MEAN WELL XLC-40-12 LED Driver Owner’s Manual

XLC-40-12 LED Driver

“`html

Specifications:

• Model: XLC-40-12-, XLC-40-24-
• Output:
  • Rated Voltage: 12V, 24V
  • Rated Current: 3.4A, 1.7A
  • Rated Power: 40.8W
  • Ripple & Noise: 60mVp-p
• Input:
  • Voltage Range: 100 ~ 305VAC, 141 ~ 431VDC
  • Frequency Range: 47 ~ 63Hz
  • Power Factor: PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC
• Efficiency: 86%, 88%
• Size: 1474032mm, 1074032mm (LWH)

Product Usage Instructions:

Installation:

1. Ensure the input voltage matches the specified range.

2. Connect the LED driver to the power source following the
   provided wiring diagram.

3. Secure the connections and ensure proper grounding.

Dimming Operation:

This LED driver supports B type dimming with a 3-in-1 function.
To adjust the output constant current level, connect DIM+ and DIM-
using one of the following methods: 0 ~ 10VDC, 10V PWM signal, or
resistance.

NFC Setting:

1. Download the MEAN WELL app from the Apple Store or Google Play
   Store.

2. Approach the LED driver NFC sensing position with your phone to
   perform sensing.

3. Use the app to display and modify functional parameters as
   needed.

4. Tap the app’s write button and move your phone antenna close to
   the NFC sensing position for parameter updating.

FAQ:

Q: Can I adjust the output current of the LED driver?

A: Yes, you can adjust the output current via DIP switch or NFC
using the MEAN WELL app.

Q: What dimming options are supported by this LED driver?

A: The LED driver supports dimming through 0 ~ 10VDC, 10V PWM
signal, or resistance methods.

“`

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series
User’s Manual

2

DC.176-280V

I

File Name:XLC-40-SPEC 2023-10-19

40W Constant Voltage LED Driver

XLC-40 series

SPECIFICATION

MODEL

XLC-40-12-

XLC-40-24-

OUTPUT

RATED VOLTAGE

12V

RATED CURRENT

3.4A

RATED POWER Note.2

40.8W

RIPPLE & NOISE (max.) Note.3 60mVp-p

24V 1.7A 40.8W

VOLTAGE TOLERANCE Note.4 ±4.0%

LINE REGULATION

±0.5%

LOAD REGULATION

±2%

SETUP, RISE TIME Note.5 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC

VOLTAGE RANGE

100 ~ 305VAC 141 ~ 431VDC

FREQUENCY RANGE POWER FACTOR

47 ~ 63Hz
PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

INPUT

TOTAL HARMONIC DISTORTION
EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.)

THD< 10%(@load 50%/230VAC; @load 75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

86%

88%

0.5A / 115VAC 0.25A / 230VAC 0.2A/277VAC COLD START 10A(twidth=100s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT

OVER LOAD

PROTECTION SHORT CIRCUIT OVER VOLTAGE

OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP.
WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT VIBRATION OPERATING ALTITUDE

SAFETY STANDARDS

WITHSTAND VOLTAGE

SAFETY & ISOLATION RESISTANCE

EMC

EMC EMISSION

51 units (circuit breaker of type B) / 51 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

105 ~ 150% rated output power

Protection type:Hiccup mode , recovers automatically after fault condition is removed

Hiccup mode, recovers automatically after fault condition is removed

13 ~ 16V

26 ~ 32V

Shut down and latch off o/p voltage, re-power on to recover

Shut down output voltage, recovers automatically after fault condition is removed

Tcase=-25 ~ 90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)

Tcase=90

20 ~ 90% RH non-condensing

-40 ~ +80, 10 ~ 95% RH

±0.03%/ (0 ~ 50)

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

2000 meters

ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations; BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004 approved;

I/P-O/P:3.75KVAC

I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH

Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C(@load 50%) ; BS EN/EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020

OTHERS NOTE

EMC IMMUNITY

Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV), EAC TP TC 020

FLICKER Note.6 MTBF

PstLM 1, SVM 0.4 xx K hrs min. Telcordia SR-332 (Bellcore) ;

xx Khrs min. MIL-HDBK-217F (25)

DIMENSION

1474032mm,1074032mm (LWH)

PACKING

xx Kg;xxpcs / xxKg /x.xxCUFT

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power LED Driver

XLC-40 series

SPECIFICATION

MODEL

XLC-40-H-

OPEN CIRCUIT VOLTAGE Note.2

60V

OUTPUT

DEFAULT CURRENT CURRENT ADJ.RANGE (BY DIP SWITCH OR NFC)
CONSTANT CURRENT REGION Note.3
RATED POWER Note.4
CURRENT RIPPLE
CURRENT TOLERANCE DIMMING RANGE SETUP, RISE TIME Note.5,6

1050mA
0.6~1.4A
9~54V
40W <4%(@full load) ±5% 0~100% 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC

VOLTAGE RANGE FREQUENCY RANGE
POWER FACTOR

100 ~ 305VAC 141 ~ 431VDC
47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

INPUT

TOTAL HARMONIC DISTORTION
EFFICIENCY (Typ.) Note.7 AC CURRENT INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT

THD< 10%(@load 50%/230VAC; @load 75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) 88% 0.5A / 115VAC 0.25A / 230VAC 0.2A/277VAC COLD START 10A(twidth=100s measured at 50% Ipeak) at 230VAC; Per NEMA 410
51 units (circuit breaker of type B) / 51 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC

STANDBY POWER CONSUMPTION Note.8

Standby power consumption<0.5W(Dimming off)

SHORT CIRCUIT PROTECTION
OVER TEMPERATURE
WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING ALTITUDE
SAFETY STANDARDS
DALI STANDARDS

Hiccup mode, recovers automatically after fault condition is removed Blank & B type: De-rating to lowest output level. Recovers automatically after fault condition is removed. DA2 type: Stage 1: De-rating to 75% loading; Stage 2: De-rating to 50% loading. Recovers automatically after fault condition is removed. Tcase=-25 ~ 90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section) Tcase=90 20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 2000 meters ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations; BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004 approved; Comply with IEC62386-101,102,207

WITHSTAND VOLTAGE

SAFETY & ISOLATION RESISTANCE

EMC

EMC EMISSION

I/P-O/P:3.75KVAC
I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C(@load 50%) ; BS EN/EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020

OTHERS NOTE

EMC IMMUNITY

Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV), EAC TP TC 020

FLICKER Note.9 MTBF

PstLM 1, SVM 0.4 xx K hrs min. Telcordia SR-332 (Bellcore) ;

xx Khrs min. MIL-HDBK-217F (25)

DIMENSION

1474032mm,1074032mm (LWH)

PACKING

xx Kg;xxpcs / xxKg /x.xxCUFT

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

BLOCK DIAGRAM

EMI FILTER

I/P

&

RECTIFIERS

POWER SWITCHING

RECTIFIERS &
FILTER

DC to DC

+V -V

O.L.P.

PWM&PFC CONTROL

O.T.P.

DRIVING METHODS OF LED MODULE

– XLC-40-H

For 40W application

60V

55V

600mA, 54V 700mA, 54V

50V

45V

40V 1050mA, 38V
35V 1400mA, 28.6V
30V

25V

20V

15V

10V 600mA, 9V
5V

1400mA, 9V

0V 400mA 500mA 600mA 700mA 800mA 900mA 1000mA 1100mA 1200mA 1300mA 1400mA 1500mA

CONSTANT POWER TABLE
XLC-40-H is a multiple-stage constant power driver, selection of output current through DIP switch or NFC setting is exhibited below.

CURRENT & VOLTAGE LIMIT
DETECTION CIRCUIT

DA+/PUSH DA-/N

Vo Io 9~54V 600mA

DIP S.W 1 2 3
—- —- —-

9~54V 700mA

—- —- ON

9~50V 800mA

—- ON —-

9~45V 900mA

—- ON ON

9~38V 1050mA(default)

ON —- —-

9~33V 1200mA

ON —- ON

9~31V 1300mA

ON ON —-

9~29V 1400mA

ON ON ON

Note: 1.The operating voltage range which show on this table is recommend to use. 2.NFC current setting function by request.

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

NFC Function Description(By request)
1. The output current of the NFC Mode LED driver can be adjusted using NFC via the mobile APP Operation Instruction Compatible phone
Install an NFC-compatible smart mobile device or phone with AndroidTM 4.1 or IOS12 updates. Steps for setting output current via NFC 1. Download Meanwell APP on mobile device or mobile phone, and enable NFC function. 2. Check the NFC antenna position of the mobile phone please. 3. Enter Meanwell APP ->Top left menu ­Installation Manual/APP->PowerNFC,approach the LED driver NFC sensing position and perform sensing. 4. APP displays the functional parameters, and the relevant parameters are modified as required. 5. Tap the APP write button and quickly move the phone antenna close to the NFC sensing position of the LED driver. 6. The write completes when the mobile phone displays”Success”.

Model name Adjustable Output Current NFC Setting password
Factory setting
Setting to LED Driver

Output Current Level
GTIN

To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: MEAN WELL on

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

DIMMING OPERATION
B type

3 in 1 dimming function
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)

+V +

-V

–

DIM+ +

Additive Voltage DIM-

“DO NOT connect “DIM- to -V”

Output current (%)

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0% 0V 1V

2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage

+V +

-V

–

DIM+

Additive PWM signal DIM-

“DO NOT connect “DIM- to -V”

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input

Applying additive resistance: 0~100k

100%

Output current (%)

+V +
-V DIM+

90%

80%

70%

–

60%

50%

40%
Additive Resistance
30%

DIM-

20%

“DO NOT connect “DIM- to -V”

10%

0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantity for synchronized dimming operatio)n

Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.

Dimming input: Additive resistance

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

DIMMING OPERATION
DA2 type (DALI-2 digital dimming function)
Input wiring diagram

AC/N AC/L
Push Button

AC/N AC/L
DA+/PUSH DA-/N

XLC-40

AC/N AC/L
DA+ DA-

AC/N AC/L
DA+/PUSH DA-/N

XLC-40

PUSH dimming (primary side)
·The factory default dimming level is at 100%. ·If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver. ·Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button. ·The maximum length of the cable from the push button to the last driver is 20 meters.

Action Short Push Double Click Long Push

Action duration Function

0.1~1s

Turn ON-OFF the driver

Click twice in 1.5s Set up the dimming level to 100%

1.5~10s

Every Long Push changes the dimming direction, dimming up or down

File Name:XLC-40-SPEC 2023-10-19

LOAD (%)

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

OUTPUT LOAD vs TEMPERATURE

100

80

230 VAC

60

110VAC

40

20

-25 -15

0

15

30

40

50 60

70 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta ()
STATIC CHARACTERISTIC

LOAD (%)

100 90 80 70 60 50 40
100 110 130 150 170 190 210 230 250 270 290 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.

LIFE TIME

LOAD (%)

100 80 60 40 20

-25

0

20

45

55

65

75 85 90 (HORIZONTAL)

Tcase ()

LIFETIME(Kh)

120

100

80

60

40

20

0

25

35

45

55

65

75

85

Tcase( )

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

TOTAL HARMONIC DISTORTION (THD)
XLC-40-H Model,Tcase at 75

THD(%)

12

10

8

6 4

TBD

115VAC 230VAC 277VAC

2

0

50%

60%

70%

80%

90%

100%

LOAD (1050mA)

POWER FACTOR (PF) CHARACTERISTIC
XLC-40-H Model,Tcase at 75

THD(%)

12

10

8 6

TBD

4

115VAC 230VAC 277VAC

2

0 50%

60%

70%

80%

90%

100%

LOAD (1400mA)

1

0.98

0.96

0.94

0.92 0.9
0.88

TBD

0.86

115VAC 230VAC 277VAC

0.84

0.82

0.8

50%

60%

70%

80%

90%

100%

LOAD (1050mA)

PF

1

0.98

0.96

0.94

0.92

0.9 0.88 0.86

TBD

115VAC 230VAC 277VAC

0.84

0.82

0.8

50%

60%

70%

80%

90%

100%

LOAD (1400mA)

EFFICIENCY vs LOAD
XLC-40 series possess superior working efficiency that up to 88% can be reached in field applications. XLC-40-H Model,Tcase at 75

90

90

85

85

EFFICIENCY (%)

80

75

70 65

TBD

60

55

50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

115VAC 230VAC 277VAC

80

75

70 65

TBD

60

55

50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

LOAD (1050mA)

LOAD (1400mA)

115VAC 230VAC 277VAC

EFFICIENCY (%) PF

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

MECHANICAL SPECIFICATION

Blank type

2-3.6

(XLC-40 Built-in Type)
107 mm 99 mm

TB2

1 2

1

Case No.XLC-25 Unit:mm

123
40 mm

32 mm

1 2

TB1

DIP-SWITCH
(only for H type)

(

)

Terminal Pin No. Assignment( TB1)

Pin No. Assignment

1

AC/N

2

AC/L

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

1

+V

2

-V

123
40 mm

1 2

TB1

107 mm

(

)

1

1

2
TB2 3

4

DIP-SWITCH
(only for H type)

Terminal Pin No. Assignment( TB1)

Pin No. Assignment

1

AC/N

2

AC/L

107 mm

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

1

+V

2

-V

3

DIM+

4

DIM-

TB2

1 2

1 23
40 mm

1

2 3

TB1

4

DIP-SWITCH
(only for H type)

(

)

32 mm

(

)

Terminal Pin No. Assignment( TB1)

Pin No. Assignment

1

AC/N

2

AC/L

3

DA+/PUSH

4

DA-/N

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

1

+V

2

-V

Item
Strain-relief cap

Order No.
13XLC-RD 13XLC-RT

Quantity
Each*2 pcs for 1 Set

File Name:XLC-40-SPEC 2023-10-19

40W Multiple-Stage Constant Power/Constant Voltage LED Driver

XLC-40 series

MECHANICAL SPECIFICATION

2-3.6

40 mm 31.5 mm

(XLC-40-S Independent Type)
147 mm 99mm

TB2

1 2

1 TB1
2

DIP-SWITCH
(only for H type)

(

)

1 23 32mm

Case No.XLC-25-S Unit:mm

40 mm

Terminal Pin No. Assignment( TB1)

Pin No. Assignment

1

AC/N

2

AC/L

147mm

1 2

TB1

(

)

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

1

+V

2

-V

1 2
TB2 3
4
DIP-SWITCH
(only for H type)

123 32mm

40 mm

Terminal Pin No. Assignment( TB1)

Pin No. Assignment

1

AC/N

2

AC/L

147 mm

1
2 TB1
3 4

(

)

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

1

+V

2

-V

3

DIM+

4

DIM-

32mm

TB2

1 2

DIP-SWITCH
(only for H type)

1 23

32 mm

(

)

Terminal Pin No. Assignment( TB1)

Pin No. Assignment

1

AC/N

2

AC/L

3

DA+/PUSH

4

DA-/N

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

1

+V

2

-V

File Name:XLC-40-SPEC 2023-10-19

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>