MASTERCRAFT MD17E-DS0BV Dustless Sander Instruction Manual
- June 3, 2024
- MASTERCRAFT
Table of Contents
MD17E-DS0BV Dustless Sander
Instruction Manual
Address: 777 South Street
PO. Box 2310
Newburgh, NY 125500606
TEL: 800-835-7812
845-565-8850
FAX: 800-752-6883
845-565-9392
mastercraftusa.com
techsupport@mastercraftusa.com
MD17E-DS0BV Dustless Sander
Real and Follow All Instructions, Warnings & Cautions Before Lsing This
Machine
This floor sander will afford you many years of trouble-free operating
satisfaction, provided it is given proper care. All parts have passed rigid
quality control standards prior to being assembled to produce the finished
product. Prior to packaging, the vacuum was again inspected for assurance of
flawless assembly.
Your floor sander is protectively packed to prevent damage in shipping. We
recommend that upon delivery, unpack the sander and inspect it for any
possible damage. Only a visual examination will reveal damage that may have
occurred.
If damage is discovered, immediately notity the transportation company that
delivered your sander. As a shipper, we are unable to report claims for con
cealed damage. You must originate any claims within 5 days.
This manual is for your protection and information. PLEASE READ CAREFULLY
since failure to follow precautions could result in discomfort or injury.
Treat this floor sander as you would any other high grade precision made
product. Dropping, unreasonable bumping across thresholds and other misuses
may result in a damaged unit which is not be covered by warranty.
GROUDING METHODS
This floor sander is designed to move from side to side. Raise handle slightly
to guide right. As handle is raised high er, the faster it will move to the
right.
Lower the handle to guide left. Likewise, the more you lower handle, the
faster it will move to the left.
Plug in the power cable. With pad driver in position, adjust handle and lock
into a comfortable operating position.
Place hands on handle grips and squeeze trigger locks beneath grips.
This will activate the motor and start pad driver operating.
Begin operating this floor sander at the closet possible point to an
electrical outlet and work away from the out let. This will prevent running
over the electrical cord.
PAD DRIVER INSTALLATION
- Unplug power cable and LOCK handle in upright position.
- Tilt the floor sander back until the handle is laying on the floor and underside of the machine is fullyexposed.
- Holding the pad driver in both hands straddling the motor with your back to the handle, bend over and fit the three slots of the clutch plate over the three lugs of the drive plate.
- Turn the pad driver counterclock wise as far as it will go.It is now seated and ready for operation.
To Remove:
Disengage the clutch plate slots from drive plate lugs by turning clockwise.
CAUTION
Disconnect wall plug before leaving floor sander unattended to prevent
accidental startup.
DO NOT operate this sander without brush or pad driver and pad in place.Never
attempt to lock
pad driver on floor sander by positioning (JUMPING) running floor sander on
unattached pad driver.
DO NOT leave a plugged in floor sander unattended.
VACLUM ASSEMBLY DRAWING E PARTS LIST
|
---|---
Ref No| Part Description| Qty| Part No
---|---|---|---
1| 4FtX1’% Vacuum Hose Assy.| 1| 240427
2| Vacuum Cover| 1| 240389
3| Holdown Clamp| 2| 447226
4| Pop Rivet| 4| 214639
5| Reusable Cloth Filter Bag| 1| 445738
6| Bag Slide Clamp| 1| 444251
7| Grey Cloth Filter Bag w/Elastic| 1| 449962
8| Flat Gasket| 1| 498742
9| Filter Retainer Ring| 1| 447455
10| Vacuum Body w/Holdown Ring| 1| 240338
11| Motor Guard| 1| 422398
12| Vacuum Motor| 1| 471666A
13| Motor Gasket| 2| 457752
14| Orange Wire Nut| 2| 398985
15| Motor Housing| 1| 240303
16| #10-32 X .65 Screw| 4| 368385
17| 6.25 OD Screen| 4| 445878
18| #10-32 X .31 Screw| 1| 368385
19| 6/3 Line Cord| 4| 424463
20| Strain Relief| 3| 443379
21| Washer| 1| 369519
22| #1a- 20 X ‘/” Screw| 1| 331740
23| #12 Internal Tooth Lockwasher| 1| 364037
24| Vacuum Motor Base Assembly| 1| 239291
Address: 777 South Street
PO. Box 2310
Newburgh, NY 125500606
TEL: 800-835-7812
845-565-8850
FAX: 800-752-6883
845-565-9392
mastercraftusa.com
techsupport@mastercraftusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>