the light changes to green means it is fully charged, and intakes approximately one hour to fully charge.

3. Warning

• A. The servant lamp must be paired with master lamp firstly, then the servant lamp can be sync control by the master lamp.
• B. The Sync function of the servant lamp only work if the master lamp stays at low brightness for more than 3 seconds.
• C. The sync control range is around 50 meters, all the operation only works within an effective control range.
• D. If don’t need to light up the servant lamp, please don’t stay at the low brightness of the master lamp for more than 3 seconds.
• E. Please use finger or palm to touch the power button to control the lamp.
• F. When one servant lamp has been paired with more than one master lamps, all the sync operation would follow priority principle. (The servant lamp will be turned on by the master lamp that is turned on first, and the servant lamp will be turned off by the master lamp that is turned off first. These two master lamps could be two different lamps as long as they’ve been paired with the servant lamp.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>