MEAN WELL XLN-60 series LED Driver Owner’s Manual

XLN-60 series LED Driver

“`html

Product Information

Specifications

• Model: XLN-60 series
• Power: 60W
• Input Voltage: 110-305VAC
• Output Voltage Range: 12V, 24V, 48V
• Output Current: 5A, 2.5A, 1.25A
• IP Rating: IP67

Product Usage Instructions

Installation

1. Ensure the input voltage matches the specified range
   (110-305VAC).

2. Connect the output wires to your LED lighting system, ensuring
   correct polarity.

3. Mount the LED driver in a well-ventilated area away from direct
   sunlight or moisture.

Operation

1. Apply power to the LED driver within the specified voltage
   range (12V, 24V, or 48V).

2. The LED driver will provide constant voltage output to your LED
   lights.

3. Monitor the load and ensure it does not exceed the rated power
   of 60W.

Maintenance

1. Regularly check for any signs of damage or overheating.
2. Clean the LED driver with a dry cloth to prevent dust
   buildup.

FAQ (Frequently Asked Questions)

Q: What is the IP rating of this LED driver?

A: The LED driver has an IP67 rating,
indicating it is dust-tight and can withstand immersion in water up
to 1 meter depth for 30 minutes.

Q: What is the default current for the XLN-60-12 model?

A: The default current for the XLN-60-12 model
is 5A.

Q: How should I handle inrush current during installation?

A: Inrush current should be managed by ensuring
proper wiring connections and using appropriate circuit protection
devices.

“`

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series
User’s Manual

IP67

2

DC.220V

II

File Name:XLN-60-SPEC 2023-10-19

60W Constant Voltage LED Driver

XLN-60 series

SPECIFICATION

MODEL

XLN-60-12-

XLN-60-24-

XLN-60-48-

DC VOLTAGE RANGE

12V

24V

48V

NO LOAD VOLTAGE

12V

24V

48V

OUTPUT

DEFAULT CURRENT RATED POWER SETUP,RISE TIME

5A

2.5A

60W

60W

800ms,150ms/230VAC ,1000ms,150ms/115VAC

1.25A 60W

VOLTAGE RANGE

110~305VAC

155~431VDC

FREQUENCY RANGE POWER FACTOR

47 ~ 63Hz
PF0.95/230VAC,PF0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

INPUT

TOTAL HARMONIC DISTORTION EFFICIENCY(Typ.)
AC CURRENT
INRUSH CURRENT

THD< 20%(@load 50%/230VAC; @load 75%/277VAC) THD<10%@load 100%/230VAC (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

86%

87%

88%

0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC

COLD START 15A(twidth=310s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. NO. of PSUs on 16A CIRCUIT BREAKER

25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

STANDBY POWER CONSUMPTION
OVERLOAD

Standby power consumption<0.5W(Dimming OFF, only for standard version B/BD2-type)
105~150% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed.

PROTECTION

SHORT CIRCUIT OVER VOLTAGE

Hiccup mode, recovers automatically after fault condition is removed

14-17V

27-35V

Shut down output voltagere-power on to recover

56-63V

OVER TEMPERATURE Shut down output voltagerecovers automatically after fault condition is removed

WORKING TEMP.

Tcase=-25~90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=90

WORKING HUMIDITY

20 ~ 90% RH non-condensing

ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/ (0 ~ 50)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

OPERATING ALTITUDE 2000 meters

SAFETY STANDARDS

ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations; BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004 approved;

DALI STANDARDS

Comply with IEC62386-101, 102, 207

SAFETY&EMC OTHERS

WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
EMC IMMUNITY FLICKER Note.6 MTBF DIMENSION

I/P-O/P:3.75KVAC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C(@load 50%) ; BS EN/EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV), EAC TP TC 020 PstLM 1, SVM 0.4 xx K hrs min. Telcordia SR-332 (Bellcore) xx Khrs min. MIL-HDBK-217F (25)
141.54932mm(LWH)

PACKING

X.XXKg ; XXpcs/XXKg/X.XXCUFT

NOTE

, https://www.meanwell.com/serviceDisclaimer.aspx

File Name:XLN-60-SPEC 2023-10-19

60W Multiple-Stage Constant Power LED Driver

XLN-60 series

SPECIFICATION

MODEL

XLN-60-H-

OUTPUT

OPEN CIRCUIT VOLTAGE 60V

DEFAULT CURRENT

1400mA

CURRENT ADJ. RANGE (BY DIP SWITCH OR NFC)

0.9~1.7A

CONSTANT CURRENT REGION

9~54V

RATED POWER

60W

CURRENT RIPPLE Note5 <4%

CURRENT TOLERANCE ±5%

DIMMING RANGE

0~100%

SETUP,RISE TIME Note9 800ms,100ms/230VAC ,1000ms,100ms/115VAC

VOLTAGE RANGE

110~305VAC

155~431VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF0.95/230VAC,PF0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load 50%/230VAC; @load 75%/277VAC) THD<10%@load 100%/230VAC (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

INPUT

EFFICIENCY(Typ.) Note4 90%

AC CURRENT

0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC

INRUSH CURRENT

COLD START 15A(twidth=310s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. NO. of PSUs on 16A CIRCUIT BREAKER

25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

STANDBY POWER CONSUMPTION Note6

Standby power consumption<0.5W (Dimming off, only for standard version B/DA2-type)

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

PROTECTION OVER TEMPERATURE
WORKING TEMP. MAX. CASE TEMP.

Da2 type: Stage 1: Derating to 75% loading; stage2: Derating to 50% loading; Recovers automatically after fault condition is removed
Blank & B type: Derating to lowest output level, Recovers automatically after fault condition is removed Tcase=-25~90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section) Tcase=90

WORKING HUMIDITY

20 ~ 90% RH non-condensing

ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/ (0 ~ 50)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

OPERATING ALTITUDE SAFETY STANDARDS DALI STANDARDS

2000 meters
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations; BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004 approved;
Comply with IEC62386-101, 102, 207

WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY&EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH

EMC EMISSION

Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C(@load 50%) ; BS EN/EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020

OTHERS

EMC IMMUNITY
FLICKER Note.9 MTBF DIMENSION

Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV), EAC TP TC 020 PstLM 1, SVM 0.4
xx K hrs min. Telcordia SR-332 (Bellcore) xx Khrs min. MIL-HDBK-217F (25)
141.54932mm (LWH)

PACKING

X.XXKg ; XXpcs/XXKg/X.XXCUFT

NOTE

, https://www.meanwell.com/serviceDisclaimer.aspx

File Name:XLN-60-SPEC 2023-10-19

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

BLOCK DIAGRAM

EMI FILTER

I/P

&

RECTIFIERS

POWER SWITCHING

RECTIFIERS &
FILTER

DC to DC

+V -V

O.L.P.

PWM&PFC CONTROL

O.T.P.

DRIVING METHODS OF LED MODULE

– XLN-60-H
For 60W application

60V 55V 50V 45V 40V 35V 30V 25V 20V 15V 10V
5V 0V
600mA

900mA, 54V 1050mA, 54V 1400mA, 43V 1700mA, 36V

900mA, 9V

1700mA, 9V

800mA 1000mA 1200mA 1400mA 1600mA 1800mA

CONSTANT POWER TABLE
XLN-60-H is a multiple-stage constant power driver, selection of output current through NFC setting is exhibited below.

CURRENT & VOLTAGE LIMIT
DETECTION CIRCUIT

DA+/PUSH DA-/N

Vo

Io

9~54V 900mA

9~54V 1050mA

9~50V 1200mA

9~46V 1300mA

9~43V 1400mA(default)

9~40V 1500mA

9~38V 1600mA

9~36V 1700mA

Note: 1.The operating voltage range which show on this table is recommend to use.

File Name:XLN-60-SPEC 2023-10-19

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

NFC Function Description
1. The output current of the NFC Mode LED driver can be adjusted using NFC via the mobile APP Operation Instruction Compatible phone Install an NFC- compatible smart mobile device or phone with AndroidTM 4.1 or IOS12 updates.Steps for setting output current via NFC
1. Download Meanwell APP on mobile device or mobile phone, and enable NFC function. 2. Check the NFC antenna position of the mobile phone please. 3. Enter Meanwell APP ->Top left menu ­Installation Manual/APP->PowerNFC approach the LED driver NFC sensing position and perform sensing. 4. APP displays the functional parameters, and the relevant parameters are modified as required. 5. Tap the APP write button and quickly move the phone antenna close to the NFC sensing position of the LED driver. 6. The write completes when the mobile phone displays”Success”.
APPFunction Description
APP Interface:

Model name Adjustable Output Current NFC setting password
Factory setting Setting to LED Driver

Output Current Level
GTIN

To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: MEAN WELL on

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

DIMMING OPERATION
B type

3 in 1 dimming function
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)

Vo+ +

Vo-

–

DIM+ +

Additive Voltage DIM-

“DO NOT connect “DIM- to Vo-”

Output current (%)

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0% 0V 1V

2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage

Vo+ +

Vo-

–

DIM+

Additive PWM signal DIM-

“DO NOT connect “DIM- to Vo-”

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input

Applying additive resistance: 0~100k

100%

Output current (%)

Vo+ +
VoDIM+

90%

80%

70%

–

60%

50%

40%
Additive Resistance
30%

DIM-

20%

“DO NOT connect “DIM- to Vo-”

10%

0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantity for synchronized dimming operatio)n

Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.

Dimming input: Additive resistance

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.

File Name:XLN-60-SPEC 2023-10-19

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

DIMMING OPERATION

DA2 type (DALI-2 digital dimming function)
Input wiring diagram
DA-/N DA+/PUSH

AC/L

-V

AC/N

+V

PUSH dimming (primary side)
·The factory default dimming level is at 100%. ·If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver. ·Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button. ·The maximum length of the cable from the push button to the last driver is 20 meters.

Action Short Push Double Click Long Push

Action duration Function

0.1~1s

Turn ON-OFF the driver

Click twice in 1.5s Set up the dimming level to 100%

1.5~10s

Every Long Push changes the dimming direction, dimming up or down

PWM OUTPUT DIMMING PRINCIPLE
For 12V/24V/48V PWM style output dimming Dimming is achieved by varying the duty cycle of the output current.
Output DC current ON

Io=0A

OFF TON
T

TON

Duty cycle(%) =

×100%

T

Output PWM frequency : 4kHz for B-Type fixed (Typ.) 3.2kHz for DA2-Type fixed (Typ.)

File Name:XLN-60-SPEC 2023-10-19

LOAD (%)

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

OUTPUT LOAD vs TEMPERATURE

100

80

230 VAC

60

110VAC

40

20

-25 -15

0

15

30

40

50 60

70 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta ()
STATIC CHARACTERISTIC

LOAD (%)

100 90 80 70 60 50 40
100 115 130 150 170 190 210 230 250 270 290 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.

LOAD (%)

100 80 60 40 20

-25

0

20

45

55

65

75 85 90 (HORIZONTAL)

Tcase ()

LIFE TIME

LIFETIME(Kh)

120

100

80

60

40

20

0

25

35

45

55

65

75

85

Tcase( )

File Name:XLN-60-SPEC 2023-10-19

THD

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

TOTAL HARMONIC DISTORTION (THD)

Tcase at 85

16

14

12

10

8

110VAC

230VAC

6

277VAC

4

2

0

50%

60%

70%

80%

90%

100%

LOAD (1400mA)

POWER FACTOR (PF) CHARACTERISTIC
Tcase at 85

THD

16

14

12

10

8

110VAC

230VAC

6

277VAC

4

2

0

50%

60%

70%

80%

90%

100%

LOAD (1700mA)

PF

1

0.95

0.9

0.85

110VAC

230VAC

0.8

277VAC

0.75

0.7

50%

60%

70%

80%

90%

100%

PF

1

0.95

0.9

0.85

110VAC

230VAC

0.8

277VAC

0.75

0.7

50%

60%

70%

80%

90%

100%

LOAD (1400mA)
EFFICIENCY vs LOAD
XLN-60 series possess superior working efficiency that up to 90% can be reached in field applications. Tcase at 85

LOAD (1700mA)

EFFICIENCY (%)

95 90 85 80 75 70 65 60 55 50
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

110VAC 230VAC 277VAC

LOAD (1400mA)

EFFICIENCY (%)

95 90 85 80 75 70 65 60 55 50
10%

20%

30%

40%

50%

60%

70%

80%

110VAC 230VAC 277VAC
90% 100%

LOAD (1700mA)

File Name:XLN-60-SPEC 2023-10-19

60W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLN-60 series

MECHANICAL SPECIFICATION

150

49 mm
4

AC/L(Brown) AC/N(Blue)

SJOW 17AWG×2C

150

4

2-3.6

49 mm
4

AC/L(Brown) AC/N(Blue)

SJOW 17AWG×2C

A2
180

DA-/N(Pink)
DA+/PUSH(Purple) AC/L(Brown) AC/N(Blue)

UL2517(18AWG*2) SJOW 17AWG×2C

49 mm
4

4

2-3.6

4

2-3.6

141.5
110 mm
Current adjustable
141.5
Current adjustable
141.5
Current adjustable

Case No.XLN-60 Unit:mm
150 4

4

SJOW 17AWG×2C

-V(Black) +V(Red)

180 4

4

UL2517(18AWG*2)
SJOW 17AWG×2C 150

DIM-(Pink)
DIM+(Purple) -V(Black) +V(Red)

150 4

SJOW 17AWG×2C

-V(Black) +V(Red)

4 32

Current adjustable

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

File Name:XLN-60-SPEC 2023-10-19

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>