Eltako DL2-TK1L-N-50mA Channel Pushbutton Coupler Power Supply User Guide

: May 15, 2024
: Eltako

Table of Contents

Eltako DL2-TK1L-N-50mA Channel Pushbutton Coupler Power Supply
Product Information
Product Usage Instructions:
Instructions
Application and function
Delivery condition
Technical data
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Eltako DL2-TK1L-N-50mA Channel Pushbutton Coupler Power Supply

Eltako-DL2-TK1L-N-50mA-Channel-Pushbutton-Coupler-Power-Supply-product-
image

Product Information

Specifications:

Model: DL2-TK1L-N-50mA
Type: DALI-2 1-channel pushbutton coupler + power supply
Part Number: 33 000 028 – 1
Maximum Current: 50mA

Product Usage Instructions:

Installation:
Only skilled electricians should install this electrical equipment to avoid the risk of fire or electric shock. Follow the installation guidelines provided in the user manual.

Power Supply Connection:

Ensure the power supply is switched off before connecting the device.
Connect the power supply wires to the designated terminals on the coupler as per the wiring diagram.
Double-check the connections to ensure they are secure and correctly installed.
Turn on the power supply and verify that the device is functioning properly.

Operation:
Once installed, use the pushbutton coupler according to your specific application requirements. Refer to the user manual for detailed operational instructions.

FAQ

Q: Who should install this electrical equipment?
A: Only skilled electricians should install this equipment to prevent the risk of fire or electric shock.
Q: What is the maximum current supported by this device?
A: The device supports a maximum current of 50mA.

33 000 028 – 1
DALI-2 1-channel pushbutton coupler + power supply
DL2-TK1L-N-50mA

Instructions

Only skilled electricians may install this electrical equipment otherwise there is the risk of fi re or electric shock!

Temperature at mounting location: -20°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity: annual average value <75%.

Compact DALI-2 control module with 1 switching input. For installation. 59 mm long, 33 mm wide, 15 mm deep. Protection class: IP 20.
DALI-2 certified. DALI-2 is the newest generation of the DALI standard with an extended range of functions. DALI-2 devices also include all previous DALI functions and are therefore backwards compatible. Compact DALI-2 control module with 1 switching input for 230 V AC. With integrated DALI bus supply (50 mA), an additional bus supply may not be connected. Galvanic isolation between switching input and DALI interface. Multi-master capable, multiple modules can be installed on the same DALI line. Integrated DALI-2 Application Controller. Individual DALI commands effective range and switching functions can be assigned to each input. In addition to the standard DALI commands, the application controller also enables DALI DT8: Tunable White and White RGB(W) control as well as macros. The module has a DALI-2 instance for easy integration. Supports short press, long press (with repeat for dimming) and toggle. In addition to buttons, it is also suitable for switches. Easy configuration via a LUNATONE DALI interface and DALI-Cockpit Software tool. Application controllers and instances can be active at the same time. The polarity of the output voltage is visible on the housing (DA+, DA-).

Application and function

The DL2-TK1L-N-50mA serves as a universal module for controlling DALI-compatible lights.
The function of each switching input can be set individually.
Like other Lunatone control devices, the settings can be made using the DALI Cockpit software tool. In principle, a distinction is made between the application controller and the DALI-2 instances. The Application Controller leads to direct DALI control com-mands that are immediately executed by the DALI drivers. The DALI-2 instances generate event messages that are interpreted and further processed by higher-level control units (WAGO, Beckhoff, LUNATONE DALI-2 KNX Gateway). Application controllers and instances can be active at the same time.

Delivery condition

When delivered, a basic configuration is already implemented (factory settings). If necessary, this can be changed and adapted to the current application.