JONATHAN Y JYL1702 24 Inch Wide Led Abstract Pendant Instruction Manual
- June 1, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL1702 24 Inch Wide Led Abstract Pendant
Product Information
Specifications
- Model: JYL1702
- Product Dimensions: 24″ Diameter x 12-84″H
Product Usage Instructions
Preparation
Before beginning assembly of the product, ensure all parts are present by comparing them with the package contents list and hardware contents list. Do not attempt to assemble the product if any part is missing or damaged. Estimated Assembly Time: 20 minutes.
Installation Steps
- Fix the mounting bracket (B) to the outlet box using mounting screws (F).
- Make wire connections using wire connectors (A) as per the reference chart.
- Connect Hot (Black or Red) Outlet Supply Wire to: Black
- Connect Neutral (White) Outlet Supply Wire to: White
Grounding Instructions
For installation in the United States: Wrap the ground wire from the outlet box around the green ground screw (B) on the mounting bracket, at least 2″ from the wire end. Tighten the ground screw. If the fixture has a ground wire, connect it to the outlet ground wire using a wire connector.
For installation in Canada: If the fixture includes a ground wire, wrap it around the green grounding screw on the mounting bracket and tighten the screw.
Final Steps
- Carefully remove packaging from the fixture, adjust wire length to the desired mounting height, and attach the lamp body (D) to the bracket (B) using machine screws (C).
Care and Maintenance
To clean the outside of the fixture, use a dry or slightly dampened clean cloth with clean water (never a solvent). For cleaning the inside, disconnect power and wipe the interior surface with a clean cloth.
Part List and Hardware List
| Piece Description | Picture | Quantity |
|---|---|---|
| Wire connector | 3X | |
| Lamp body | 1X | |
| Mounting bracket | 1X | |
| Ground screw | 1X | |
| Machine screw | 2X | |
| Mounting screw | 2X |
Frequently Asked Questions
Q: Can I replace the external flexible cable or cord of the lamp?
A: No, if the cord is damaged, the lamp should be destroyed as stated in the manual.
Q: How should I clean the fixture?
A: Use a dry or slightly dampened clean cloth with clean water to wipe the outside and inside surfaces of the fixture. Avoid using solvents or abrasives.
Q: What should I do if I find any missing or damaged parts?
A: Do not attempt to assemble the product. Contact customer support by sending a detailed email to cs@jonathany.com for assistance.
Model#: JYL1702
Product Dimensions: 24 “Dx12-84″H
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean
cloth (use clean water, never a solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by
turning off the circuit breaker or by removing the fuse at the fuse box. Next,
use a dry or slightly dampened clean clorth (use clean water, never a solvent)
to wipe the interior surface of the fixture.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced
- If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
If there are any questions relating to defects, missing parts, assembly
issues, replacements, or device connectivity issues, please send a detailed
email to cs@jonathany.com
- Fix the mounting bracket(B) to the outlet box with mounting screw(F).
- Make wire connections, with wire connectors(A), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:| Connect, Neutral, White Outlet Supply Wire to:
---|---
Black| White
- Parallel Cord (round & smooth)| * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored
stripes)
|
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor| Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See
Illustration on left. )
Grounding Instructions
a) For installation in the United States: Wrap ground wire from outlet box
around green ground screw(B) on mounting bracket, no less than 2″ from wire
end. Tighten ground screw. If fixture is supplied with a ground wire, connect
to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap
ground wire around green grounding screw on mounting bracket. Tighten ground
screw.
- Carefully remove packaging from fixture, adjust wire length to desired mounting height, fix the lamp body (D) to bracket(B) using machine screw(C).
ENJOY YOUR LAMP
Compatible Dimmer Model: Brand
- Model No.TP-LINK HS220LUTRON
- MACL-153MLUTRON DVCL-153PLUTRON
- PD-6WCLLUTRON P-PKG1W-WH-RLEVITON
- R11-DSL06-1TW LEVITON R00-RNL06-0TW LEVITON
- R68-06674-POTLEVITON R02-DW6HD-2RW