BULT AUDIO LiveBuds User Manual

**BULT AUDIO LiveBuds User Manual

**

Please refer to the safety precautions mentioned on the last page of this manual before operating this device.

Pairing for the first time

Step 1 : Make sure the product is fully charged.
Step 2 : Open the case with earbuds inside and wait for 3-4 seconds. you will see blue LED light will start ashing on the left earbud and red & blue LED light on the right earbud. Now, they are ready to connect with your device.
Step 3 : Turn on the bluetooth on your device & scan to you see ”Boult Audio Livebuds L”.
Step 4: Click on “Boult Audio Livebuds L” to pair your device with the earbuds. Once your device is paired successfully with the earbuds, blue LED light will start flashing slowly. Now you can enjoy your music/calls.

Auto-pairing Mode (Re-pairing with your device)

Step 1 : Turn on the bluetooth on your same device.
Step 2 : Open the case with earbuds inside and wait for 3-4 seconds. You will see a blue LED light on the left earbud and red & blue LED light on the right earbud. Earbuds will connect to your same device automatically and blue LED light will start ashing slowly.
Step 3 : If the earbuds are not able to connect automatically with the same device, then charge the case with the earbuds inside and the lid closed. Open the case and bluetooth settings on your device, scan and connect to “Boult Audio Livebuds L”.
Now you can enjoy your music/calls.
Step 4:  If both earbuds ashes red and blue LED light, then place both earbuds back in the charging case and use them after few seconds.

Product Introduction

Using as a Mono Headset

Step 1 : Open the case with earbuds inside.
Step 2: Take one earbud which you want to use as a mono headset and close the case.
Step 3: Red & blue LED light will start ashing in few seconds and will be ready to connect to your bluetooth device. If not, close the case with both earbuds inside, charge the case and repeat all steps.
Step 4 : If both earbuds need to be used as mono headsets with different devices, then rst connect one earbud with your first device and connect the second earbud with your second device. Please ensure that the first connected earbud should
be in the case with the lid closed or at least 10-15 meters away from the first connected earbud or else, they will connect to each other.

Charging the case & earbuds

• Use only 5V/1A USB charger to charge this product.
• This product or the bluetooth function cannot be used during charging.
• There are 4 LED lights inside the charging case which indicates available battery.
• Each LED light reects 25% available battery power.
• To charge the case, plug in the type-A charging cable.
• White LED light will ash while charging the case and all four white LED light will be steady once charging is complete.
• The earbuds will charge while placed in the case with the lid closed.
• Earbuds will show red LED light while charging.
• Earbuds will ash blue LED light for 4-5 seconds and go off,
  once it is fully charged.

Functions

1. Switch On/Off the earbuds
   Click on the multi function button on your earbuds for one second to switch then on. Click on the multi function button on your earbuds for four second to switch then off.

2. Voice assistance
   Click on the multi function button 3 times on your right earbud to activate the Google assistant/Siri. Google assistant/Siri will pop up on your phone screen.

3. Play/Pause music
   Single click on the multi function button to play/pause the music.

4. Answer/Reject calls
   Single click on the multi function button to answer, cancel or hangup the calls & double click to reject incoming calls.

5. Change music track
   Click on the multi function button for 2-3 second on your left earbud to change the track to previews one. Click on the multi function button for 2-3 second on your right earbud to change the track to next one.

6. Increase/Decrease volume
   Double click on the multi function button on your left earbud to decrease the volume. Double click on the multi function button on your right earbud to increase the volume.

Reset the product

If both earbuds fail to paired or connect with other paired or
new devices, then follow further step to reset then.

• Switch off both earbuds by pressing the multi function button for 10 seconds on them.
• Doing this will erase all pairing history and settings saved on both earbuds.
• Press multi function button for one second on both earbuds to switch them on.
• Place both earbuds back in the case and close the lid.
• Now these are ready to use just like the new ones.
• If your earbuds is still not connecting to your device, then open bluetooth settings on your device and delete “Boult Audio Livebuds” in the paired devices.
• Now search for new available devices and connect to “Boult Audio Livebuds”.
• Now, you can enjoy your earbuds just like a brand new headset.

Safety Precautions

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the earbuds.

• Use only a 5V/1A USB charger to charge this product.
• Please keep the device away from extreme heat, humidity or corrosive environment.
• Please don’t over-charge the earbuds or the case, as it will decrease the battery service life.
• Please use only a good quality phone charger or USB charging port to charge the case.

Contact us:

Watch the VIDEO tutorial at
boultaudio.com/howto2
Call us at +91 8595516267 & enter code 02 for a personalized training session or queries

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>