Eltako DL2-TK2L-N-50mA DALI-2 2 Channel Pushbutton Coupler Power Supply Instructions

Eltako DL2-TK2L-N-50mA DALI-2 2-Channel Pushbutton Coupler Power Supply

Product Specifications

• Model: DL2-TK2L-N-50mA
• Type : DALI-2 2-channel pushbutton coupler + power supply
• Part Number : 33 000 029 – 1
• Maximum Current : 50mA

Product Usage Instructions

Installation

1. Ensure that only skilled electricians install this equipment to avoid the risk of fire or electric shock.
2. Follow the provided installation guide carefully.
3. Make sure to disconnect the power before installation.
4. Properly ground the equipment to prevent electrical hazards.

Connection

1. Connect the power supply according to the specified voltage requirements.
2. Connect the pushbutton coupler using the appropriate wiring diagram.
3. Double-check all connections for accuracy before applying power.

Operation

1. After installation and connection, test the functionality of the pushbutton coupler.
2. Ensure all buttons and channels are working correctly.
3. Refer to the user manual for programming and customization options.

INSTRUCTION

Only skilled electricians may install this electrical equipment otherwise there is the risk of fire or electric shock!

• Temperature at mounting location : -20°C up to +50°C.
• Storage temperature: -25°C up to +70°C.
• Relative humidity: annual average value <75%

Compact DALI-2 control module with 2 freely programmable switching inputs. For installation. 59 mm long, 33 mm wide, 15 mm deep. Protection class: IP 20. DALI2 certified. DALI2 is the newest generation of the DALI standard with an extended range of functions. DALI2 devices also include all previous DALI functions and are therefore backward compatible. Compact DALI-2 control module with 2 switching inputs for 230 V AC. With an integrated DALI bus supply (50 mA), an additional bus supply may not be connected. Galvanic isolation between switching input and DALI interface. Multi-master capable. Integrated DALI-2 Application Controller. Individual DALI commands-effective range and switching functions can be assigned to each input. In addition to the standard DALI commands, the application controller also enables DALI DT8 TC and RGB(W) control. Easy integration through two DALI2 pushbutton instances. Supports short button press, and long button press (with repetition for dimming and toggle. In addition to buttons, also suitable for switches. Alternative button function, each of the inputs can also be assigned a second function, which can be activated/deactivated via a scene command on the DALI bus. Sequences, macros, and other functions are available in the Application Controller. Simple configuration via a LUNATONE DALI interface and DALI Cockpit software tool. The polarity of the output voltage is visible on the housing (DA+, DA-).

Application and function

• The DL2-TK2L-N-50mA serves as a universal module for controlling DALI-compatible lights.
• The function of each switching input can be set individually.
• Like other Lunatone control devices, the settings can be made using the DALI Cockpit software tool. In principle, a distinction is made between the application controller and the DALI-2 instances. The Application Controller leads to direct DALI control commands that are immediately executed by the DALI drivers. The DALI-2 instances generate event messages that are interpreted and further processed by higher-level control units (WAGO, Beckhoff, LUNATONE DALI-2KNX Gateway). Application controllers and instances can be active at the same time.

Delivery condition
When delivered, a basic configuration is already implemented (factory settings). If necessary, this can be changed and adapted to the current application.

Technical data

• Maximum DALI output current 250 mA

Plug-in terminals

• Max. wire cross section 1.5 mm2

Manuals and documents in further languages:

https://eltako.com/redirect/DL2-TK2L-N-50mA

FAQ

Frequently Asked Questions

• Q: Can I install this product without professional help?
  • A: No, only skilled electricians should install this electrical equipment to prevent safety hazards.
• Q: What should I do if the product malfunctions after installation?
  • A: In case of malfunction, disconnect power immediately and contact a qualified technician for assistance.
• Q: Can I use this product with other DALI-2 compatible devices?
  • A: Yes, this product is designed to work with DALI-2 compatible devices for enhanced functionality.

Must be kept for later use

• ELTAKO GmbH
• D-70736 Fellbach
• Technical Support English:
• +49 711 943 500 25
• technical-support@eltako.de
• eltako.com

49/2023 Subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>