Einhell TH-OS 1016 Multiple Grinder Sander Instruction Manual

Einhell TH-OS 1016 Multiple Grinder Sander

Product Information

TH-OS 1016 Multischleifer

The TH-OS 1016 Multischleifer is a versatile tool that can be used for grinding and sanding various materials. It comes with a dust collection bag and can be connected to a vacuum cleaner for efficient dust removal. The device has a maximum sound power level of 90 dB(A) and a vibration emission value of 7.5 m/s². The sandpaper can be attached to the device using a hook- and-loop system.

Technical Specifications

• Sound pressure level LpA: 79 dB(A)
• Uncertainty KpA: 3 dB
• Sound power level LWA: 90 dB(A)
• Uncertainty KWA: 3 dB
• Vibration emission value ah: 7.5 m/s²
• Uncertainty K: 1.5 m/s²
• Power supply: 230V/50Hz
• Power consumption: 100W

Safety Instructions

Read the operating instructions carefully before using the device. Always wear protective eyewear and a breathing mask when working with the device. Do not use the device on materials containing asbestos.

Product Usage Instructions

1. Assembly of Dust Collection Bag: Insert the dust collection bag onto the dust extraction port located at the back of the device.
2. Sanding Paper Attachment: Attach the sandpaper to the device using the hook-and-loop system. Ensure that the sandpaper has the appropriate dimensions and holes.
3. Power Connection: Connect the device to a power supply of 230V/50Hz.
4. Dust Extraction: Connect the device to a vacuum cleaner using the dust extraction port for efficient dust removal.
5. Operation: Switch on the device and begin sanding or grinding the material. Always wear protective eyewear and a breathing mask during operation. Do not smoke or consume food while operating the device.
6. Cleaning and Maintenance: Always disconnect the device from the power supply before cleaning. Clean the device after every use to ensure its durability and longevity.

For more information on replacement parts and warranty, visit our website at www.isc-gmbh.info.

• Caution – Read the operating instructions to reduce the risk of inquiry.
• Wear ear-muff s. The impact of noise can cause damage to hearing.
• Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!
• Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.

Important

When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well. We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety instructions.

Safety regulations

The corresponding safety information can be found in the enclosed booklet.

Warning!
Read all the safety information, instructions, illustrations and technical data provided on or with this power tool. Failure to adhere to the following instructions may result in electric shock, fi re and/or serious injury.
Keep all the safety information and instruc-tions in a safe place for future use.

Layout and items supplied

Layout (Fig. 1/2)

1. On/Off switch
2. Vacuum extractor connection
3. Handle
4. Dust bag
5. Oscillating plate

Items supplied
Please check that the article is complete as spe-cifi ed in the scope of delivery. If parts are missing, please contact our service center or the nearest branch of the DIY store where you made your purchase at the latest within 5 work days after purchasing the article and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the warranty provisions at the end of the operating instructions.

• Open the packaging and take out the equip-ment with care.
• Remove the packaging material and any packaging and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, please keep the packaging until the end of the guarantee period.

Important!
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suff ocating!

• Multiple grinder/sander
• Dust bag
• 1 x abrasive paper (120)
• Original operating instructions
• Safety instructions

Proper use

The machine is designed for the grinding/san-ding of wood, metal, plastic and similar materials using the appropriate grinding/sanding paper. The equipment is not suitable for wet grinding/sanding.
The equipment is to be used only for its prescri-bed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or inju-ries of any kind caused as a result of this.
Please note that our equipment has not been de-signed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

• Mains voltage: ………………………….. 230 V ∼ 50 Hz
• Power input: ……………………………………….. 100 W
• Idle speed: ………………………………….12,000 min-1
• Oscillating speed: ………………………..24,000 min-1
• O scillatory circuit: ………………………………. 1.6 mm
• Grinding/sanding area: ……… 150 x 150 x 100 mm
• Abrasive paper size
• (Hook-and-loop fastening system): …………………………………………………………. 150 x 150 x 100 mm
• Protection class: …………………………………….. II/
• Weight: ……………………………………………….1.0 kg

Sound and vibration
Sound and vibration values were measured in accordance with EN 62841.

• LpA sound pressure level …………………… 79 dB(A)
• KpA uncertainty ………………………………………3 dB
• LWA sound power level …………………….. 90 dB(A)
• KWA uncertainty ………………………………………3 dB

Wear ear-muff s.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in accordance with EN 62841.

• Vibration emission value ah = 7.5 m/s2
• K uncertainty = 1.5 m/s2

The stated vibration emission levels and stated noise emission values were measured in accordance with a set of standardized criteria and can be used to compare one power tool with another.
The stated vibration emission levels and stated noise emission values can also be used to make an initial assessment of exposure.

Warning:
The vibration and noise emission levels may vary from the level specifi ed during actual use, depending on the way in which the power tool is used, especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.

Limit the operating time!
All stages of the operating cycle must be considered (for example, times in which the electric tools are switched off and times in which the tool is switched on but operates without load).

Residual risks
Even if you use this electric power tool in accordance with instructions, certain residual risks cannot be rules out. The following hazards may arise in connection with the equipment’s construction and layout:

1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and maintained.

Before starting the equipment

Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.

Fitting the dust bag (Fig. 2-3/Item 4)

• Slip the dust bag (4) onto the dust extraction connector (2).
• The dust is extracted directly into the dust bag through the abrasive paper and the oscillating plate (5).
• To empty the dust bag, open it and carefully tap out the contents.
• You can also connect the equipment by the dust extraction connector (2) directly to a suitable vacuum cleaner (Fig. 3).

Important!
For health reasons it is imperative that you use the dust bag or a dust extraction system.

Fastening the abrasive paper with the hook-and-loop fastening system (Fig. 4)

• Only use sanding/grinding paper of the appropriate size and suitable perforations.
• Place the sanding/grinding paper on the oscillating plate (5) as shown in Fig. 4. Make sure that the perforations in the sanding/grinding paper line up with the oscillating plate.

Operation

Switching the equipment ON/OFF (Fig. 1/ Item 1)
To switch on the equipment, slide the switch (1) from 0 to 1.

Working with the Multiple Grinder/Sander

• Place the whole surface area of the sanding disk on the material.
• Switch on the machine and move it with gent-le pressure over the workpiece completely circular movements or moving it to and fro and up and down.
• Use a coarse paper for coarse sanding and a finer paper for finish sanding. You can find the best paper for the job by means of testing.

Important.
The dust generated when working with the machi-ne may be harmful.

• Always wear goggles and a dust mask when carrying out sanding/grinding work.
• Everybody who uses the machine or enters the workplace must wear a dust mask.
• Do not eat, drink or smoke at the workplace.
• Do not use the machine on paints which con-tain lead.

Replacing the power cable

If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its after-sales service or similarly trained personnel to avoid danger.

Cleaning, maintenance and spare parts

Cleaning, maintenance and ordering of spare parts

Always pull out the mains power plug before star-ting any cleaning work.

Cleaning

• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could at-tack the plastic parts of the equipment. Ensu-re that no water can seep into the device. The ingress of water into an electric tool increases the risk of an electric shock.

Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualifi ed electrician. Important! The carbon brushes should not be rep laced by anyone but a qualifi ed electrician.

Maintenance
There are no parts inside the equipment which require additional maintenance.

Ordering replacement parts:
Please quote the following data when ordering replacement parts:

• Type of machine
• Article number of the machine
• Identification number of the machine
• Replacement part number of the part required For our latest prices and information please go to www.isc-gmbh.info

Disposal and recycling

The equipment is supplied in packaging to pre-vent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you should ask in your local council offices.

Storage

Store the equipment and accessories out of children’s reach in a dark and dry place at above freezing temperature. The ideal storage tempe-rature is between 5 and 30 °C. Store the electric tool in its original packaging.

For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any ac-cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes

Service information

We have competent service partners in all countries named on the guarantee certifi cate whose contact details can also be found on the guarantee certifi cate. These partners will help you with all service re-quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Warranty certificate

Dear Customer,
All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the service number shown. Please note the following terms under which guarantee claims can be made:

1. These guarantee terms apply to consumers only, i.e. natural persons intending to use this product neither for their commercial activities nor for any other self-employed activities. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition to their statutory rights of guarantee. Your statutory guarantee claims are not aff ected by this guarantee. Our guarantee is free of charge to you.

2. The warranty services cover only defects due to material or manufacturing faults on a product which you have bought from the manufacturer mentioned below and are limited to either the rectifi cation of said defects on the product or the replacement of the product, whichever we prefer.
   Please note that our devices are not designed for use in commercial, trade or professional applica-tions. A guarantee contract will not be created if the device has been used by commercial, trade or industrial business or has been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

   • Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type) or a failure to follow the maintenance and safety instructions or by ex-posing the device to abnormal environmental conditions or by lack of care and maintenance.
   • Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for ex-ample by dropping it).
   • Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device.

4. The guarantee is valid for a period of 24 months starting from the purchase date of the device. Gu-arantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fi tted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies if an on-site service is used.

5. To make a claim under the guarantee, please register the defective device at: www.isc-gmbh.info. Please keep your bill of purchase or other proof of purchase for the new device. Devices that are returned without proof of purchase or without a rating plate shall not be covered by the guarantee, because appropriate identification will not be possible. If the defect is covered by our guarantee, then the item in question will either be repaired immediately and returned to you or we will send you a new replacement.

Of course, we are also happy off er a chargeable repair service for any defects which are not covered by the scope of this guarantee or for units which are no longer covered. To take advantage of this service, please send the device to our service address.
Also refer to the restrictions of this warranty concerning wear parts, consumables and missing parts as set out in the service information in these operating instructions.

• Telefon: 09951 / 95 920 00
• Telefax: 09951/95 917 00
• E-Mail: [email protected]
• Internet: www.isc-gmbh.info
• iSC GmbH · Eschenstraße 6 · 94405 Landau/Isar (Deutschland)

References

• iSC GmbH Spareparts for Tools and Gardenequipment
• iSC GmbH Spareparts for Tools and Gardenequipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>