Shenzhenshi Weizhichuang Technology CW340 3 In 1 Fast Charger Instruction Manual
- June 8, 2024
- Shenzhenshi Weizhichuang Technology
Table of Contents
CW340 Instruction Manual
3 In 1 Fast Charger
CW340 3 In 1 Fast Charger
Wirelee Charaina Guide
Please use the USB-A Adapter that comes with the package or the quick charger
2.0 or 3.0 chargers with USB-A ports are recommended.
Charging with Cases
Correct charging tips
Introduction :
Compatibility Sheet:
-
Smartphone
(For Apple) iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13 mini, iPhone 13, ‘Phone 13 Pro,iPhone 13 Pro Max,iPhone 14, iPhone 14 Max,iPhone 14 Pro,iPhone 14 Pro Max; -
Applicable Devices Smart Watch
Watch 2/3/4/5/6/SEM (and subsequent watch models are available) -
Earbuds AirPods 2/3/Pro
Operation instructions:
- Charge the Bluetooth headset, lay the Bluetooth headset flat in the Bluetooth headset charger area (Note: If the headset comes with a thick silicone
- Charge the Bluetooth headset, lay the Bluetooth headset flat in the Bluetooth headset charger area (Note: If the headset comes with a thick silicone (Note: If the headset has a thick silicone cover, it may lead to poor contact and cannot be charged, please take off the silicone cover before charging).
- Charge the watch: Stand up the watch’s wireless charging module and place your watch on it so that it is aligned with the magnetic Iine.When the watch displays the charging logo, it means the watch is charging.
The use of product folding
Product specifications
| Name | Wireless Charger | Model | CW340 |
|---|---|---|---|
| Product size | 2617512mm | Transmission distance | _5mm |
| Input | 9V — 2A | Maximum output power | UP TO 2.5W for Watch UP TO 15W for |
Cellphone UP TO 3W for Earbuds
FCC WARNING STATEMENT
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
‘equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End•users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>