U-Turn Audio Gen 1 Orbit Turntable User Guide
- June 13, 2024
- U-Turn Audio
Table of Contents
**U-Turn Audio Gen 1 Orbit Turntable User Guide
**
Getting started
A) Place platter on spindle.
B) Slide dust cover onto hinges.
C) Connect power adapter to power jack.
D) Connect RCA cables.
Installing the belt
A )Wrap belt around pulley groove. Then hold belt along the
platter’s back edge with your right hand.
B )Keeping your right hand in place, use your left hand to guide the belt into the groove around the platter.
Changing speeds
Manual speed change
Move belt to upper groove (33 RPM) or lower groove (45 RPM) to change speed
Electronic speed change (if equipped)
Change speeds (33/45 RPM) using the speed control knob
Removing the stylus guard
For Audio-Technica, Grado, and Ortofon OM5E:
Pull cover forward until it slides off.
For Ortofon 2M Red and Blue:
Pinch tab then pull cover down.
Connecting the turntable
Using the built-in phono preamp (if equipped):
Turn preamp on or off by pressing the bypass switch .Preamp is enabled when
preamp LED is on. With preamp enabled, connect turntable directly to any
powered speakers or amplifier.
If your turntable has no built-in preamp:
Connect turntable to an external phono preamp or any amplifier or speakers
with a dedicated phono input.
``
Turn Preamp
A )Position turntable on a stable surface. Place bubble level (included) anywhere on top of plinth
B )If the bubble is not centered, adjust the height ofthe feet to level turntable. Turn bottom of foot to raise or lower it
| Bubble position | Adjustment |
|---|---|
| Turntable is level | |
| Lower back foot or raise front feet | |
| Raise front left foot or lower front |
right and back foot
3-year warranty
We stand by our products with a 3-year warranty that covers any defects in materials or workmanship
You can view our full warranty policy at uturnaudio.com/warranty.
If you need warranty service, please contact us at [email protected] or by phone at 781-451-1445.
Additional support
Setup videos & tutorials
uturnaudio.com/orbit-setup
Email
[email protected]
Phone
781-451-1445