QSFPTEK S7300-24X2C Stackable L3 10G Switch User Manual

October 30, 2023
QSFPTEK

QSFPTEK S7300-24X2C Stackable L3 10G Switch

I. Product Overview

QSFPTEK S7300-24X2C is a new generation of full 10GE TOR switch, oriented for high-performance computing, data center and high-end campuses. It adopts our most advanced hardware architecture designs, supporting up to 2.56Tbps switching capacity in 1U and 24x 10GE SFP+ ports + 2x 100GE/40GE QSFP28 ports.

Developed on the basis of BDROS software platform with its own independent intellectual property rights, S7300-24X2C provides high-performance L2/L3/L4 wire speed switching capacity by integrating services such as IPv6, VPN, network security, flow analysis, virtualization, with high reliable techniques including continuous forwarding, graceful restarting and loop network protection, all which works efficiency withing the S7300-24X2C fabric for guaranteed maximum runtime. Besides, supporting the “GreenTouch” architecture and “Smart@CHIP”, this energy-saving switch has a low power consumption of200W.

II. Product Characteristics

Carrier-Level Aggregation Layer-3 Ethernet Switch Innovative BVSS (Virtual Switch System) Stacking

  • virtualize multiple physical devices into one. The performance, reliability and management capabilities of the virtual system combine to outperform that of individual physical devices.

  • Improved Performance: BVSS makes full use of each link in the physical device cluster, which avoids STP blocking on links and protects the original link to the maximum.

  • High Reliability: Based on the advanced distribution mechanism and efficient cross-physical link aggregation function, the logic control plane, service control plane and service data plane are separated. Thus, the device can support continuous layer3 routing forwarding, avoiding service interruption as a result of a single point of failure.

  • Easy Management: BVSS realizes single IP management, greatly improving the networking efficiency and lowering operating costs.
    Rich Data Center Services

  • Supports BVSS, which can virtualize multiple physical devices into a single logical element. The virtualized system is superior to the independent physical device in performance, reliability, flexibility and management.

  • Doubled Performance: The virtualized system makes the best use of each link in the device and avoids blocking of STP to the links.

  • High-reliability: Based on the advanced distributed processing technique and the efficient function of cross-physical device link aggregation, , the S7300-24X2C provides non-stop layer-3 routing forwarding and avoids single points of failure.

  • Flexibility : The virtual cluster function allows the distance of a cluster system to expand over up to 80KM, breaking the geographic restrictions of traditional cluster techniques.

  • Easy Management: The whole virtual system realizes single IP unified management and simplifies the management of network device and network topology.
    Security+

  • Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions.

  • Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+.

  • Supports storm/multicast/unicast limits.

  • ensuring normal running conditions of the equipment when deployed in harsh network conditions.

  • Supports perfect ring detection mechanisms, ensuring long-term network performance stability.

  • Supports port isolation within the same VLAN, DHCP-Snooping, and IP + MAC + Port binding.
    Versatile IPv6 Solution

  • Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc.

  • Supports Ping, Traceroute, Telnet, SSH, ACL based on IPv6.

  • Supports MLD, MLD Snooping, IPv6 static routing, RIPng, OSPFv3 and BGP4+, etc.

  • Supports IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP.

  • Supports IPv4 transiting to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.
    Data Center Level High-reliability

  • Adopts HPS (Hitless Protection System). The key components of he S7300-24X2C such as the power system and the fan system supports redundancy in design. All system modules support hot-swap and seamless switching without need of manual intervention.

  • Supports redundancy protection mechanisms such as STP/RSTP/MSTP protocol, VRRP protocol, ring network protection, dual uplink active/standby link protection and LACP link aggregation.

  • Supports ISSU (In-Service Software Upgrade), guaranteeing non-stop forwarding of service data while the system is upgrading.

  • Supports BFD and realizes fault detection and service recovery in seconds through linking with layer-2 or layer-3 protocol.

  • Has perfect Ethernet OAM, 802.3ah, 802.1ag and ITU-Y.1731 which can monitor the network operating state in real time and rapidly detect and locate the malfunction.

  • High Reliability (99.999%): The MTTR of the S7300-24X2C is 50ms, satisfying the requirement for reliable delivery of carrier-level service.

III. Product Specifications

Item S7300-24X2C
Interface 24x 10GE/GE SFP+ ports,

2x 100GE/40GE QSFP28 ports

Console| 1 RJ45 console, 1 MGMT
Switching capacity| 800Gbps
Forwarding rate| 600Mpps
Chassis Dimensions(HxWxD)(mm)| 44x440x350
Chassis Weight(KG)(empty)| 7.1
Package Dimensions(HxWxD)(mm)| 94x576x448
Package Weight(KG)| 8.3
Power consumption no-load| 45W
Power consumption full-load| 70W
Power supply(hot-swap) AC: 100V-240V 50Hz±10%| 2 (1+1 Redundancy) Hot-swap
Power status monitoring| Support
Total output BTU (1000BTU/H=293W)| 238.91
Fan number| 4 (3+1 Redundancy)
Noise@25°C(dBA)| 57
MTBF(H)| >200,000
Forwarding mode| Store-forward
Flash (MB)| 64
DRAM (MB)| 1024
MAC| 32K
Buffer size(MB)| 4
Routing table IPv4| 8K
Routing table Ipv6| 4K
Total SVI| 1K

IV. Features

VLAN| ▶  4K Active VLAN
▶  QinQ & Selective QinQ
▶  GVRP, Private VLAN
---|---
Spanning Tree| ▶  802.1D (STP)
▶  802.1W(RSTP)and 802.1S(MSTP)
▶  BPDU guard, root guard and loopback guard
Multicast| ▶ PIM-SM, PIM-DM
▶  IGMP v1/v2/v3
▶  IGMP Snooping
▶  IGMP Fast Leave
▶  MVR, IGMP filter
IPv4| ▶  Static routing, RIP v1/v2,
▶  OSPF, BGP, PBR, ECMP
▶  BFD for OSPF, BGP
IPv6| ▶  ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet
▶  IPv6 neighbor discovery, Path MTU discovery
▶  MLD snooping
▶  IPv6 Static Routing, RIPng, OSPFv3, BGP4+
▶  Manual tunnel, ISATAP tunnel, 6 to 4 tunnel
MPLS| ▶  Multi-VRF
QoS| ▶  CAR, HQoS, MAC/IP/TCP/UDP/VLAN/COS/DSCP/TOS based QoS
▶  802.1P/DSCP priority re-labeling, SP, WRR, and “SP+WRR”, Tail-Drop
▶  WRED, flow monitoring and traffic shaping
Security| ▶  Port isolation, Port security, and “IP + MAC+ port” binding, MAC sticky
▶  DHCP Snooping and option 82, DAI & IP source guard, PPPoE+,
▶  IEEE 802.1x, Radius and BDTacacs+L2/L3/L4 ACL flow identification and filtration Anti-attack from
▶  DDoS, TCP’s SYN Flood, UDP Flood, etc. Broadcast/multicast/unknown
▶  unicast storm-control
▶  MD5, SHA-256, RSA-1024, AES256, etc.
Reliability| ▶  Static/LACP link aggregation,
▶  Interface backup
▶  BVSS virtual-stacking
▶  EAPS and ERPS
▶  URPF, LLDP
▶  ISSU
▶  VRRP
▶  1+1 power backup
Management| ▶  Console, Telnet, SSH v1/2, HTTP/HTTPS
▶  SNMP v1/v2/v3, RMON
▶  TFTP, FTP, SFTP
▶  NTP, SPAN, RSPAN
Environment| ▶  Operating temperature/humidity:0℃ -50℃ ,10%-90% non- condensing
▶  Storage temperature/humidity:-20℃ -70℃ , 5%-95% non-condensing
Certification| Ø  CE, FCC, ROHS
Feature| S7300-24X2C
---|---
Stackability| 8
MAC address Capacity| 32K
Jumbo frame| 16K
ARP Capacity| 24567
NDP Capacity| 11468
VLAN IDs| 4K
MSTP Instance Num| 128
QoS ipv4 flow entry| ifp 2686,efp 768
QoS ipv6 flow entry| ifp 960,efp 383
IPv4 ACL| ifp 2686,efp 768
IPv6 ACL| ifp 960,
Item| Description
---|---
S7300-24X2C| Ethernet routing optical switch with 24x 10GE ports+ 2x 100G ports (1x console port, 1x out band port, 1x USB2.0, 24x 10GE/GE SFP+ ports, 2x 100GE/40GE QSFP28 ports (can expand to 4x 25GE or 4x 10GE ports); 2 hot- swap power slots with dual AC220 power supplies; 4 fans; 1U, 19-inch rack- mounted installation)

sales@qsfptek.com
www.qsfptek.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

QSFPTEK User Manuals

Related Manuals