NEUTYECHIC Makeup Vanity Desk with Mirror Instruction Manual
- May 15, 2024
- NEUTYECHIC
Table of Contents
NEUTYECHIC Makeup Vanity Desk with Mirror
Product Information
Specifications:
- Total Hardware List: 71 pieces
- Parts List:
- Two-in-one screw (6*28mm): 71 pieces
- Two-in-one nut (10*12mm): 71 pieces
- Wood chipping (6*30mm): 10 pieces
- Handle & screw (4*16mm): 2 pieces
- Drawer slides & screw (4*16mm): 4 pieces
- Foot rubber pad: 8 pieces
- Tension screw (6*20mm): 10 pieces
- Iron pin screw (6.7*35mm): 4 pieces
- Wire clamp: 1 piece
- Light bulb: 11 pieces
- Switch: 1 piece
- AC/DC Adapter (12V=1.5A): 1 piece
- Double-head screwdriver: 1 piece
Product Usage Instructions
Assembly Part 1: Drawers
- Use parts 1 and 2 to assemble the drawers.
- Follow the clockwise and anti-clockwise steps for installation.
- Repeat the installation process for each drawer.
Assembly Part 2: Desk
- Follow the provided installation steps for assembling the desk.
- Ensure to use all listed accessories during installation.
Assembly Part 3: Mirror and Bulbs
- Install the Hollywood Mirror following the provided steps.
- Make sure to remove any protective film before installation.
- Properly insert cables on bulbs through prepared holes on the board.
Assembly Part 4: Vanity Stool
- Assemble the vanity stool according to the installation guide.
- Stick the black bottom pad on stands as instructed.
Frequently Asked Questions
Q: What should I do if I encounter any problems with usage?
A: If you encounter any issues with using the product, please contact our customer support for assistance.
Q: Can I use tools other than the double-head screwdriver for assembly?
A: While a double-head screwdriver is recommended, you can use other suitable tools if needed, ensuring proper assembly.
Hardware List
Parts List
Product structure
Assembly
Assembly Part 1: Drawers
The following pages are installation guide of drawers(set of 2).
Installation steps
Assembly Part 2: Desk
The following pages are installation guides of desk only.
Installation steps
Assembly Part 3: Mirror and Bulbs
Installation steps
Make sure that you insert 2 cables on bulb through prepared holes on board, suggest to insert once a time.
In case of miswiring, make sure you connect the first bulb with the switch. Please note that the starter bulb could be either side board, depending on your nearest socket location.
Assembly Part 4: Vanity Stool
Installation steps
We hope you enjoy your purchase. All of our products are crafted with an obsessive attention to detail. Any problem with usage, please watch the video or contact us. We look forward to assisting you in the further.
Email: service@neutypechic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>