CON-SERV EB 046 Removing Flow Control User Guide
- June 4, 2024
- CON-SERV
Table of Contents
CON-SERV EB 046 Removing Flow Control
INSTALLATION INSTRUCTIONS
-
Unscrew hose conical nut from Wall Outlet Elbow.
-
Use 2.5mm hex key to unscrew 5mm grub screw.
-
Ease the Wall Outlet Elbow off the spigot ensuring the grub screw does not come into contact with the o-ring seal.
-
Once exposed, unscrew the spigot from the thread using a spanner.
-
Once spigot has been removed from thread, use a hand tool to lever circlip from spigot and remove flow control.
NOTE: Remove flow control from spigot for full flow shower.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>