V12 Footwear MukGuard Overshoe Instructions
- June 16, 2024
- V12 Footwear
Table of Contents
V12 Footwear MukGuard Overshoe
Product Information
The MukGuard overshoe is a high-quality product designed to keep floors clean and provide safety for tradespeople. It is also a sustainable alternative to single-use plastic overshoes.
Specifications
- Material: Durable and flexible rubber
- Sizes available: 7-8, 11-12, 13-14
- Color: Black
Product Usage Instructions
Size
When choosing the size of your MukGuard overshoe, it is recommended to consider the following:
- If your shoe size is 7, opt for size 7-8 overshoes to ensure a comfortable fit.
- If your shoe size is 12, it is advised to choose size 13-14 overshoes for a better fit.
Should my overshoes be tight or loose?
MukGuard overshoes should have a snug fit against your footwear. It is important to avoid choosing overshoes that are too loose or slack, as they may slip off during use.
Application:
Follow these steps to correctly put on your MukGuard overshoe over a safety boot:
- Ensure your safety boot is worn on your foot.
- Hold the overshoe by the opening and stretch it slightly.
- Place the toe of your boot into the toe cap of the overshoe.
- Gradually pull the overshoe up, ensuring it covers the entire boot.
How long should it take to put on my overshoe?
With practice, it should take less than 30 seconds to put on your MukGuard overshoe. Take your time and follow the correct technique to achieve a secure fit.
Should I put on my MukGuard overshoe when I’m wearing my safety boots?
Yes, always put on the MukGuard overshoe when you are wearing the safety boot. Trying to put the overshoe over the boot without wearing it can result in difficulty pulling the cover on properly.
Should I be sitting or standing when I put MukGuard on?
If possible, it is recommended to sit and cross one leg over the opposite knee when putting on your MukGuard overshoe. This position provides better stability and reduces strain on your back. By following these instructions, you can confidently wear your MukGuard overshoes and ensure cleanliness while working.
FAQ
- Q: Do I need to buy the same size overshoe as my shoe size?
- A: It is generally recommended to choose an overshoe size that corresponds to your shoe size. However, if you have larger feet, it may be advisable to select a slightly bigger size for a better fit.
- Q : Can I wear MukGuard overshoes over any type of footwear?
- A: MukGuard overshoes are designed to be worn over safety boots. They may not provide an optimal fit or functionality when used with other types of footwear.
- Q : Are MukGuard overshoes waterproof?
- A: Yes, MukGuard overshoes are made of durable rubber material that provides water resistance.
Instructions of Use
So, you’ve decided on a pair of MukGuard. Good choice. MukGuard overshoes are a win-win. Actually, they’re a win-win-win.
- Win 1 – they keep customers happy by keeping their floors clean.
- Win 2 – their grip and professional look is great for tradespeople’s safety and brand.
- Win 3 – they’re a sustainable choice because they cut out the need for single-use plastic overshoes. In this MukGuard overshoe size guide, we’ve covered several of the most frequently asked questions we received about our award-winning overshoe. As well as this, we’ve included a guide on the best way to put on your MukGuard covers to ensure they’re doing their job, so you can do yours.
Size
Do I need the same size overshoe as my shoe size?
This depends on the type of safety boot you’re wearing. MukGuard has been developed for V12 boots, so if you’re in our footwear, you should have a fairly smooth ride. However, if you’re wearing a different brand of safety boot, particularly if it has features such as a durable scuff cap or a reinforced metatarsal guard, your boot might end up being a lot bigger than a conventional size 8. MukGuard overshoes come in dual sizing, so we recommend that if you wear a chunky boot with a scuff cap or broad features like a welted sole, going up a size is the right move
So, a quick re-cap:
- If you’re wearing a wide or chunky boot – go up a size
- If your shoe size matches the highest number of the overshoe dual sizing – go up a size
- If you’re wearing a V-12 boot or your shoe size is at the low end of the dual sizing – stay with that size
Should my overshoes be tight or loose?
Tight. A lot of wearers get put off by tight overshoes and worry that they haven’t been able to pull them on easily. While putting on a boot cover shouldn’t feel like you’re grappling with a wild bear, they should have a snug fit. MukGuard overshoes are supposed to be tight against your footwear, because if they’re loose or slack, not only could they end up slipping off, they could become snagged on something and cause a nasty accident. So don’t be another slip, trip, and fall statistic – ensure you have a tight fit.
Application
Is there a particular technique for putting an overshoe over a safety boot?
Yes.
It’s common for people to purchase overshoes for their outdoor work boots and
think they’re too small when in fact, they just haven’t put them on in the
right way. Following the recommendations below will help you get it right
quickly.
- Take the MukGuard overshoe and turn the heel inside out. This way, you can see more clearly how much material you have left to cover the shoe, and it will also enhance your grip when pulling it over the heel.
- Really push your toe cap down into the tip of the overshoe. Do not simply place it over the toe, because you all limit the material you need for the pull loop to go over the back of your boot.
- After your toe is in, take the sides of the MukGuard and tug them upward, again to leave enough material for a snug fit over your heel. MukGuard is made from multi-directional neoprene, so you can trust in the technology that gives you both elasticity and resilience.
- Finally, put your fingers through the pull loop and stretch it up over the heel of your boot.
How long should it take to put on my overshoe?
It might initially feel like a bit of a headache trying to get your boot into a snuggly fitting overshoe, particularly when the clock’s ticking and you’ve got work to do, but it is worth it! If you take your time and get your technique right, it’ll take less than 30 seconds. Remember: slow and steady wins the race.
Should I put on my MukGuard overshoe when I’m wearing my safety boots?
Yes. Always put MukGuard on when you’re wearing the boot. When people try putting their shoe covers over their footwear when holding the boot or putting their hand inside, it means they won’t be able to push the toe cap in as meaningfully to allow them to pull the whole cover on. (This technique has also resulted in several boots with half-attached shoe covers flying across various gardens and hallways. Be warned!)
Should I be sitting or standing when I put MukGuard on?
If possible, sit and cross one leg over the opposite knee when putting on your MukGuard. Standing and bending down isn’t great for your stability or back, and while we know there isn’t always a convenient bench in front of people’s houses if you can find a place to sit, use it! Take all this advice on board, and you and your MukGuard overshoes will be walking through your customers’ property with comfort, confidence, and cleanliness.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>