Eltako DL-N2-80mA DALI Bus Power Supply Unit Instructions
- June 3, 2024
- Eltako
Table of Contents
Eltako DL-N2-80mA DALI Bus Power Supply Unit Instructions
DALI bus power supply unit DL-N2-80mA
Only skilled electricians may install this electrical equipment otherwise there is the risk of fi re or electric shock!
Temperature at mounting location: -20°C up to +55°C.
Storage temperature: -20°C up to +75°C.
Relative humidity: 15% bis 90%.
DALI bus power supply unit with 80 mA output current for supplying up to 40
standard
DALI devices. 59 x 33 x 15 mm. Suitable for fl ush-mounted box and
installation in protection class II devices.
The connection terminals are plug-in terminals for conductor cross-sections
from 0,5 mm² to 1,5 mm².
Input: supply voltage range 120 V..240 V AC/ 50-60 Hz.
Maximum input current 10 mA. Power-up ramp-up time 250 ms. Power loss max. 2
W.
Output: Output voltage range 12 V DC..20.5 V DC.
Output current 80 mA.
No-load proof and short-circuit proof.
Degree of protection housing IP40.
Degree of protection terminals IP20.
Impulse voltage category II.
Pollution degree 2.
Rated insulation voltage 250 V.
Rated impulse voltage 4 kV.
Reinforced insulation.
Insulation test voltage 3 kV.
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 943 500 25
[email protected]
eltako.com
Manuals and documents in further languages
http://eltako.com/redirect/DL-N2-80mA