RETEKESS TR618 AM/FM/SW Portable radio Support USB SD and TF Card User Manual

TR618 User Manual

PARTS INTRODUCTION

LCD DISPLAY

RADIO OPERATION

1. Turn the Volume&power on/o ff knob (12) to “on” to make the unit switch on.
2. Set the function switch ( 11) to the radio.
3. Set the band with a band switch (10).
4. Turn to a station with a turning knob(13).
5. Adjust the volume control knob (12) to your desired level.
6. For AM’s better reception,please turn the unit to the position that sounds best because an internal antenna is used . For FM, extend the whip antenna and place it in the position that sounds best.

USB/SD/MICRO SD PLAYBACK

1. Turn the Volume&power on/o ff knob (12) to “on” to make the unit switch on.
2. Set function switch ( 11) to USB.
3. Plug-in USB disk/SD card or Micro SD card into USB port (14)/SD card slot (15) or Micro SD card slot (16) for MP3 or MWA playback.
4. Adjust the volume control knob (12) to your desired level.
5. Turn to next (9) or previous (7) to the track you want.
6. Press the repeat button (6)for one or all repeats.
7. To pause MP3/WMA playback by pressing play/pause(8), and resume playback by the second press this button.

MAINTENANCE

1. Please put the machine in a place where is well ventilated,don′t uses it in high-temperature environment humid environment, when maintenance, please clean the machine with a soft cloth, but don′t uses any lubricant, alcohol, etc volatile liquid.
2. The machinery parts of this machine have been fully lubricated before delivery by the factory

Tech Specifications

RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE

ATTENTION!

| Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
---|---

Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority granted by the local government radio management  departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  (1) This device may not cause harmful interference, and
  (2) this device must accept any interference received, including interference that may cause undesired operation.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  — Reorient or relocate the receiving antenna.
  — Increase the separation between the equipment and receiver.
  — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  — Consult the dealer or an experienced radio/TV technician for help.
  CE Requirements:

• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.

• Disposal
  The crossed-out wheeled bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
  IC Requirements:
  Licence-exempt radio apparatus
  This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).  Operation is subject to the following two conditions:
  (1) This device may not cause interference.
  (2) This device must accept any interference, including interference that may cause undesired operation of the device.
  RF Warning Statements
  The device has been evaluated to meet general RF exposure requirements.
  The device can be used in portable exposure conditions without restriction.
  RF Exposure Information
  

• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is an antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.

• To avoid interference, turn off the radio in areas where signs are posted to do so.

• DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Avoid Choking Hazard

| Small Parts. Not for children under 3 years.
---|---

Protect your hearing:

WARNING

|

• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before adding a headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the radio’s speaker  directly against your ear
• Use care with the earphone may be possible excessive sound pressure from  earphones and headphones can cause hearing loss

---|---

Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

Approved Accessories

WARNING|

• This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. The use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
• For a list of Retekess-approved accessories for your radio model, visit the following website:  ttp://www.Retekess.com

---|---

Guarantee

Model Number: ………………………………….
Serial Number: ………………………………………
Purchasing Date: ……………………………………….
Dealer: ……………………………………… Telephone: …………………………….
User’s Name: …………………………….. Telephone: ……………………………..
Country: …………………………………….. Address: ……………………………….
Post Code: …………………………………. Email: ……………………………………

Remarks:

1. This guarantee card should be kept by the user, no replacement if lost.

2. Most new products carry a two-year manufacturer’s warranty from the date of purchase.

3. The user can get a warranty and after-sales service as below:
   ●Contact the seller where you buy.
   ●Products Repaired by Our Local Repair Center

4. For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification Exclusions from Warranty Coverage:

5. To any product damaged by accident.

6. In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.

7. If the serial number has been altered, defaced, or removed.

Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District,
Zhengzhou, Henan, China
EU Importer: Germany Retevis Technology GmbH
Address:Uetzenacker 29,38176wendeburg
Facebook：facebook.com/Retekess.ru
E-mail: support@retekess.com.ru
Web: retekess.com.ruhttps://retekess.com.ru/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>