MEAN WELL GC30B 30W Power Adaptor with Charging Function Instruction Manual

: June 4, 2024
: MEAN WELL

Table of Contents

GC30B series
■ Features
■ GTIN CODE
SPECIFICATION
■ Mechanical Specification
■ Charging Curve
■ LED Display
■ Plug Assignment
■ Derating Curve
■ Static Characteristics
Read User Manual Online (PDF format)
Download This Manual (PDF format)

16.8 ~ 30W Power Adaptor with Charging Function

GC30B series

MEAN WELL GC30B 30W Power Adaptor with Charging A1

User’s Manual Video

■ Features

Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)(Note.1)
Universal AC input / Full range
2 pole AC Inlet IEC320-C8
Class II power (without earth pin)
No load power consumption <1.0W
Constant current and voltage(CC,CV mode)
Suitable for continue load
For high surge current equipment
Protections: Short circuit / Overload / Over voltage / Over temp.
2 colors LED indicate for charging status
Fully enclosed plastic case
High reliability
Approvals: UL / CUL / TUV / EAC / CB / FCC / CE / UKCA
2 years warranty

■ GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

MEAN WELL GC30B 30W Power Adaptor with Charging certi

SPECIFICATION

ORDER NO.| GC30B-0P1J| GC30B-1P1J| GC30B-11P1J| GC30B- 2P1J| GC30B-4P1J| GC30B-5P1J| GC30B-6P1J
---|---|---|---|---|---|---|---
OUTPUT| SAFETY MODEL NO.| GC30B-0| GC30B-1| GC30B-11| GC30B-2| GC30B-4| GC30B-5| GC30B-6
DC VOLTAGE SET AT Note.3| 4.2V| 5.6V| 7.2V| 8.4V| 14.3V| 16.8V| 28.6V
RATED CURRENT| 4A| 3.99A| 3A| 3A| 2.09A| 1.6A| 1.04A
CURRENT RANGE| 0 ~ 4A| 0 ~ 3.99A| 0 ~ 3A| 0 ~3A| 0 ~ 2.09A| 0 ~ 1.6A| 0 ~ 1.04A
RATED POWER| 16.8W| 22.38W| 21.6W| 25.2W| 30W| 27W| 30W
RIPPLE & NOISE (max.) Note.4| 50mVp-p| 50mVp-p| 80mVp-p| 80mVp-p| 100mVp-p| 100mVp-p| 150mVp-p
CHARGING VOLTAGE RANGE Note.5| 3.6 ~ 4.4V| 5 ~ 5.8V| 6.5 ~ 7.5V| 7.7 ~ 8.6V| 13.5 ~ 14.5V| 16 ~ 17V| 27.1 ~ 28.8V
LINE REGULATION Note.6| ±1.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LED INDICATOR| Green LED ON < 100mA, Red LED ON > 250mA
SETUP, RISE, HOLD UP TIME| 200ms, 50ms, 16ms at full load
INPUT| VOLTAGE RANGE| 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 55%| 70%| 74%| 76%| 78%| 78%| 80%
AC CURRENT| 0.7A /100VAC; 0.35A/230VAC
INRUSH CURRENT (max.)| 40A/230VAC
LEAKAGE CURRENT(max.)| 0.25mA /240VAC
PROTECTION| OVERLOAD| 90 ~ 110% Constant current mode and over 300% pulsing mode
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 110 ~ 135% rated output voltage
Protection type : Clamp by zener diode
OVER TEMPERATURE| IC1_Tj > 130℃
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT| WORKING TEMP.| 0 ~ +50℃(Refer to output load derating curve)
**| WORKING HUMIDITY| 20% ~ 90% RH non-condensing
**| STORAGE TEMP., HUMIDITY| -20 ~ +85℃, 10 ~ 95% RH
**| TEMP. COEFFICIENT| ±0.03% / ℃ (0 ~ 50℃)
**| VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC| SAFETY STANDARDS| UL62368-1, CSA22.2, BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55014-1 class B, FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020
OTHERS| DIMENSION| 1086736mm (LWH)
PACKING| 309g; 54pcs / 19kg / CARTON
CONNECTOR| PLUG| Standard type P1J: 2.1ψ 5.5ψ 11mm, tuning fork type center positive for stock ; Other type available by customer requested
CABLE| Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
NOTE|

Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
All parameters are specified at 230VAC input, rated load, 25ºC 70% RH ambient.
DC voltage: The output voltage set at point measure by plug terminal & 0% load.
Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1 uf & 47uf capacitor.
Output charging voltage range is measured from 0% to 100% rated load.
Line regulation is measured from low line to high line at rated load.

Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx