PwrUp Clean Wireless Phone Charger and Sterilizer Instruction Manual [BT2-712-2, BT2-751-2]
- June 2, 2024
- Bracketron
Table of Contents
PwrUp Clean Wireless Phone Charger and Sterilizer Instruction Manual
[BT2-712-2, BT2-751-2]
A. PRODUCT PARTS AND CONTROLS
B. HOW TO USE
- Plug it in: Plug the Micro-USB end of the included power cable into the back of the PwrUp Clean. Plug the other end into a standard 110V household electrical outlet.
- Insert device: Open the lid and set your phone (face up) inside the housing. For specific phone models that can charge wirelessly, be sure that your phone is centered inside the PwrUp Clean. You will know your phone is aligned properly when the phone starts to charge. Charging time for your phone will vary, depending on your phone’s battery level. (It is not necessary to run the sterilization process in order to charge your phone.)
- Sterilize: With the phone inserted in the housing, close the lid and press “DISINFECTION” to begin the ultraviolet sterilization process. Status indicator will show the progress of the sterilization process, which takes 5-10 minutes. Once the sterilization process is complete, open the lid and remove your device. Or, after the sterilization process is complete, you may let your phone continue to charge in the housing for as long as necessary. Note: We do not recommend opening the lid or removing your device prior to the completion of the sterilization process.
- Aromatherapy: Open the lid and add a few drops of aromatherapy essential oil (not included) to the aromatherapy socket in the upper left corner of the housing. Then set your phone in the housing, close the lid and press “AROMATHERAPY”. The aromatherapy process takes 5-10 minutes.
C. CARE AND SAFETY INFORMATION
- A soft cloth or a paper towel may be used to clean this device. Unplug the device from its power source before cleaning. Do not use excess water or any kind of cleaning solvents when cleaning the device.
- Keep the device away from fire sources, wet or high-moisture conditions, and corrosive or flammable chemicals.
- Close the device’s lid before starting the sterilization cycle and keep the lid closed during the entire sterilization cycle. Do not look directly at the ultraviolet lamp when illuminated.
For more information, please visit www.Bracketron.com
PwrUp Clean Wireless Phone Charger and Sterilizer Instruction Manual
[BT2-712-2, BT2-751-2] – Optimized PDF
PwrUp Clean Wireless Phone Charger and Sterilizer Instruction Manual
[BT2-712-2, BT2-751-2] – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>