cleverio LB100 Light Bar User Guide
- June 4, 2024
- Cleverio
Table of Contents
LB100 Light Bar
User Guide
Package content
Light strip, table stand, stand mounting screw, hex key, manual.
Mounting
Table lamp
Screw the table stand on the light bar using the included screwand hex key.
Make sure to keep the light bar straight.
Wall lamp
Attach the adhesive tape strips on the back of the light bar.
Clean the mounting surface and stick the light bar to the wall.
Use
Power on/off
Connect the power cable to a USB power adapter (sold separately). The light
bar turns on automatically. Press the power button on the power cable to turn
the light bar off.
Connect to app
-
Find and install the app Smart life – Smart living on the App store or Google Play.
-
Register an account in the app or log in to an existing one.
-
Connect the light bar’s power cable to a USB power adapter (sold separately).
Press the power button on the power cable for 5 seconds until the indicator flashes quickly. -
Press “Add device” in the app, go to “Lighting” and choose “Strip lights (BLE)”.
-
Enter your details for your 2.4 GHz wifi. The app searches for the lamp and confirms when the pairing is successful.
You can now change colors and ambiance, set schedules, connect to your voice
assistant, sync to music, and more in the app.
Note! The pairing procedure might change due to regular app updates. If
the instruction does not correspond with the app interface, please visit
www.kjell.com/51897 -> “Support” for updated
instructions.
Factory reset
Remove the light bar connected to your device by selecting it in the app. Edit
the device by pressing the pen symbol ” ” in the top right corner of the app.
At the bottom of the page press “Remove Device”.
Troubleshooting
The light bar cannot connect to the app.
Make sure your device is connected to a 2.4 GHz wifi with a stable connection.
If you have a dual-band router, your device can automatically connect to the 5
GHz wifi. In this case, your device cannot communicate with the light bar.
The app needs access to your device’s location services. Make sure you have
allowed access to location services while using the app.
The connection to the light bar was lost.
If you recently changed to a new router or renamed your network you need to
reinstall the light bar again. Remove the product connection to your app by
selecting it. Edit the device by pressing the pen symbol ” ” in the top right
corner of the app. At the bottom of the page press “Remove Device”.
Follow the “Connect to app” instructions to add the light bar to your home
network
Safety information
Do not open or modify the light bar in any way. This should only be done by a
qualified technician due to the risk of electric shocks or short circuits.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
www.kjell.com/51897
Specifications
| Input: | 5 V/0.5 A (USB adapter sold separately) |
|---|---|
| Connections: | Wifi and Bluetooth |
| LED Color: | RGB+CCT (2700-6500 K) |
| Brightness: | Up to 120 lumen |
| Size: | 280x45x33 mm |
www.cleverio.se
Box 50435 Malmö
Sweden
2022-09-01
References
- Cleverio | Kjell.com
- Cleverio Air Purifier Smart luftrenare - Luftrenare | Kjell.com
- Cleverio LB100 Light Bar - Cleverio smarta lampor | Kjell.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>