Laserliner SensoLite 210 Receiver Set Instruction Manual
- June 13, 2024
- Laserliner
Table of Contents
SensoLite 210 Rotary Laser
Instruction Manual
Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of hese instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.
Function / application
Laser receiver for all red rotary lasers
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of
children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
Special product features and functions
The receiver speeds up response times – rapid detection accelerates work
rates.
For many measuring tools, the key to optimum working is magnetic adhesion.
This leaves the hands free to complete other tasks.
Protection against dust and water – The laser receiver is exceptionally well
protected against dust and rain.
1. All-round marking groove
2. Head magnet
3. Receiver field for laser beam
4. Binding screw (rear side)
5. Universal mount
6. Fastening screw for levelling staffs
7. Sound ON / OFF
8. ON / OFF switch
9. Loudspeaker| 10. Switch: Precision range, Free-hand range
11. Battery compartment (rear side)
12. Precision range: Display with smaller tolerance for precision alignment
(e.g. levelling staff)
13. Hand receiver above laser level
14. Precisely on laser level
15. Hand receiver below laser level
16. Low battery indicator
17. Free-hand range: Display with larger tolerance for rough alignment by
hand
18. Volume indicator
---|---
1 Insertion of batteries
Open the battery compartment (11) and insert batteries according to the
symbols. Be sure to pay attention to polarity.
2 Working with the laser receiver
Use the laser receiver for levelling over great distances or in very bright
conditions. Switch it on with button 8.
Set the line laser to hand receiver mode. The laser lines will now pulsate
with high frequency, making the laser lines darker. The laser receiver can
detect these pulsating laser lines up to a maximum distance of 200 m.
Now move the receive field (3) on the laser receiver up and down through the
laser lines until the middle LED lights up. Now mark the reference dimension.
Pay attention that the laser lines are not reflected by reflective surfaces.
Such reflections can lead to false indications.
The light intensity of the
laser lines is greatest at the centre and diminishes toward the ends. This can
reduce the maximum reception range of the laser receiver.
The laser reception range may be reduced if exposed to direct sunlight.
Used with levelling staff
The laser receiver can be fitted on measuring staffs with the universal mount.
The Flexi measuring staff is always recommended when measuring from floor
heights. It also allows you to determine heights directly without any need for
calculation. Danger – powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical
implants (e.g. pacemaker) as well as electromechanical devices (e.g. magnetic
cards, mechanical clocks, precision mechanics, hard disks).
With regard to the effect of powerful magnetic fields on persons, the
applicable national stipulations and regulations must be complied with such as
BGV B11 §14 „electromagnetic fields“ (occupational health and safety –
electromagnetic fields) in the Federal Republic of Germany. To avoid
interference/disruption, always keep the implant or device a safe distance of
at least 30 cm away from the magnet.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Technical data
(Subject to technical alterations. 20W49)
| Necessary rotation speed | 0, 100, 400, 800 rpm |
|---|---|
| Laser reception range | max. 200 m |
| Length of receiver unit | 45 mm |
| Protection class | IP 66 |
| Auto power off | after 5 minutes (if display remains unchanged) |
| Power supply | 4 x 1.5V LR03 (AAA) |
| Operating time | approx. 80 hours |
| Operating conditions | -10°C … 40°C, max. humidity 20 … 85% rH, no |
condensation, max. working altitude 4000 m above sea level
Storage conditions| -20°C … 70°C, max. humidity 80% rH
Weight| 215 g (including batteries / without universal mount)
Dimensions (W x H x D)| 75 x 148 x 22 mm (without universal mount)
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU.
This product is an electric device and must be collected separately for
disposal according to the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AKR.
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
8.028.96.12.1 / Rev20W49
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>