ADVANTECH High Speed Multi function Card User Manual
- June 7, 2024
- Advantech
Table of Contents
****
STARTUP MANUAL
PCI-1712/1712L
1 MS/s, 12-bit, 16-ch High-Speed Multifunction card
Packing List
Before installation, please make sure that you have received the following:
- PCI-1712, PCI-1712L card
- Driver CD
- Quick Start User Manual
If anything is missing or damaged, contact your distributor or sales representative immediately.
User Manual
For more detailed information on this product, please refer to the PCI-1712
User Manual on the CD-ROM (PDF format).
CD:\Documents\Hardware Manuals\PCI\PCI-1712
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause interference in which case the user is
required to correct the interference at his own expense.
CE
This product has passed the CE test for environmental specifications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from Advantech. Please contact your
local supplier for ordering information.
Overview
The PCI-1712/1712L is a powerful high-speed multifunction DAS card for PCI bus. It features a 1MHz 12-bit A/D converter, an on-board FIFO buffer (storing up to 1K samples for A/D, and up to 32K samples for D/A conversion). The PCI-1712/1712L provides a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, 2 12-bit D/A output channels, 16 digital input/output channels, and 3 10MHz 16-bit multifunction counter channels.PCI-1712/1712L provides specific functions for different user requirements.
Notes
For more information on this and other Advantech products, please visit our
websites at:
http://www.advantech.com/eAutomation
For technical support and service: http://www.advantech.com/support/
This startup manual is for PCI-1712/1712L.
Part No.2003171210
1st Edition
June 2007
Specifications
Digital Input/Output
| Input Channels | 16 bi-directional |
|---|---|
| Number of Ports | 2 |
| Input Voltage | Low |
| High | 2.0V min. |
| Output Voltage | Low |
| High | 2.4V min. @ – 15 mA (source) |
Analog Input
| Channels | 16 single-ended or 8 differential or combi-nation |
|---|---|
| Resolution | 12-bit |
| FIFO Size | 1K samples |
| Max. Sampling Rate | Milti-channel, single gain: MS/s |
Milti-channel, multi gain: 600kS/s
Milti-channel, multi gain, unipolar/bipolar: 400kS/s
Conversion Time| 500 ns
Input range and Gain List| Gain| 0.5| 1| 2| 4| 8
Unipolar| N/A| 0~10| 0~5| 0~2.5| 0~1.25
Bipolar| ±10| ±5| ±2.5| ±1.25| ±0.625
Drift
| Gain| 0.5| 1| 2| 4| 8
Zero(µV
/°C)
| ±80| ±30| ±30| ±30| ±30
Gain(pp
m/°C)
| ±30| ±30| ±30| ±30| ±30
Small Signal
Bandwidth for PGA
| Gain| 0.5| 1| 2| 4| 8
Band-
width
| 4.0
MHz
| 4.0
MHz
| 2.0
MHz
| 1.5
MHz
| 0.65
MHz
Common Mode Voltage| ±11 V max. (operational)
Max. Input Voltage| ±20 V
Input Protect| 30 Vp-p
Input Impedance| 100 M Ω /10pF(Off); 100 M Ω /100pF(On)
Trigger Mode| Software, onboard programmable pacer or external, pre-
trigger, post-trigger, delay-trigger, about-trigger
Accuracy
| ****
DC
| DNLE: ±1LSB
INLE: ±3LSB
Offset error: < 1 LSB
Gain| 0.5| 1| 2| 4| 8
Gain
error
(% FSR)
| 0.15| 0.03| 0.03| 0.05| 0.1
AC| SNR: 68 dB
ENOB: 11 bits
THD: -75 dB typical
External TTL Trigger Input| Low| 0.8 V max.
High| 2.0 V min.
External Ana- log Trigger Input| Range| -10V to + 10 V
Resolution| 8-bit
Impedence| 100 M Ω /10 pF typical
Clock Output| Low| 0.5 V max.@ +24 mA
High| 2.4 V min. @ -15 mA
Trigger Output| Low| 0.5 V max.@ +24 mA
High| 2.4 V min. @ -15 mA
| Channels | 2 |
|---|---|
| Resolution | 12-bit |
| FIFO Size | 32K samples |
| Operation Mode | Single output, continuous output, waveform output |
| Using Internal | 0~+5V, 0~+10 V |
| Output Range (Internal & External Reference) | Reference |
-10~+10V
Using External Reference| 0 ~ + x V @ + x V
(- 10 ≤ x ≤ 10)
-x ~ + x V @ + x V
(- 10 ≤ x ≤ 10)
Accuracy| Relative| ±1 LSB
Differential Non-linearity| ±1 LSB (monotonic)
Offset| < 1 LSB
Slew Rate| 20 V / µs
Drift| 10 ppm / °C
Driving Capability| ±10 mA
Max. Transfer Rate| Single-channel: 1 MS/s max. for FSR Dual-channel:
500 kS/s max. for FSR
Output Impedance| 0.1 Ω max.
Digital Rate| 5 MHz
Settling Time| 2 µs(to ±1/2 LSB of FSR)
External Clock Input| Low| 0.8 V max.
High| 2.0 V min.
External TTL
Trigger Input
| Low| 0.8 V max.
High| 2.0 V min.
Analog Output (PCI-1712 only)
Counter/Timer
| Channels | 3 |
|---|---|
| Resolution | 16-bit |
| Compatibility | TTL level |
| Base Clock | 10 MHz, 1 MHz, 100 MHz, 10 kHz |
| Max. Input Frequency | 10 MHz |
| Clock Input | Low |
| High | 2.0 V min. |
| Gate Input | Low |
| High | 2.0 V min. |
Counter
Output
| Low| 0.5 V max. @ +24mA
High| 2.4 V min. @ -15mA
General
| I/O Connector Type | 68-pin SCSI-II female |
|---|---|
| Dimensions | 175 mm x 100 mm ( 6.9″ x 3.9″ ) |
| Power Consumption | Typical |
+12 V @ 960mA
Max.| +5 V @ 1A
+12 V @ 700mA
Temperature| Operation| 0 ~ +60°C ( 32~ 140°F )
(refer to IEC 68 -2 – 1 ,2)
Storage| -20 ~ +85°C ( -4 ~185°F )
Relative Humidity| 5 ~ 95% RH non-condensing
( refer to IEC 68-2-3)
Certification| CE certified
Installation
Software Installation
Hardware Installation
-
Turn off your computer and unplug the power cord and cables. TURN OFF your c
-
computer before installing or removing any components on the computer.
-
Remove the cover of your computer.
-
Remove the slot cover on the back panel of your computer.
-
Touch the metal part on the surface of your computer to neutralize the static electricity that might be on
your body. -
Insert the PCI-1712,1712L card into a PCI slot. Hold the card only by its edges and carefully align it with the slot. Insert the card firmly into place. Use of excessive force must be avoided; otherwise, the card might be damaged.
-
Fasten the bracket of the PCI card on the back panel rail of the computer with screws.
-
Connect appropriate accessories (68-pin cable, wiring terminals, etc. if necessary) to the PCI card.
-
Replace the cover of your computer chassis. Re-connect the cables you removed in step 2.
-
Plugin the power cord and turn on the computer.
PIN Assignment
*: Pins 20, 22~25, 54, 56~59 are not defined on PCI1712L.
| Signal Name | Reference | Direction | Description |
|---|---|---|---|
| AI<0..15> | AIGND | Input | Analog Input Channels 0 through 15. Each channel |
pair, AI<i, i+8> (i = 0…7),can be configured as either one differential input
or two single-ended inputs.
AIGND| –| –| Analog Input Ground.
These pins are the reference points for single-ended measurements and the bias current return point for differential measurements. All three ground references – AIGND, AOGND, and DGND – are connected together on the PCI-1712 card.
AO0_REF AO1_REF| AOGND| Input| Analog Channel 0 Out-
put External Reference. This is the external reference input for the
analog output channel 0/1 circuity.
---|---|---|---
ANA_TRG| AIGND| Input| Analog Threshold Trig-
ger. This pin is the analog input threshold trigger input
AO0_OUT AO1_OUT| AOGND| Output| Analog Channels 0 Out-
put. This pin supplies the voltage output of the analog output channel
0/1.
AI_CLK
|
DGND
|
Input
| Analog Input external
clock input. This is the external clock input for the analog input.
AI_TRG| DGND| Input| Analog Input TTL Trigger.
This is the TTL trigger for the analog triggers.
AOGND| –| –| Analog Output Ground.
The analog output voltages are referenced to these nodes. All three ground
references – AIGND, AOGND, and DGND – are connected together on your PCI -1712
card.
CNT0_CLK| DGND| Input| Counter 0 Clock Input.
This pin is the counter 0 external clock input (up to 10 MHz), counter 0
clock can be wither internal set by software.
CNT0_GATE
|
DGND
|
Input
| Counter 0 Gate Input.
This pin is for counter 0 gate control, see 82C54 data sheer for detailed
information.
CNT0_OUT| DGND| Output| Counter 0 Output. This
pin is counter 0 output, see 82C54 data sheer for detailed information.
CNT1_CLK| DGND| Input| Counter 1 Clock Input.
This pin is the counter 1 external clock input (up to 10 MHz), counter 1
clock can be wither internal set by software.
CNT1_GATE
|
DGND
|
Input
| Counter 1 Gate Input.
This pin is for counter 1 gate control, see 82C54 data sheer for detailed
information.
CNT1_OUT
|
DGND
|
Output
| Counter 1 Output. This pin is counter 1 output, see 82C54 data sheer for detailed information
CNT2_CLK
|
DGND
|
Input
| Counter 2 Clock Input.
This pin is the counter 2 external clock input (up to 10 MHz), the counter
2 clocks can be wither internal set by software.
CNT2_GATE
|
DGND
|
Input
| Counter 2 Gate Input.
This pin is for counter 2 gate control, see 82C54 data sheer for detailed
information.
CNT2_OUT
|
DGND
|
Output
| Counter 2 Output. This pin is counter 2 output, see 82C54 data sheer
for detailed information.
+12V| DGND| Output| +12 VDC Source. This pin is a +12 V power supply.
+5V| DGND| Output| +5 VDC Source. This pin is a +5 V power supply.
NC| –| –| No Connection. These pins serve no connection.
Connections
Analog Input Connections
The PCI-1712/1712L supports either 16 single-ended or 8 differential analog
inputs. Each individual input channel is software-selected. Single-ended
Channel Connections The single-ended input configuration has only one signal
wire for each channel, and the measured voltage (Vm) is the voltage of the
wire as referenced against the common ground.
Differential Channel Connections
The differential input channels operate with two signal wires for each
channel, and the voltage difference between both signal wires is measured. On
the PCI1712/1712L, when all channels are configured to differential input, up
to 8 analog channels are available.
Analog Output Connections
The PCI-1712/1712L provides two D/A output channels, AO0_OUT and AO1_OUT.
Users may use the PCI- 1712 internally-provided precision +5V (+10V) reference
to generate 0 ~+5 V and 0 ~+10 V unipolar D/A output range; or to generate -5
~+5 V and -10 ~ +10 V for bipolar output range.Users also may createD/A
output range through external references, AO0_REF and AO1_REF. The external
reference input range is 0 ~10 V. For example, connecting with an external
reference of +7 V will generate 0 ~+7 V D/A output for unipolar; and -7 ~+7 V
for bipolar. 