VANKYO Leisure 495W Native 1080P Mini Projector User Manual

VANKYO Leisure 495W Native 1080P Mini Projector

Dear customer

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

• ✉ www.alza.co.uk/kontakt
• ✆ +44 (0)203 514 4411

Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

WHAT´S INCLUDED

NOTICE

Recommended

NOT Recommended

PRODUCT OVERVIEW

QUICK START

Projector Installation

Note: Whichever installation option you select, please make sure:

1. The projector is centered directly in front of the wall/screen, but not tilted or placed at an angle toward the wall/screen;
2. To select the corresponding projection mode so the images can be projected correctly.

Power On/Off

Images Adjustment

• Rotate the Keystone Correction Ring to correct Vertical Keystone Distortion until the image is evenly rectangular.
• Rotate the Focus Ring to sharpen the Image Focus until the blurred image becomes clear.
• In Homepage interface, enter Setting > Image Scaling to enlarge or reduce the Image Size from 75% to 100% (optional)

Homepage Overview

The default interface after boosting is Homepage as shown.

In Homepage interface, when the underscore cursor locates at the Main Menu Bar, press / to toggle though menu items including MultiMedia, Input Source and Setting. Press / OK to enter the corresponding Submenu, then press to return to Main Menu Bar.

• Multimedia page display file categories of Multimedia Input (typically for a USB Disk), including MOVIE, PHOTO, MUSIC and TEXT.
• Input Source page display three categories of input source, including MULTISCREEN, HDMI, and AV.
• Setting page will guide you through all settings for the projector.
• The icon will light up when the projector is successfully connected to a Bluetooth audio device.
• The icon will turn into when the projector is successfully connected to a Bluetooth audio device.
• The icon will turn into when a USB disk is inserted.

MULTIMEDIA CONNECTION

USB Disk Connection

Step 1: Turn on the projector and insert your USB disk into the USB 1/USB 2 port of the projector.

Step 2: Go to Homepage > Multimedia and select the file category you would like to display among MOVIE, PHOTO, MUSIC and TEXT, then enter the inserted USB Disk to check all files stored.

Step 3: To play a video movie file, please follow the below steps:

• Select MOVIE in the MultiMedia interface to correspondingly read video files stored.
• Press OK / on the projector/remote for a certain video file to enter full-screen display.
• Press OK on the projector or press OK/Menu on the remote when playing back a video to bring up the toolbar to control the video playing.

Note: Operation for playing a photo file, a music file and a text file is the same with that for playing a video file, but please make sure to select the correct file category; that is, for playing a photo file, select Photo in MultiMedia interface, likewise, for music, select MUSIC, for text, select TEXT.

Step 4: Press on the projector/remote to go back to Homepage.

HD Connection

• Step 1:  Turn on the projector and connect your device to the HDMI port of the projector with the provided HD cable.
• Step 2: Go to Homepage > Input Source, select HDMI as the input source, then the contents of your will be mirrored to the screen/wall

Tip

For Window 7 or higher system, press the “Window Logo + P” key combination to access the below four display modes.

• PC screen only option displays contents on computer screen only.
• Duplicate option display the same contents on both computer screen and projected scree.
• Extend option splits the display between the computer screen and the projected screen.
• Second screen only option display contents only on the projected screen.

AV Connection

• Step 1: Turn on the projector and connect your device to the AV port of the projector with an AV cable (not included)

• Step 2: Go to Homepage > Input Source, select AV as the input source, then the contents of your device will be mirrored to the screen/wall.

SCREEN MIRRORING

For iOS System

Screen Mirroring via Router´s WIFi

• Go to Homepage > Input Source, select MULTISCEEN as the input source to enter the CAST interface.

• Select Cast Setting > WiFi Setting to search and connect the projector to your router´s WiFi

• Enter WiFi settings of your iOS device and connect it to the same router´s WiFi

• Return the screen back to CAST interface, then select iOS Cast to enter the following interface.

• Activate Screen Mirroring/AirPlay Mirroring in the Control Center of your iOS device and search of the projector

• Select LEISURE-495W-XXXX-(icast) from the searching list to connect.

• The contents on your iOS device will be mirrored to the wall/screen after a successful connection.

Tip: To activate screen mirroring function of your MacBook, please follow the below steps:

• Turn on the WiFi switch on your Android device.
  • Note: Successful WiFi connection is not a must, but please make sure the WiFi switch on your Android device is ON.
• Go to Homepage > Input Source, select MULTISCEEN as the input source to enter the CAST interface.
• Select Miracast to enter the following interface.
• Activate Multi-screen function on your Android device and search for the projector.
• Select LEISURE-495W-XXXX from the searching list to connect.
• The contents on your Android device will be mirrored to the wall/screen after a successful connection.

For Windows 10 System

To activate this function, your Windows 10 device must support the Miracast feature.

• Turn on the WiFi switch on Windows 10 device.
  • Note: Successful WiFi connection is not a must, but please make sure the WiFi switch on your Windows 10 device.
• Go to Homepage > Input Source, select MULTISCEEN as the input source to enter the CAST interface.
• Select Windows Cast to enter following interface.
• Press the “Windows Logo + P” key combination on your keyboard to enter PROJECTOR interface, then select “Connect to wireless display” to search the projector.
• Select LEISURE-495W-XXXX from the searching list to connect.
• The contents on your Windows 10 device will be mirrored to the wall/screen after a successful connection.

Notes

• The fluency of screen mirroring will be affected by the network environment. A badwidth of 100Mbit or more is recommended when using screen mirroring.
• Make sure your mobile device is close to the projector when using wireless connection. A distance within 3ft is recommended.
• Some mobile device may not support screen mirroring due to the compatibility.
• Due to copyright restriction of Hulu, Netflix, and similar services, the contents on these streaming services CAN NOT be mirrored or cast.
• If the projected image freezes, please robot the projector, the go to Homepage > Input Source > MULTISCEEN > Cast Settings > Restore Factory Default and select Confirm to do a reset on screen mirroring module.

SCREENCASTING

• Connect your mobile device and the projector to the same router´s WIFi.
• Go to Homepage > Input Source, select MULTISCREEN as this input source to enter the CAST interface
• Select DLNA to enter the following interface.
• Launch a video player APP on your mobile device and select a video to play.
• Tap to search for the projector.
• Select LEISURE-495W-XXXX-(dlna) to connect.
• The contents on your device will be cast to the wall/screen.

Notes: When you cast a video from your mobile device, the video will only be displayed on the projected screen and you can still use your mobile device without interrupting the video or showing any of your other content.

BLUETOOTH CONNECTION

The projector support connection with Bluetooth audio devices (typically Bluetooth speaker/earphones/soundbars). It allows you to ger good-quality audio output from a streaming device or other video source.

• Make sure the Bluetooth audio device is ready to pair.
• Go to Homepage > Setting, then enter Connection Setting > Bluetooth to access the following interface.
• Press to turn on Bluetooth of the projector and search for the Bluetooth audio connect.
• After a successful connection, the Bluetooth icon on the Homepage will light up.

Notes

• When a Bluetooth audio device is paired with the projector, the built-in speaker system and Audio Out port pf the projector are disabled.
• To turn off Bluetooth of the projector, please go to Homepage > Setting > Connection Setting > Bluetooth, then press or you can press on the remote to quicky turn off the Bluetooth in the course of screen mirroring.

SETTING

Settings for Screen Mirroring Module

Go to Homepage > Input Source, select MULTISCEEN as the input source to enter the CAST interface, then enter Cast Settings to access setting options exclusive for screen mirroring module.

WiFi Setting

• Connect the Projector to your router´s WiFi.

Online Update

• Enter to update the firmware of screen mirroring module when a newer version is available.

Restore Factory

• Default Restore the screen mirroring module to the factor settings.

Software Version

• Check system version of the projector.

Settings for the Projector System

How to Enter

Option 1: Go to Homepage > Setting to access Picture Setting, System Setting and Connection Setting. Be sure to press to check the full list of setting options.

Option 2: In any interface, press on the remote to quickly access Picture Setting, System Setting and Connection Setting.

Picture Setting

Projection Mode

Depending on how you position the projector, you may need to change projection modes so that the images can be projected correctly. Available options include Normal Front(default), Normal Back, Invert Front and Invert Back.

Image Scaling

• Enter to enlarge or reduce image size from 75% to 100%.

Aspect Ratio

• Enter to change Aspect Ratio among AUTO(default), 4:3 and 16:9

Note: Select AUTO, the the projector will set the aspect ratio automatically according to the input source.

Picture Mode

• Options include Standard, Soft, User and Dynamic. You can use the Left/Right button to toggle thought all the available options.

System Setting

OSD Language

• Enter to select a language for the projector.

Software Update (USB)

• Update the projector using a USB disk with upgrade file named as YG460R3_ST58.bin. (Contact our costumer service to get the upgrade file.)

Restore Factory Default

• Restore the projector to the factory setting.

Auto Sleep Timer

• Set the time duration for the projector to turn off automatically. Options include Never, 4Hours, 6Hours and 8Hours.

Connection Setting

WiFi Setting

• Connect the projector to your router´s WiFi.

Bluetooth

• Turn on to search and connect the projector to any Bluetooth audio device (typically Bluetooth speakers/earphones/soundbars) and get good-quality audio output.

PROJECTION DISTANCE & SIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
• Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

85mm)

Photo Format Supported| JPEG/BMB/PNG
Mounting Screws| 1/4”
Video Format Supported| 3GP(H.263, MPEG4)/AVI(XVID, DIVX,H.264)

/MKV(XVID,H.264,DIVX)/FLV(FLV)/ MOV(H.234)/MP4(PEG4,AVC)/MPG(MPEG1)/ VOB(MPEG2)/MPG(MPG- PS)/RMVB(RV40)/RM

Ports| USB Port x 2 / HD In x 1 / AV in x 1 / Audio

Out x 1

Light Source| LED
Input Signal| 576i 720P 1080i 1080P
Aspect Ratio| 4:3/16:9/Auto
Electronic Keystone| ±15°
Power Supply| AC 100-240V, 50/60Hz
Unit Net Weight| 3.086 lbs(1.4kg)
Audio Format Supported| MP3/WMA/OGG/AAC/FLAC/WAV
Screw Number| Not included

TROUBLESHOOTING GUIDE

The contents from Hulu, Netflix and similar services can not be mirrored or cast

• Due to the copyright restriction from Hulu, Netflix and similar services, the contents CAN NOT be mirrored.

What should I do if I want to watch the content from Hulu, Netflix and similar services via the projector?

• Please prepare a Fire TV sick, Roku stick or ChromecastTM (not included), then connect it to the projector.

Blurry Image

• Adjust focus ring/keystone.
• Projector and screen/wall must be in effective distance.

Remote Unresponsive

• Make sure remote points at IR receiver directly.
• Do not cover IR receiver.
• Try a new pair of AAA batteries.

Upside Down Images

• Go to Homepage > Setting > Picture Setting > Projection Mode to flip projection image.

Factory Reset

• Reset the screen mirroring module to the factory settings. Go to Homepage > Input Source > MULTISCEEN > Cast Settings > Restore Factory Default, the select Confirm to do a reset.
• Reset the projector to the factory settings
• Go to Homepage > Setting > System Setting > Restore Factory Default or press on the remote in any interface to access System Setting and enter Restore Factory Default, then select Confirm to reset the projector to default settings.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative

• Importer: Alza.cz a.s.
• Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
• CIN: 27082440

Subject of the declaration

• Title: Projector
• Model / Type: 495W

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s)

• Directive No. 2014/53/EU
• Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• Alza | Alza.fr
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>