OUKITEL C57 Pro Smart Phone User Manual

C57 Pro

User Manual

Website: oukitel.com

1. Headphone jack
2. Front camera
3. Receiver
4. MIC hole
5. TPYE – C interface
6. horn hole

Accessories

Charger      TYPE-C       Leather case

Battery

C57 Pro includes an internal battery. You can track your battery status with the icon showed on the top right of the screen.

5 W Schnellladung

Warning

• Use only OUKITEL-approved batteries specifically designed for you phone.
• Incompatible batteries can cause serious injuries or damage to your phone.
• Never place batteries or phones on or in heating devices such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.

Please tear off the battery protective film before starting!

1. flash
2. Main camera
3. Fingerprint Scanner
4. Volume+
5. Volume –
6. Power key

(1) How to insert the card

To make sure your pad is able to make calls, insert the SIM card in the following order.

• Find the button on the back cover of the phone and open the battery cover.

(1)

• Then place the sim card in the correct direction and insert the card slot in the direction of the arrow

(2)

(2) How to boot

Non-removable battery
Press the power button for 3-5 seconds to boot

(3) How to send SMS, MMS

SMS

• Open the SMS app
• Select New Information
• Enter a phone number or browse your contacts
• Select Edit Information and enter your text
• Send

MMS-video

• When writing a text message
• Select images, videos, or other files you want to add, even you can take a new picture or video right away
• Selecting or sending

(4) Language switching settings

• Main menu–settings system–language and input method Language and input method–language–language adding
• Select the language you need, the system will automatically
• jump back to the language interface
• Select the icon after the language bar and drag it to the first one

(5) SAR

• The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg
• In line with the requirements of the national standard

EN62209-1:2016; EN 62209-2:2010; EN 62479:2010; EN 50360:2017; EN 50566:2017;

(6) Safety – In order to ensure safety during use of the product , you

must strictly abide by the following rules

• The pad should be at least 15cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
• If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
• Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, Which may result in internal short-circuit and overheating of the battery.
• The company does not bear responsibility for accidents caused by non-standard related charging equipment.

If you want to read the full CE compliance, please check this link: http://www.oukitel.com

(7) Maintenance

• Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
• Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other
• Please avoid dropping, knocking, or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water and mild soap.
• Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

This device complies with part 15 of the FCC Rules . Operation is subject to the condition that this device does not cause harmful interference
Any changes or modifications not expressly approved by the party responsible for compliance could void the uer’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions , may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

FCC ID : 2ANMU-057

Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Smart Phone
Model number: C57 Pro

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
3. The product shall only be connected to a USB interface of version USB 2.0
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. The plug considered as disconnect device of adapter
6. The device complies with RF specifications when the device used at 0mm form your body

www.oukitel.com

Android is a trademark of Google LLC.

Manufacturer Name: ShenZhen YunJi Intelligent Technology CO., LTD
ManufacturerAddress:202, Building A2, Silicon Valley Power Intelligent Terminal
Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street,
Longhua District, Shenzhen China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>