MEAN WELL GC30U 30W AC-DC Power Adaptor with Charger Function Instruction Manual
- June 4, 2024
- MEAN WELL
Table of Contents
16.8 ~ 30W AC-DC Power Adaptor with Charger Function
GC30U series
User’s Manual Video
■ Features
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)(Note.1)
- Universal AC input / Full range
- With USA type 6FT power cord (2pin)
- Class II power (without earth pin)
- No load power consumption <1.0W
- Constant current and voltage(CC,CV mode)
- Suitable for continue load
- For high surge current equipment
- Protections: Short circuit / Overload / Over voltage / Over temp.
- 2 colors LED indicate for charging status
- Fully enclosed plastic case
- High reliability
- Approvals: UL / CUL / EAC / CB / FCC
- 2 years warranty
■ GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
SPECIFICATION
ORDER NO.| GC30U-0P1J| GC30U-1P1J| GC30U-11P1J| GC30U-
2P1J| GC30U-4P1J| GC30U-5P1J| GC30U-6P1J
---|---|---|---|---|---|---|---
OUTPUT| SAFETY MODEL NO.| GC30U-0| GC30U-1| GC30U-11| GC30U-2|
GC30U-4| GC30U-5| GC30U-6
DC VOLTAGE SET AT Note.3| 4.2V| 5.6V| 7.2V| 8.4V| 14.3V| 16.8V| 28.6V
RATED CURRENT| 4A| 3.99A| 3A| 3A| 2.09A| 1.6A| 1.04A
CURRENT RANGE| 0 ~ 4A| 0 ~ 3.99A| 0 ~ 3A| 0 ~3A| 0 ~ 2.09A| 0 ~ 1.6A| 0
~ 1.04A
RATED POWER| 16.8W| 22.38W| 21.6W| 25.2W| 30W| 27W| 30W
RIPPLE & NOISE (max.) Note.4| 50mVp-p| 50mVp-p| 80mVp-p| 80mVp-p|
100mVp-p| 100mVp-p| 150mVp-p
CHARGING VOLTAGE RANGE Note.5| 3.6 ~ 4.4V| 5 ~ 5.8V| 6.5 ~ 7.5V| 7.7 ~
8.6V| 13.5 ~ 14.5V| 16 ~ 17V| 27.1 ~ 28.8V
LINE REGULATION Note.6| ±1.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LED INDICATOR| Green LED ON < 100mA, Red LED ON > 250mA
SETUP, RISE, HOLD UP TIME| 200ms, 50ms, 16ms at full load
INPUT| VOLTAGE RANGE| 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 55%| 70%| 74%| 76%| 78%| 78%| 80%
AC CURRENT| 0.7A /100VAC; 0.35A/230VAC
INRUSH CURRENT (max.)| 40A/230VAC
LEAKAGE CURRENT(max.)| 0.25mA /240VAC
PROTECTION| OVERLOAD| 90 ~ 110% Constant current mode and over 300%
pulsing mode
Protection type : Constant current limiting, recovers automatically after
fault condition is removed
OVER VOLTAGE| 110 ~ 135% rated output voltage
Protection type : Clamp by zener diode
OVER TEMPERATURE| IC1_Tj > 130℃
Protection type : Shut down o/p voltage, recovers automatically after
temperature goes down
ENVIRONMENT| WORKING TEMP.| 0 ~ +50℃(Refer “Derating Curve”)
**| WORKING HUMIDITY| 20% ~ 90% RH non-condensing
**| STORAGE TEMP., HUMIDITY| -20 ~ +85℃, 10 ~ 95% RH
**| TEMP. COEFFICIENT| ±0.03% / ℃ (0 ~ 50℃)
**| VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each
along X, Y, Z axes
SAFETY & EMC| SAFETY STANDARDS| UL62368-1, CSA22.2, EAC TP TC 004
approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY| Compliance to EAC TP TC 020
OTHERS| DIMENSION| 1086736mm (LWH)
PACKING| 405g; 36pcs / 16.5kg / CARTON
CONNECTOR| PLUG| Standard type P1J: 2.1ψ 5.5ψ 11mm, tuning fork
type center positive for stock ; Other type available by customer requested
CABLE| Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only
for stock ; Other type available by customer requested
NOTE|
- Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- All parameters are specified at 115VAC input, rated load, 25ºC 70% RH ambient.
- DC voltage: The output voltage set at point measure by plug terminal & 0% load.
- Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1 uf & 47uf capacitor.
- Output charging voltage range is measured from 0% to 100% rated load.
- Line regulation is measured from low line to high line at rated load.
Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
■ Mechanical Specification
Unit:mm
■ Charging Curve
Suitable for lead-acid batteries (flooded,Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese)
■ LED Display
| LED Status | Load Condition |
|---|---|
| Red | Charging |
| Green | Float Charging |
■ Plug Assignment
Standard plug: P1J (option)
P1J
P/N| OUTPUT
CENTER| +
■ Derating Curve
■ Static Characteristics
File Name:GC30U-SPEC 2022-04-15