JONATHAN Y JYL7127 Malthe 71 Tall LED Arc Smart Floor Lamp Instruction Manual
- June 1, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL7127 Malthe 71 Tall LED Arc Smart Floor Lamp
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed
**This portable lamp has two polarized plug ( one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet,reverse the plug, if it still does not fit, contact a qualified electrician.Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE| DESCRIPTION| PICTURE| QUANTITY| PIECE|
DESCRIPTION| PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A| main body stents| 
| 1X| D| fallen wrench| **| 1X
B| counter weight| **| 1X| E| transformer| **| 1X
C| screw| **| 2X| F| the remote control| ****| 1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
If there are any questions relating to defects, missing parts, assembly
issues, replacements, or device connectivity issues, please send a detailed
email to cs@jonathany.com
- Locking main body stents (A) to counter weight (B) with screw (C) and allen wrench(D).
- lnsert transformer (E) correctly.
- Adjust the lights with the remote control.
Put the light on a level surface to check if everything is stable.
Use of Remote Control
Use of intelligent remote control
No| Key| Use of Remote Control| Guide of Remote
Contro l
---|---|---|---
1| | LIGHT ON| Short press for turning on
long press within 10S after device connected to power till the light is off
and on again for matching code.
2| | LIGHT OFF| Short press for turning off
long press within 10S after device connected to power till the light Is off
and on again for canceling code.
3| | Brightness Increase| Short press for brightness Increase
long press for continuous slow brightness increase
4| | Brightness Decrease| Short press for brightness decrease
long press for continuous slow brightness decrease
5| | Color Temperature Decrease| long press for continuous slow brightness
decrease
long press for continuous slow color temp4!rature decrease
6| | Color Temperature Increase| Short press for color temperature increa.se
Long press for continuous slow color temperature increase
7| | Network Matching or Canceling| long press “SETUP” SS till device blinks
once before blinking rapidly to match or cancel network
8| | RGB Dynamic Switching| Short press to choose the dynamic RGB
9| | RGB Static Switching| Short press to choose the static RGB
10| | Reading/Party/Sloop Modo Switching| Short press to chc1nge the moue of
Reunify Party Sleep
11| | Night Light| Short press to choose the night light
12| | LIGHT OFF Delay| Short press to tum off the device with 60S delay
Pairing JONATHAN Y Mobile APP
Intelligent Function
In addition to the included control , you can operate your device with the
JONATHAN Y app.
Upgradeable with Smart Features
Scan the code below with your phone to find out how you can enable smart
features through the JONATHAN Y app and integrate with your smart home
ecosystem.
Downloading JONATHAN Y Mobile APP
- To use the JONATHAN Yapp, download it from the App Store or Google Play.
- Open the app to create your account.
- To set up a WI-Fi connection you will need the SSID and Wi-Fi password for the network you wish to connect to.
- You can name your device if you choose.
Pairing JONATHAN Y Mobile APP
Scan the QR code to download the “JONATHAN Y ” APP
a. Download and Open “JONATHAN Y” Mobile App.
b. Press the + button in the top right corner of the mobile App.
c. Under .. Add Manually .. select” Smart bulb”
d. Type in your Wi-Fi name & password then proceed to click “Next”.
e. Press “SETUP” on the remote control for 5S. The device blinks once
before blinking rapidly.
f. Click “Confirm indicator rapidly blink”
g. After the loading screen go back to homepage and you should be able to
find your device there.
With drawing JONATHAN Y Mobile APP
Press “SETUP” on the remote control for 5S till device blinks once before blinking rapidly to cancel network, if you prefer not using the app or broadcasting Wi-Fi.
Q &A
Q: If you cannot pair the JONATHAN Y APP
A:
- Please check whether the WI-Fl network is 2.4g.
- Turn off the power and turn on the power again. Long press “SETUP” on the remote control for 5S till device blinks once before blinking rapidly.
- Pairing JONATHAN Y Mobile APP again.
Q: If your remote cannot control the receiver.
A:
- Please turn off the power.
- Turn on the power again.
- Long press “ON” on the remote control within 1 OS till the light is off and on again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>